[1] Islam S., Islam M.S., Abedin M.Z.: Review on heat transfer enhancement by louvered fin. Int. J. Eng. Mater. Manufact. 6(2021), 60–80.
[2] Muszynski T., Kozieł S.M.: Parametric study of fluid flow and heat transfer over louvered fins of air heat pump evaporator. Arch. Thermodyn. 37(2016), 3, 45–62.
[3] Dodiya K., Bhatt N., Lai F.: Louvered fin compact heat exchanger: a comprehensive review. Int. J. Amb. Energ. (2020).
[4] Wan R., Wang Y., Kavtaradze R., Ji H., He X.: Research on the air-side thermal hydraulic performance of louvered fin and flat tube heat exchangers under low-pressure environment. Exp. Heat Transfer 33(2020), 1, 81–99.
[5] Gunnasegaran P., Shuaib N.H., Abdul Jalal M.F.: The effect of geometrical parameters on heat transfer characteristics of compact heat exchanger with louvered fins. ISRN Thermodyn. (2012), 1–10.
[6] Djamal H.D., Woon Q.Y., Suzairin M.S., Hisham Amirnordin S.: Effects of geometrical parameters to the performance of louvered fin heat exchangers. Appl. Mech. Mater. 773-774(2015), 398–402.
[7] Amirnordin S.H., Didane H.D., Norani Mansor M., Khalid A, Suzairin M.S., Raghavan V.R.: Pressure drop and heat transfer characteristics of louvered fin heat exchangers. Appl. Mech. Mater. 465-466(2014), 500–504.
[8] Chan Kang H., Jun G.W.: Heat transfer and flow resistance characteristics of louver fin geometry for automobile applications. J. Heat Transfer. 133(2011), 1–6.
[9] Okbaz A., Olcay A.B., Cellek M.S., Pinarbasi A.: Computational investigation of heat transfer and pressure drop in a typical louver fin-and-tube heat exchanger for various louver angles and fin pitches. EPJ Web Conf. 143(2017), 02084.
[10] Park J.S., Kim J., Lee K.S.: Thermal and drainage performance of a louvered fin heat exchanger according to heat exchanger inclination angle under frosting and defrosting conditions. Int. J. Heat Mass Transf. 108(2017), 1335–1339.
[11] Liu X., Chen H., Wang X., and Kefayati G.: Study on surface condensate water removal and heat transfer performance of a minichannel heat exchanger. Energies 13(2020), 5, 1065
[12] Saleem A., Kim M.H.: CFD analysis on the air-side thermal-hydraulic performance of multi-louvered fin heat exchangers at low Reynolds numbers. Energies 10(2017), 6, 1–24.
[13] Bohdal T., Charun H., Sikora M.: Heat transfer during condensation of refrigerants in tubular minichannels. Arch. Thermodyn. 33(2012), 2, 3–22.
[14] ASHRAE: ANSI/ASHRAE Standard 41.2-1987: Standard Methods for Air Velocity and Airflow Measurement (2018).
[15] Manual Ansys-CFX, Release 2020 R2. http://www.ansys.com (accessed 15 July 2020).
[16] Jasinski P.B., Kowalczyk M.J., Romaniak A., Warwas B., Obidowski D., Gutkowski A.: Investigation of thermal-flow characteristics of pipes with helical micro-fins of variable height. Energies 14(2021), 8, 2048.
[17] Kang, Hie-Chan & Jun, Gil.: Heat transfer and flow resistance characteristics of louver fin geometry for automobile applications. J. Heat Transf. 133 (2011), 101802.

[1] Where the Energy Goes: Electric Cars. US DOE, US EPA. https://www.fueleconomy.gov/feg/atv-ev.shtml (accessed 20 March 2021).
[2] Simmonds N., Pitman J., Tsoutsanis P., Jenkins K., Gaylard A., Jansen W.: Complete body aerodynamic study of three vehicles. SAE Tech. Pap. (2017), 2017-01-1529.
[3] Ahmed S.R. Ramm G., Faltin G.: Some salient features of the time-averaged ground vehicle wake. SAE Transactions 93(1984), 2, 840222–840402, 473–503.
[4] Buchheim R., Deutenbach K.-R., Lückoff H.-J.: Necessity and premises for reducing the aerodynamic drag of future passenger cars. SAE Transactions 90(1981), 1, 810010–810234, 758–771.
[5] Cooper K.R., Bertenyi T., Dutil G. Syms, J. Sovran G.: The aerodynamic performance of automotive underbody diffusers. SAE Tech. Pap. (1998), 980030, 150–179.
[6] Potthoff J.: The aerodynamic layout of UNICAR research vehicle. In: Proc. Int. Symp. on Vehicle Aerodynamics, Wolfsburg, 1982.
