Abstract
In this study, we tried to understand the horizontal bearing performances of step-tapered piles using numerical simulations. The influence of the geometric parameters, e.g. the diameter ( D) and the distance (L), and the length ( H) of the pile were considered, and the soil distribution imposed on the horizontal bearing capacity of the piles was simulated. Numerical results show that when the other geometrical parameters of step-tapered piles are kept unchanged: (a) the increasing diameter ( D) of the enlarged upper part of step-tapered piles improves the horizontal ultimate bearing capacity of step-tapered piles; (b) reduced distance ( L) improves the horizontal ultimate bearing capacity of the step-tapered piles; (c) Increasing length ( H) of the enlarged upper part of steptapered piles increases the horizontal ultimate bearing capacity; (d) the reduced length ( H) decreases the bending moment of the pile body. Higher soil strength surrounding the enlarged upper part of step-tapered piles can increase the horizontal ultimate bearing capacity of step-tapered piles. The change of soil strengths at the end of the step-tapered piles does not influence the horizontal ultimate bearing capacity of step-tapered piles.
Go to article
Bibliography
[1] M. Ghazavi, O. Tavasoli, “Characteristics of non-uniform cross-section piles in drivability”, Soil Dynamics and Earthquake Engineering 43: pp. 287–299, 2012.
[2] A.M. Rybnikov, “Experimental investigations of bearing capacity of bored-cast-in-place tapered piles”, Foundation Engineering 43: pp. 48–52, 1990.
[3] K.K. Jayantha, D.M. Ian, “Axial response of tapered piles in cohesive frictional ground”, Journal of Geotechnical and Geoenvironmental Engineering 119: pp. 675–693, 1993.
[4] M. Sakr, M.H. El Naggar, M. Nehdi, “Wave equation analyses of tapered FRP–concrete piles in dense sand”, Soil Dynamics and Earthquake Engineering 27: pp. 166–182, 2007.
[5] J.H. Lee, K.H. Paik, D.H. Kim, S.H. Hwang, “Estimation of axial load capacity for bored tapered piles using CPT results in sand”, Journal of Geotechnical and Geoenvironmental Engineering 135: pp. 1284–1294, 2009.
[6] Y.G. Zhan, H. Wang, “Numerical study on load capacity behavior of tapered pile foundations”, Journal of Geotechnical and Geoenvironmental Engineering 17: pp. 1969–1980, 2012.
[7] G.Q. Kong, H. Zhou, H.L. Liu, X.M. Ding, R. Liang, “A simplified approach for negative skin friction calculation of special-shaped pile considering pile-soil interaction under surcharge”, Journal of Central South University of Technology, 21: pp. 3648–3655, 2014.
[8] N. Hataf, A. Shafaghat, “Optimizing the bearing capacity of tapered piles in realistic scale using 3D finite element method”, Geotech Geol Eng 33: pp. 1465–1473, 2015.
[9] F.I. Nabil, “Behavior of step tapered bored piles in sand under static lateral loading”, Journal of Geotechnical and Geoenvironmental Engineering 136: pp. 669–676, 2010.
[10] Y.R. Lv, H.L. Liu, X.M. Ding, G.Q. Kong, “Field tests on bearing characteristics of x-section pile composite foundation”, Journal of Performance of Constructed Facilities 26: pp. 180–189, 2012.
[11] L.X. Xiong, H.J. Chen, “A numerical study and simulation of vertical bearing performance of step-tapered pile under vertical and horizontal loads”, Indian Geotech J 50: pp. 383–409, 2020.
[12] N.F. Ismael, “A behavior of laterally loaded bored piles in cemented sands”, Journal of Geotechnical Engineering 116: pp. 1678–1699, 1990.
Go to article