TY - JOUR N2 - The fluidity is the term to determine the materials ability to fill the mold cavity properly. Fluidity is complex property with many variables. Up to this date, there is no methodology for defining the fluidity in a semisolid material state. Submitted paper deals with the proposal of a new method designed for aluminium alloy fluidity evaluation in semi-solid state trough the design of the layered construction die. Die will be primary used for fluidity tests of semi-solid squeeze casted aluminium alloy and to observe the pressing force flow by mentioned casting technology. The modularity consists of possibility to change each die segment. In the experiment the die design was evaluated by simulation in ProCAST 11.5 and by production of experimental castings. The die was made by laser cutting technology from construction steel S355JR. Experimental material was aluminium alloy AlSi7Mg0.3. The temperature of the semisolid state was chosen to achieve 35% of solid phase. The result of next study should be a selected parameters observation and their effect on the fluidity of aluminium alloy in semi-solid state. This will be very important step to determine the optimal conditions to achieve a castings with certain wall thickness produced by the method of semi-solid squeeze casting. L1 - http://czasopisma.pan.pl/Content/116490/PDF/AFE%203_2020_12.pdf L2 - http://czasopisma.pan.pl/Content/116490 PY - 2020 IS - No 3 EP - 73 DO - 10.24425/afe.2020.133332 KW - Innovative Foundry Technologies and Materials KW - Solidification process KW - Semi-solid Squeeze Casting KW - Aluminium alloy AlSi7Mg0.3 (A356) KW - Fluidity test KW - Pressing force flow A1 - Martinec, D. A1 - Pastirčák, R. PB - The Katowice Branch of the Polish Academy of Sciences VL - vol. 20 DA - 2020.08.10 T1 - Application of Modular Die for Fluidity Test and Monitoring of the Pressing Force Flow by Semi-solid Squeeze Casting of AlSi7Mg0.3 SP - 69 UR - http://czasopisma.pan.pl/dlibra/publication/edition/116490 T2 - Archives of Foundry Engineering ER -