Building a competitive offer is a process spread over many years, in which due to the complexity of market processes taking place both in the country and abroad, the interested entity should participate very actively. The world is changing and with it market conditions or external factors that determine the achievement of success. The efficiency and speed of operations, the flow of information between individual departments of the company, cooperation with regional offices and organizations to carry out joint campaigns or projects are becoming more and more important. However, all this without a permanent market research and observation of competitors’ actions, the company/clinic is getting harder to get or keep the level achieved for a moment. The article is an attempt to present important issues related to building an offer on the market of health and pro-health tourism in times of strong competition and an increasingly fierce fight for a potential client/patient.

Blue infrastructure is not only an element related to rainwater retention in a city but also a factor shaping urban space. As a result of the impact of blue infrastructure on form, function and character of urban space, a unique space is created – an urban blue space. The subject of the article is associated with the blue infrastructure on shape and character of urban spaces, as well as water-land spatial relations within urban blue space. Author of the article analised spatial relations occurring in port cities between aquatic and terrestrial space from perspective of the land, but also water, which is an equally important part of city’s area. As a result models of two-dimensional water-land relations have been recognised and described.

The problem of regional diversity is the subject of a broad scientific discourse. The dynamics of territory development is connected with many factors. Among them, the so-called spaces for development opportunities of individual units and resiliance issues for external factors of regions. The author discusses the diversity of individuals from the point of view of these two factors. It indicates future directions of regional research, which will show why regions at the start with potentially the same structure are developing completely differently and why in most cases resistance is associated with innovation and in the case of Polish regions it is not.

The article deals with the subject of an important component of energy management, which is the performance of energy efficiency audits in companies. Using the case study analysis, the role of the energy audit was analyzed in the context of improvement of energy efficiency in selected production companies. The essence of legal requirements following from the implementation of the amended Energy Efficiency Act was presented. Specifically, problems and challenges, which refer to the method of implementation of the audit obligation in economic practice, were discussed. Furthermore, the issue of quality and usefulness (in the decision-making process) of prepared reports was raised. It was found that there were indications to claim that the obligatory energy audit of companies is not an instrument for the improvement of energy efficiency, which is always used optimally. The fault in this situation is partly attributable to the state, audit bodies and the company management. In this case, not only is the ineffective communication an issue here, but also the insufficient level of knowledge regarding energy management, as well as haste. The amendment of the Energy Efficiency Act (within just one year) imposed the necessity to conduct an energy audit on a specific group of companies. In principle, because all the entities, to which the obligation referred, had to take actions almost at the same time, numerous issues appeared. Some managers learned about the obligation to conduct the audit from companies who themselves had come out with a proposal to carry it out. This proves the lack of the proper information flow between the government administration authorities and the companies. Again, it turned out that practitioners did not keep pace with the implementation of actions, which were a consequence of numerous (and not always well thought-out) changes in the law. Haste in the fulfillment of the statutory obligation affected a high price spread of the bids sent during tenders, related to the performance of an energy audit. Bureaucratic regulations regarding tenders became another obstacle in the correct performance of the tasks. The entrepreneurs themselves, without clear guidelines on what to expect after the performed energy audit and what a report should look like, on many occasions, selected the “cheapest” bid – not always thinking too much about the qualitative consequences of such a decision. Some certifying bodies – taking advantage of an opportunity and the satisfactory combination of circumstances – offered unprofessional audit services of questionable quality. In the presented conditions, it is difficult to expect real, systemic and desirable results (economically, ecologically and socially) with regards to the energy efficiency both in the micro-, meso- and macr-economic scale. It is worth considering changes in the Energy Efficiency Act and spread the obligation to perform audits over different years according to clearly defined (in cooperation with business) criteria. If relevant actions are not taken, the situation of a temporary Eldorado on the market of energy audits will repeat in 4 years. Again, the consequence may be the poor quality and questionable usefulness of reports from energy audits of companies both at the business level and the ecological-political level. It is necessary to counteract all forms of unfair competition to interdisciplinary and specialist bodies which take actions to improve the energy efficiency of organisations. The creation of appropriate business conditions will have a positive impact on the improvement of energy efficiency. In this context, it is necessary to take actions, which enable the optimization of both the process of the implementation of obligatory legal regulations and voluntary (industry) norms and standards.

