TY - JOUR N2 - AISI 316L/TiB2/2p composites were manufactured by HP-HT using different pressures (5 and 7 GPa) and temperatures (900-1300°C), with constant reinforcing particle content 2 vol%. The mechanical properties of the composites were evaluated on the basis of hardness (HV0.3) and compression tests (20°C, 10−5 s−1). The results showed that the role of sintering pressure increased with increasing process temperature. At temperatures of 900°C and pressures of 5 and 7 GPa the difference in measured values of compressive strength was 1-2%, while at 1300°C they reached 20%. At constant pressure of 5 GPa, a change in hardness and compressive strength of 40% were obtained with a temperature change of 900 to 1300°C. Changes in mechanical properties in the composite occurred without substantial changes in density, microstructure, reinforcement phase distribution, and phase composition in the matrix. L1 - http://czasopisma.pan.pl/Content/113618/PDF/AMM-2019-4-49-Sulima.pdf L2 - http://czasopisma.pan.pl/Content/113618 PY - 2019 IS - No 4 EP - 1592 DO - 10.24425/amm.2019.130130 KW - High Pressure-High Temperature KW - Physical Properties KW - Mechanical properties KW - Steel Matrix Composites KW - Titanium Diboride A1 - Kurtyka, P. A1 - Sulima, Iwona A1 - Hyjek, P. A1 - Jaworska, L. PB - Institute of Metallurgy and Materials Science of Polish Academy of Sciences PB - Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences VL - vol. 64 DA - 2019.12.12 T1 - Influence of High Pressure-High Temperature Method on the Selected Mechanical Properties of Steel AISI 316L with 2% TiB2 SP - 1585 UR - http://czasopisma.pan.pl/dlibra/publication/edition/113618 T2 - Archives of Metallurgy and Materials ER -