In this article, the authors present the geometry and measurements of the properties of an acoustic metamaterial with a structure composed of multiple concentric rings. CAD models of the structure were developed and subsequently used in numerical studies, which included the study of resonant frequencies using the Lanczos method and an analysis of sound pressure level distribution under plane wave excitation using the finite element method. Subsequently, experimental tests were carried out on models with the same geometry produced with three different materials (PLA, PET-G, and FLEX) using a fused deposition modeling 3D printing technique. These tests included: determining insertion loss for a single model based on tests using the measurement window of a reverberation chamber and determining transmission loss through tests in a semi-anechoic chamber. Sound wave resonance was obtained for frequencies ranging from 1700 to 6000 Hz. Notably, the experimental studies were carried out for the same structure for which numerical tests were conducted. The physical models of a metamaterial were manufactured using three different readily available 3D printing materials. The results of laboratory tests confirm that the created acoustic metamaterial consisting of multi-ring structures reduces noise in medium and high frequencies.

Ultrasonic haptic technology is one of the more interesting novel technologies being intensively developed in recent years. Such technology has a number of undoubted advantages and potential applications, but it can also be a source of ultrasonic noise. Pursuant to the provisions of the labor law, ultrasonic noise at a high sound pressure level can be a harmful factor for human health. The article presents the results of the assessment of ultrasonic noise emitted by an ultrasonic haptic device and the assessment of exposure to noise of a person using the device. The tests were carried out using one of the haptic devices readily available on the market. Ultrasonic noise emission tests were carried out around the device, at selected points placed on the surface of a hemisphere of a radius of 0.5 m, for various haptic objects. The analyzed parameter was the equivalent sound pressure level in the 1~3 octave band with a center frequency of 40 kHz. Variable sound pressure levels ranged from 96 dB to 137 dB. Noise exposure tests were carried out both using the KEMAR measurement dummy and with test participants of different heights. In most cases, the sound pressure level exceeded 110 dB, and in the worst case it exceeded 131 dB. Comparison of the results of ultrasonic noise assessments with the permissible values of this noise in the working environment shows that in the case of prolonged or improper use of the device, the permissible values may be exceeded.