Coal mining is one of the most important sectors of the Polish industry. It can be said that the coal is a national raw material. This results in Poland being a pioneer in the European Union in terms of coal mining as well as its use in the production of electricity and heat. There are many companies in Poland which have been established and developed around the coal mining industry aimed at coal extracting. The operations of those companies depends on the condition of the mining companies and their cooperation with them: commercial, service and advisory, called referred to as “mining supporting companies”. The article focuses on the results of a survey carried out in mining supporting companies, such as mining machinery and equipment manufacturers, mining-related service companies and mining-related research and development institutions. The authors evaluated the relationship and dependence of those companies on the mining industry. It was assumed that the measure of the mining supporting companies condition is the overall quantity of public related payments contributed to the state budget and local budgets. In the article, the authors raised the problem of the size of losses for public finances, as a result of the significant limitations of financial flows from the mining companies. The surveyed companies are those associated with the Polish Mining Chamber of Industry and Commerce. As a result, the authors prepared conclusions regarding the dependence of the mining supporting companies on the situation of the mining subsector.

Recent works of the authors, concerning the future of urban regions, are synthesised in the paper. Three methodological paths – focused on exploring and creating the future of urban regions – are the backbone of the presented work. Within the fi rst path, creation of regional future by applying the concept of intellectual and strategic challenges is recommended. Second path introduces a new perspective for the future, based upon vehicles. A new philosophy of urban and regional growth emerges here. Third path is a new approach towards creation of regional specialisations in a contemporary notion of technological and creative economy.

This paper describes an analysis of the effects of both foreign exchange (FX) risk and interest rate risk on installments of the housing FX loan using classic comparative statics approach. By focusing on sensitivity of annuity with respect to infinitesimal changes of parameters it presents the impact of the interest rate and FX rate on installments in terms of their shares of the total outstanding in foreign currency, and illustrates using values, in Polish zlotys, for three example loans extended during the period when Poland saw its most intensive FX lending. This analysis represents an attempt to answer a question frequently raised in this country of late: does the issue of debt servicing housing FX loans matter for borrowers and therefore could affect banks’ loan portfolio quality?

News might trigger jump arrivals in financial time series. The “bad” news and “good” news seem to have distinct impact. In the research, a double exponential jump distribution is applied to model downward and upward jumps. Bayesian double exponential jump-diffusion model is proposed. Theorems stated in the paper enable estimation of the model’s parameters, detection of jumps and analysis of jump frequency. The methodology, founded upon the idea of latent variables, is illustrated with simulated data.

Chromium ore is treated as an important strategic raw material. It is used by many branches of the industry. The most important applications are metallurgical, refractory and chemical. Unfortunately, no chromium ore deposits have been found in Poland until now, with the exception of two chromium ore sites described in the Lower Silesia region. These concentrations are formed by chromitite, which is rock consisting mainly of chromian spinel. They are localized within so called Sudetic Ophiolite rocks along the edge of the Góry Sowie Massif. They form typical podiform deposits, which are characterized by the high Al content of the rock. The first locality, near Tąpadła village (the Gogołów-Jordanów Massif), is better known. The ore was exploited here at the turn of the19th century and at the beginning of the 20th century. According to the literature, 3500 tons of the ore was obtained - all the resources at this location. The second locality, situated at the Braszowice-Brzeźnica Massif, was never studied and described properly, falling into obscurity since the 19th century. During the field work at the Braszowice-Brzeźnica Massif, the author has found numerous chromium ore fragments among the debris. The rising prices of chromium on the world's markets suggest that it is reasonable to study the ore quality and overall resource potential of this deposit. The preliminary studies have shown that chromitities from Braszowice are typical ores of the podiform variety, the majority texturally massive and nodular. The chemical analyses of the primary chromianspinels grains revealed that they could be treated as refractory chromite (38% wt. of Cr2O3, lower than 30% wt. of Al2O3, and Cr/Fe ratio about 3:1). However, the metamorphic processes modified the primary chemical composition of the studied ore. They caused enrichment in Fe and Cr, and a decrease in Al in comparison to the primary ore. Moreover, the whole rock chemical analyses revealed that the content of the main elements is insufficient to use the ore without enrichment processes. Furthermore, the size and number of the potential ore bodies are presumably small. Consequently, both the chemical composition and the resources of the chromium ores from the Braszowice–Brzeźnica Massif are insufficient to allow for profitable exploitation, despite the high price of chromium.

