The author discusses the world-wide regulation of international disputes against the background ofarticle 33 of the United Nations Charter, the UN Convention on the law of the sea from 1982, and other international legal documents. International custom plays a separate role in the determination of international disputes. In a further part of the article, the author interprets among other matters: the character of maritime disputes and the procedure for arbitration; international maritime disputes against the background of the UN Convention on the law of the sea from 1982; the settling of maritime disputes related to property through arbitration.

An optical tomograph in which a tested object is illuminated from five directions has been presented in the paper. The measurements of luminous intensity after changing into discrete signals (0 or 1) in the detectors equipped with 64 optical sensors were subjected to reconstruction by means of the matrix algorithm. Detailed description of the measuring sensor, as well as the principles of operation of the electronic system, has been given in the paper. Optical phenomena occurring at the phase boundary while transmitted through the sensor wall and phenomena inside the measuring space have also been taken into account. The method of the sensor calibration has been analysed and a way of technical solution of the problem under consideration has been discussed. The elaborated method has been tested using objects of the known shape and dimensions. It was found that reconstruction of the shapes of moving bubbles and determination of their main parameters is also possible with a reasonable accuracy.

Contrary to a widespread thesis about the non-cognitive character of religious beliefs, I argue that it is beneficial to highlight and not marginalize the place of religion in the epistemic sphere. At least some religious beliefs (especially theism) can be qualified as true or false. Holding them as true is usually based on the evidence which is not widely accepted. This, however, does not entail that these beliefs are not true. If they are true, then holding them to be true should be seen as rational, despite of the fact, that the supporting evidence does not seem to be strong in the light of current epistemic standards of justification. It does not mean, however, that such beliefs can be hold with the highest assertion if they evoke serious doubts. Changes in religious doctrines and religious pluralism do not constitute a sufficient reason for excluding religion from the epistemic sphere, as a similar situation concerns many academic disciplines, such as philosophy, or psychology.

The structural system of a multiple strip-shaped pillar-roof is common in underground mine exploitation, and research on its mechanics and micro/macroeconomics is meaningful for utilizing strip-shaped pillar resources. A general model of the structural system of a multiple strip-shaped pillar-roof was established, the deformation mechanism of the model was analysed by material mechanics, and the deflection curve equations of the model were obtained. Based on the stress strain constitutive relation of the strip pillar and cusp catastrophe theory, the nonlinear dynamic instability mechanism of the structural system of a multiple strip-shaped pillar-roof was analysed, and the expressions of the pillar width for maintaining the stability of different types of structural systems were derived. The benefits of different structural systems were calculated using micro/macroeconomic theory, the type of the structural system was determined, and different recovery schemes were obtained. Theoretical application research was applied to a large manganese mine, and the results demonstrate that no pillar recovery was needed in 2016, a 9-m wide artificial pillar could be built to replace a pillar in 2017, and the construction of 14-m wide artificial pillars can be conducted in 2018.

Feldspar is a basic requirement for glass, ceramics, and other industries. The presence of iron in feldspar is one of the challenging aspects of feldspar processing. To improve the quality of feldspar for use in various industries, dry magnetic separation is one of the best techniques for reducing iron in feldspar, especially in arid regions to overcome the common problem of lack of water resources as well as to reduce the operational cost of the enrichment process. Therefore, dry magnetic separation experiments were carried out to remove the iron content from feldspar ore in the Wadi Umm Harjal area in Egypt to meet the specifications required for different industries. The sample was analysed using XRD, XRF, and optical microscopy, which revealed that it is a mixture of potassium feldspar (microcline/orthoclase), albite, and quartz in the presence of hematite mineral serving as the main iron impurities in addition to the free silica content. The effect of parameters on the activity of the dry high magnetic separators was investigated in addition to cleaning the products. The iron oxide reduced from 0.69% in the head sample to 0.08% after dry high-intensity magnetic separation, and the whiteness increased from 82.01% in the head sample to 95.97% in the separated concentrate. The experimental results showed that there is a possibility to obtain feldspar concentrates with low content of Fe2O3 from the area where according to the results, approximately 88.4% of iron was removed from the head sample.

The main objective of the article is to present quantified and measurable risks likelihood appearance, impact and significance of inspected and monitored 48 commercial construction projects and their feasibility to be carried out. Original technical, financial and organisational feasibility studies in compliance with a rigorous Bank Investment Supervision requirements have been executed by the author in the period of 2005–2018. Methodology of construction project appraisal for financing and execution professional preparation have been laid out – technical documentation, arrangements, realisation. Analysis and assessment of Bank Investment Supervision consisted of project execution plan PEP, geotechnical and environmental conditions, permit design, agreements and decision impacts of local authorities, engineering contract for construction works, project insurance and performance bonds, schedule of execution tasks and their costs, payment plan, investment budget and project economical effectiveness, scope of monthly construction works execution assessed by Earned Value Method approach and handover procedure of construction project. An attempt was made to express numerically the relationship between risks impacts and their level of likelihood. Also, a method of associating the influence of projects risks impacts on the extent of the likelihood of project risk occurrence which makes possible to determine the direction and the strength of this relationship was presented. Finally, risks likelihood appearance, impact and significance variability of commercial construction projects within last two years of booming investment industry have been determined.