[1] Lehmann R., Petuchow A., Moullion M., Künzler M., Windel C., Gauterin F., Fluid Choice Based on Thermal Model and Performance Testing for Direct Cooled Electric Drive, Energies, vol. 13, no. 22, 5867 (2020), DOI:
10.3390/en13225867.
[2] Popescu M., Staton D.A., Boglietti A., Cavagnino A., Hawkins D., Goss J., Modern heat extraction systems for power traction machines – A review, IEEE Transactions on Industry Applications, vol. 52, no. 3, pp. 2167–75 (2016), DOI:
10.1109/TIA.2016.2518132.
[3] Tighe C., Gerada C., Pickering S., Assessment of cooling methods for increased power density in electrical machines, 2016 XXII international conference on electrical machines (ICEM), Lausanne, Switzerland, pp. 2626–2632 (2016), DOI:
10.1109/ICELMACH.2016.7732892.
[4] Ponomarev P., Polikarpova M., Pyrhönen J., Thermal modeling of directly-oil-cooled permanent magnet synchronous machine, 2012 XXth International Conference on Electrical Machines, Marseille, France, pp. 1882–1887 (2012), DOI:
10.1109/ICElMach.2012.6350138.
[5] Dan M., Hao J., Qin W., Liao R., Zou R., Mengzhao Z., Liang S., Effect of different impurities on motion characteristics and breakdown properties of insulation oil under DC electrical field, 2018 IEEE International Conference on High Voltage Engineering and Application (ICHVE), Athens, Greece, pp. 1–4 (2018), DOI:
10.1109/ICHVE.2018.8642256.
[6] Popescu M., Goss J., Staton D.A., Hawkins D., ChongY.C., Boglietti A., Electrical vehicles—Practical solutions for power traction motor systems, IEEE Transactions on Industry Applications, vol. 54, no. 3, pp. 2751–62 (2018), DOI:
10.1109/TIA.2018.2792459.
[7] McFadden C., Hughes K., Raser L., Newcomb T., Electrical conductivity of new and used automatic transmission fluids, SAE International Journal of Fuels and Lubricants, vol. 9, no. 3, pp. 519–26 (2016), DOI:
10.4271/2016-01-2205.
[8] Montonen J., Nerg J., Polikarpova M., Pyrhönen J., Integration principles and thermal analysis of an oil-cooled and-lubricated permanent magnet motor planetary gearbox drive system, IEEE Access, vol. 7, pp. 69108–18 (2019), DOI:
10.1109/ACCESS.2019.2919506.
[9] Carlo R.M., de Bruzzoniti M.C., Sarzanini C., Maina R., Tumiatti V., Copper contaminated insulating mineral oils-testing and investigations, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 20, no. 2, pp. 557–63 (2013), DOI:
10.1109/TDEI.2013.6508759.
[10] Carlo R.M., de Sarzanini C., Bruzzoniti M.C., Maina R., Tumiatti V., Copper-in-oil dissolution and copper-on-paper deposition behavior of mineral insulating oils, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 21, no. 2, pp. 666–73 (2014), DOI:
10.1109/TDEI.2013.004121.
[11] Antonov G.I., Working Group 17 (Particles in Oil) of Study Committee 12, Effect of particles on transformer dielectric strength, International Conference on Large High Voltage Electric Systems, Cigré, Paris, France (2000).
[12] Zhang J., Wang F., Li J., Ran H., Huang D., Influence of copper particles on breakdown voltage and frequency-dependent dielectric property of vegetable insulating oil, Energies, vol. 10, no. 7, 938 (2017), DOI:
10.3390/en10070938.
[13] Dan M., Hao J., Liao R., Cheng L., Zhang J., Li F., Accumulation behaviors of different particles and effects on the breakdown properties of mineral oil under DC voltage, Energies, vol. 12, no. 12, pp. 2301 (2019), DOI:
10.3390/en12122301.
[14] Pauli F., Ruf A., Hameyer K., Low voltage winding insulation systems under the influence of high du/dt slew rate inverter voltage, Archives of Electrical Engineering, vol. 69, no. 1, pp. 187–202 (2020), DOI:
10.24425/aee.2020.131767.
[15] Brütsch R., Chapman M., Insulating systems for high voltage rotating machines and reliability considerations, 2010 IEEE International Symposium on Electrical Insulation, San Diego, CA, USA, pp. 1–5 (2010), DOI:
10.1109/ELINSL.2010.5549737.
[16] Dymond J.H., Stranges N., Younsi K., Hayward J.E., Stator winding failures: contamination, surface discharge, tracking, IEEE Transactions on Industry Applications, vol. 38, no. 2, pp. 577–83 (2002), DOI:
10.1109/28.993182.
[17] Rahimi M.R., Javadinezhad R., Vakilian M., DC partial discharge characteristics for corona, surface and void discharges, 2015 IEEE 11th International Conference, Sydney, NSW, Australia, pp. 260–263 (2015), DOI:
10.1109/ICPADM.2015.7295258.
[18] IEC/TR 60664-2-1: 2011 ¸ Cor.:2011, Insulation coordination for equipment within low-voltage systems – Part 2–1: Application guide – Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing (2011).
[19] IEC 60664-1:2007, Insulation coordination for equipment within low-voltage systems – Part 1: Principles, requirements and tests (2007).
[20] IEC 60172:2015, Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires (2015).
[21] IEC 60317-0-1:2013, Specifications for particular types of winding wires – Part 0–1: General requirements – Enamelled round copper wire (2013).
[22] IEC 62631-3-2:2015, Dielectric and resistive properties of solid insulation material – Part 3–2: Determination of resistive properties (DC Methods) – Surface resistance and surface resistivity (2015).
[23] Yang L., Pauli F., Hameyer K., Influence of thermal-mechanical stress on the insulation system of a low voltage electrical machine, Archives of Electrical Engineering, vol. 70, no. 1, pp. 233–44 (2021), DOI:
10.1109/ICPADM.2015.7295258.
[24] Akmal A.S., Borsi H., Gockenbach E., Wasserberg V., Mohseni H., Dielectric behavior of insulating liquids at very low frequency, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 13, no. 3, pp. 532–538 (2006), DOI:
10.1109/TDEI.2006.1657965.
en
pl