The industrial grinding devices, which work in the high-energetic fluidized bed conditions make it possible to obtain guaranteed particle size distribution of product and decrease of consumption energy. The matrix model for transformation of particle size distribution in the fluidized bed opposed jet mill is presented in the part IV of article. The proposed model contains the mass population balance of particle equation, in which are block matrices: the matrix of circuit M, the matrix of inputs F and the matrix of feed F0. The matrix M contains blocks with the transition matrix P, the classification matrix C, the identity matrix I and the zero matrix 0. The matrix was marked using with discrete forms of the selection and breakage functions, mean while the matrices of classification - using the equation, describing classification of grains in the grinding chamber of mill. In paper was discussed this model in details (part 2.1). The correctness of received form of the selection and breakage functions was confirmed. The method determination of the transition matrix for fluidized-jet grinding of grains (part 2.2) and the classification matrix for gravitational and centrifugal zones of grains (part 2.3) are presented. The verification of model obtained on basis results with experimental investigations, which were performed on a laboratory fluidized bed opposed jet mill. The experiment contained grinding of selected narrow size fractions of limestone in turbulent fluidized layer conditions, what in part I and part II of article (Zbroński, Górecka-Zbrońska 2007a, b) are presented. The parameters of parametric identification were: factor of proportionality - contained in the equation on the discrete form of selection function and sizes of limiting grains - contained in equation on the diagonal elements of classification matrix for stage of gravitational and centrifugal (part 3). The classic Fisher-Snedecor test was applied for estimation of prediction particle size distribution of grinding product (part 4). The significant divergences between numerical and experimental results of particle size distribution weren't affirmed. The experimental verification, parametric identification and statistical estimation of the proposed model showed that this model make it possible to forecasting particle size distribution of grinding product.

This article presents the history of mining for rock raw materials in the Cieszyn area since the beginning of the 20th century. The study assessed the possibility of continuing these activities in relation to the ongoing enlargement of conservation areas. The conflict between mining these deposits and environmental interests was described. The results of the analysis allowed for the identification of potential sites for further exploitation of Godula Sandstone and Cieszyn Limestone. The study used analog and digital data which were subjected to the procedures specific to the GIS (Geographic Information System) methods. The exploitation of Cieszyn Shale and Limestone played an important role in the first half of the 20th century. They were used for the production of lime and cement. However, the importance of these materials decreased gradually due to declining demand and quality. In later years, after the closure of the cement plant in Goleszów, limestone was used only for aggregate production. Natural aggregates and clay raw materials were initially exploited in small excavations based on local needs, and later in an organized manner with documented deposits. At present, mining of these materials has been discontinued. The centuries-old tradition of Godula Sandstone block production was maintained during the last hundred years. In the last decade, their extraction was conducted in the original quarry, as well as several new quarries. Additional resources have been documented at other locations. Because of the nature of the product, such extraction (in small quarries, without the use of blasting agents) does not significantly affect wildlife. Moreover, the locations of current and former mining operations often become tourist attractions. This is evidenced by the fact that the documentation sites are established on the basis of such excavations. Numerous objects of protection established in recent years have led to a major conflict between the exploitation of rock materials and the environment. This prevents development or even the continuation of exploitation. Therefore, in future planning processes, efforts must be made to characterize mineral deposits as a part of nature, requiring protection.

