In the plankton samples, collected with a Nansen net in three water layers downwards to a depth of 500 m, larvae and eggs of Euphausia superba were found as well as the larvae of E. crystallorophias and E. frigida. Eggs of the species E. superba predominated and among the larvae most numerous were calyptopis I and metanauplius stages. Eggs and larvae of E. superba occurred in small quantities, mainly in Bransfield Strait. Larvae of E. crystallorophias were found in the southeastern part of Bransfield Strait. Metanauplius, calyptopis I and II stages were predominant. Larvae of E. frigida, mostly calyptopis I stage, were very scarce and occurred only at the stations located in Drake Passage.
On the basis of measurements of the depth of occurrence of 11000 krill aggregations and the biological analyses of these animals and measurements of some environmental factors the diurnal vertical distribution of aggregations is presented against the background of various environmental conditions. Vertical distribution of aggregations is closely related to the feeding rhythm of krill. Active vertical migrations have been recorded at civil twilight. The increasing and decreasing rate of aggregations in those periods is described.
The aim of this paper is twofold: to estimate the unsteady pressure-flow variations in gas transmission pipelines using the ensemblebased data assimilation approach and to analyse the strength of steel tubes reinforced with composite sleeves containing localized part-wall thickness loss caused by corrosion while taking into consideration a safe operating pressure of the pipeline. For a steel thin-walled cylinder containing a partwall metal loss, a flexible wrap of fibreglass as well as carbon glass with epoxy resin are determined. The strength of the repaired pipeline with two kinds of materials for sleeves is investigated taking into consideration the internal pressure at the defect location. For the case study, a section of the Yamal transit pipeline on the Polish territory is selected. The results enable pipeline operators to evaluate the strength of corroded steel pipelines and develop optimal repair activities, which are of vital importance for the maintenance and operation of underground steel networks.
This paper focuses on three issues. First, it is about the context and environment of pre-Nicene theology. It is emphasized that pre-Nicene theology did not neglect ca-techetical and liturgical reflection (ad intra) while at the same time successfully ente-red into a critical and creative dialogue with both the Semitic and Greco-Roman world where first Christians lived (ad extra). For contemporary theology its means that it cannot reject historical reasoning, placed in space and time. The second part stresses that, in spite of different situations and all historical and cultural contexts, theology before Nicea was above all an understanding of Sacred Scripture to which the key is the Risen Christ as the source and definitive fulfilment of the inspired writings. Finally, the third part of the paper focuses on the existential and spiritual experience from which pre-Nicene theology originated. For this theology the Gospel of Christ is not just the rule of faith but also the rule of life. This leads to a conclusion that a contem-porary theologian is a to take up an existential-personalistic reflection on Revelation using the historical-hermeneutic method .
In the plankton samples collected with a Bongo net besides Euphausia superba the following species of the Euphausiacea were found:. £. frigida, crystallorophias, E. triacantha and T. macrura. The most aboundant and most frequently caught species was T. macrura equally distributed throughout the research area. The species E. frigida also occurred regularly though in much smaller numbers. E. triacantha occurred sporadically, mainly in the western part of the research region, and E. crystallorophias only at two stations in the Bransfield Strait. Some aspects of the biology and ecology of the mentioned above species are presented in this study.
Distribution and population age structure of krill Euphausia superba larvae is presented for four consequent years on the basis of the summer materials from 1976 to 1979. An approximate rate of growth of krill larvae was calculated on the basis of the above observations and the literature data on the occurrence of particular larval stages. This allowed to determine the main period of krill breeding in particular years. Intense breeding of krill took place from January to middle of March in summers 1976/1977 and 1977/1978, but much earlier — mid November to mid January in 1975/1976. In summer of 1978/1979 the breeding of krill was poor till March.
The knowledge about membrane contactors is growing rapidly but is still insufficient for a reliable designing. This paper presents a new type of membrane contactors that are integrated with one of the following ways of separation by using absorbents, micelles, flocculants, functionalized polymers, molecular imprints, or other methods that are based on aggregation. The article discusses methods for designing multi-stage cascade, usually counter-current. At every stage of this cascade, relevant aggregates are retained by the membrane, while the permeate passes freely through membrane. The process takes place in the membrane boundary layer with a local cross-flow of the permeate and the retentate. So the whole system can be called a cross-counter-current. The process kinetics, k, must be coordinated with the permeate flux, J, and the rate of surface renewal of the sorbent on the membrane surface, s. This can be done by using ordinary back-flushing or relevant hydrodynamic method of sweeping, such as: turbulences, shear stresses or lifting forces. A surface renewal model has been applied to adjust the optimal process conditions to sorbent kinetics. The experimental results confirmed the correctness of the model and its suitability for design of the new type of contactors.
The excellent property combination of thin wall ductile iron castings (TWDI), including thin wall alloyed cast iron (e.g. austenitic TWDI) has opened new horizons for cast iron to replace steel castings and forgings in many engineering applications with considerable cost benefits. TWDI is considered as a potential material for the preparation of light castings with good mechanical and utility properties, the cost of which is relatively low. In this study, unalloyed and high Ni-alloyed (25% Ni) spheroidal graphite cast iron, with an austenitic metallic matrix were investigated. The research was conducted for thin-walled iron castings with 2, 3 and 5mm wall thickness, using different mould temperature (20°C, and 160°C) to achieve various cooling rates. The metallographic examinations i.e. characteristic of graphite nodules, metallic matrix, and primary grains of austenite dendrites (in high-nickel NTWDI) and mechanical properties were investigated. The study shows that homogeneity of the casting structure of thin-walled castings varies when changing the wall thickness and mould temperature. Finally, mechanical properties of thin-walled ductile iron castings with ferritic-pearlitic and austenitic metallic matrix have been shown.
In the investigated area krill occured in low abundance. It was recorded mainly above the shelf and above the continental slope close to the Palmer Archipelago and near the northern shores of Elephant Island. In the central part of the Bransfield Strait E. superba was caught in especially small quantities. In general krill of small size occurred, the size decreasing from the west to the east. Mature krill was dominan in the western part of the investigated area, whereas juveniles in the eastern part. Gravid females were caught very rarely.
Macrozooplankton was collected at 63 stations by means of a Bongo sampler in the layer from the surface to a depth of 200 m. Wet formalin volume of siphonophors, polychaetes, pteropods, copepods, amphipods, euphausiids, chaetognaths, salps, and the remaining animals was determined; the distribution of major species was presented. Low diversity in macrozooplankton composition was observed in the study area. As far as biomass was concerned, salps predominated in the whole area; they occurred in exceptionally large quantities Large amounts of krill were also observed in some areas. Besides salps and krill, other euphausiids had the greatest share in the zooplankton; they were more abundant than copepods. Macrozooplankton biomass without salps and krill was low when compared with the values known from literature.