The prediction of strength properties is a topic of interest in many engineering fields. The common tests used to evaluate rock strength include the uniaxial compressive strength test ( UCS), Brazilian tensile strength ( BTS) and flexural strength ( FS). These tests can only be carried out in the laboratory and involve some difficulties such as preparation of the samples according to standards, amount of samples, and the long duration of test phases. This article aims to suggest equations for the prediction of mechanical properties of aggregates as a function of the P-wave velocity ( Vp) and Schmidt hammer hardness ( SHH) value of intact or in-situ rocks using regression analyses. Within the scope of the study, 90 samples were collected in the south of Türkiye. The mechanical properties, such as uniaxial compressive strength, Brazilian tensile strength and flexural strength of specimens, were determined in the laboratory and investigated in relation to P-wave velocity, and Schmidt hardness. Using regression techniques, various models were developed, and comparisons were made to find the optimum models using a coefficient of determination (R²) and p value (sig) performance indexes. Simple and multiple regression analysis found powerful correlations between mechanical properties and P-wave velocity and Schmidt hammer hardness. In addition, the prediction equations were compared with previous studies. The results obtained from this study indicate that the results of simple test methods, such as Vp or SHH values, of rock used for aggregate could be used to predict some mechanical properties. Thus, it will be possible to obtain information about the mechanical properties of aggregates in the study area in a faster and more practical way by using predictive models.

The article presents the results of research on transverse flux machine (TFM) modifications that led to the development of the cogging machine (PMCM) concept and its further evolutions. The transformation process of the cogging machine from a multi-segment to a single-segment modular design has resulted in a structure identical to the known and commonly used fractional slot concentrated winding permanent magnet synchronous machine (FSCW-PMSM). The paper describes the features gained and lost by the modified machine in various transformation stages. An original method for selecting the number of winding modules is also proposed, depending on the number of coils in a module and the pitch of the pole using a separating tooth between the modules.

The paper treats about main problems of one phase DC-AC microinverters that allow single solar cell to be joined with the grid. One of the issues is to achieve high voltage gain with high efficiency in DC circuit, which is necessary for proper operation of inverter. The operating principles, results of practical implementation and investigations on boost-flyback converter, which meets mentioned demands, are presented. (high step-up DC-DC boost-flyback converter for single phase grid microinverter).

With widespread use of pesticides in modern agriculture, the impacts of spray drift have become a topic of considerable interest. The drifting of sprays is a highly complex process influenced by many factors. The paper presents results of experimental research on a drifting cloud of droplets dispersing from aircraft. Experiments were conducted to quantify spray drift from aerial applications of pesticide. Parallel to the blowing wind, the measurement line 800 m long was disposed. The relationships between the relative dose and the distance of drift as well as spray density and its structure on the measuring length have been established.