The worldwide consumption of wollastonite has been increasing from day to day. It is a calcium metasilicate with the chemical formula CaSiO3. Wollastonite is the only naturally occurring, nonmetallic, white mineral that is needle-shaped in a crystal habit. Due to its high chemical and thermal resistance and nontoxic properties, wollastonite replaces asbestos. Apart from this, the acicular property of wollastonite allow it to compete with other acicular materials where improvements in dimensional stability, flexural modulus and heat deflection are sought. Due to its unique properties such as: its high brightness and whiteness, low moisture and oil absorption, low volatile content, and acicular properties, it is used also as a filling material for ceramics, plastics and paints, thermal and electrical insulator, wetting agent and smelter for glaze. Three methods are used for the beneficiation of wollastonite: mechanical sorting, dry or wet magnetic separation and flotation. Magnetic separation and flotation can be applied together in some cases. In this study, flotation has been investigated for the selective separation of calcite-rich wollastonite ores from the Buzlukdağ deposit, in the Kırşehir-Akpınar region, in the middle of Anatolia. The mineralogical analysis of the sample used in the study shows that the ore sample contains 60–62% wollastonite (CaSiO3), 4–5% augite (Ca,Na)(Mg,Fe,Al)(Si,Al)2O6, 30–32% calcite (CaCO3) and minor amount of other minerals. As a result of this study, the wollastonite concentrate which contains 0.44% Fe2O3, 52.71% SiO2, 87.85% wollastonite with 0.60% loss on ignition (using 1500 g/t potassium oleate) was obtained. The ultimate grade concentrates of calcite that can also be obtained as by-products are with 99.80% calcite content and 85.4% recovery.

The paper describes experimental research on a resistojet type rocket thruster which was built as an actuator in the Attitude Control System of a model space robotic platform. A key element of the thruster is the heater responsible for increasing the temperature of the working medium in the thruster chamber and hence the specific impulse. This parameter describes the performance of the thruster, increases providing – for lower propellant consumption – the same propulsion effect (thrust). A high performance thruster means either total launch mass can be reduced or satellite lifetime increased, which are key commercial factors. During the first phase of the project, 7 different heating chamber designs were examined. The heater is made of resistive wire with resistivity of 9Ω/m. Power is delivered by a dedicated supply system based on supercapacitors with output voltage regulated in the range of 20–70 V. The experimental phase was followed by designing the chamber geometry and the heating element able to deliver both: maximum increase of gas temperature and minimum construction dimensions. Experiments with the optimal design show an increase in temperature of the working gas (air) by about 300 ◦C giving a 40% increase in specific impulse. The final effect of that is a 40% reduction in mass flow rate while retaining thrust at a nominal level of 1 N.

In this work, numerical modeling of steady state heat and mass transfer is presented. Both laminar and hydrodynamically fully developed turbulent flow in a pipe are shown. Numerical results are compared with values obtained from analytical solution of such problems. The problems under consideration are often denoted as extended Graetz problems. They occur in heat exchangers using liquid metals as working fluid, in cooling systems for electric components or in chemical process lines. Calculations were carried out gradually decreasing the mesh size in order to examine the convergence of numerical method to analytical solution.

In the 21st century the way to increase the efficiency of new sources of energy is directly related with extended exploration of renewable energy. This modern tendency ensures the fuel economy needs to be realized with nature protection. The increasing of new power sources efficiency (cogeneration, trigeneration systems, fuel cells, photovoltaic systems) can be performed by application of solid sorption heat pumps, regrigerators, heat and cold accumulators, heat transformers, natural gas and hydrogen storage systems and efficient heat exchangers.