[7] Katz J.: Race Car Aerodynamics: Designing for Speed. Bentley, 1995.
[8] Hucho W.: Aerodynamics of Road Vehicles. From Fluid Mechanics to Vehicle Engineering. Butterworth-Heinemann, 1987.
[9] Katz J.: Automotive Aerodynamics. Wiley, 2016. [10] Shinde, Gopal, Aniruddha Joshi, Kishor Nikam.: Numerical investigations of the drivAer car model using opensource CFD solver OpenFOAM. Tata Consult. Serv., Pune, 2013.
[11] DrivAer Model. https://www.mw.tum.de/en/aer/research-groups/automotive/drivaer/ (accessed 15 Apr. 2021).
[12] Jakirlic S., Kutej L., Hanssmann D., Basara B., Tropea C.: Eddy-resolving simulations of the notchback ‘DrivAer’ model: Influence of underbody geometry and wheels rotation on aerodynamic behaviour. SAE Tech. Pap. (2016), 2016-01-1602.
[13] abois M., Lakehal D.: Very-large eddy simulation (V-LES) of the flow across a tube bundle. Nucl. Eng. Des. 241(2011), 6, 2075–2085.
[14] Heft A.: Aerodynamic investigation of the cooling requirements of electric vehicles. PhD thesis, Technische Universität München, Munich 2014.
[15] Heft A.I., Indinger T. Adams N.A.: Introduction of a new realistic generic car model for aerodynamic investigations. SAE Tech. Pap. (2012), 2012-01-0168.
[16] Janssen L.J., Hucho W.H.: The effect of various parameters on the aerodynamic drag of passenger cars. In: Advances in Road Vehicle Aerodynamics (H.S. Stevens, Ed.), 1973. 223-254.
[17] Wright P.G.: The influence of aerodynamics on the design of Formula One racing cars. Int. J. Vehicle Des. 3(1982), 4, 383–397.
[18] Eagle Two. http://lodzsolarteam.p.lodz.pl/index.php/eagle-two/ (accessed 3 May 2021).
[19] Lanfrit M.: Best Practice Guidelines for Handling Automotive External Aerodynamics with Fluent. Fluent Deutschland, Darmstadt 2005.
[20] Ansys Fluent Mosaic – new mesh generation technology incorporating hexahedral and polyhedral elements. Symkom, Łódz 2019. https://symkom.pl/ansys-fluent-mosaic/ (accessed 16 March 2021).
[21] Ansys: Ansys Fluent User’s Guide. 2013.
[22] Schlichting H.: Boundary-Layer Theory. McGraw Hill, 1979.
[23] Miao L., Mack S., Indinger T.: Experimental and numerical investigation of automotive aerodynamics using DrivAer model. In: Proc. ASME 2015 Int. Design Engineering Technical Conferences and Computers and Information in Engineering Conf., Boston, Aug. 2–5, 2015. V003T01A039. ASME.
[24] Heft A.I., Indinger T., Adams N.A.: Experimental and numerical investigation of the DrivAer model. In: Proc. Fluids Engineering Division Summer Meeting, Rio Grande, July 8–12, 2012, FEDSM2012-72272, 41–51. ASME.
[25] Heft A.I., Indinger T., Adams N.: Investigation of unsteady flow structures in the wake of a realistic generic car model. In: Proc. 29th AIAA Applied Aerodynamics Conf., June 2011, 3669.
[26] Ashton N., West A., Lardeau S., Revell A.: Assessment of RANS and DES methods for realistic automotive models. Comput. Fluids 128(2016), 1–15.
[27] Guilmineau E., Deng G., Leroyer A., Queutey P., Wackers J., Visonneau M. (2016, June): Assessment of RANS and DES methods for the Ahmed body. In: Proc. ECCOMAS Cong. 2016 VII Eur. Cong. on Computational Methods in Applied Sciences and Engineering (M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris, Eds.), Crete Island, 5-10 June 2016.
[28] Menter F.R.: Zonal two equation k − ! turbulence models for aerodynamic flows. In: Proc. 23rd Fluid Dynamics, Plasmadynamics, and Lasers Conf., Orlando, 6–9 July 1993, AIAA-93-2906.
[29] Ansys Inc.: Ansys Fluent 12.0 Theory Guide, 2009.
[30] Menter F.R.: Two-equation eddy-viscosity turbulence models for engineering applications. AIAA J 32(1994), 8, 1598–1605.
[31] Sobczak K.: Numerical investigations of an influence of the aspect ratio on the Savonius rotor performance. J. Phys. Conf. Ser. 1101(2018), 1, 012034.
[32] Huang P.G., Bardina J., Coakley T.: Turbulence modeling validation, testing, and development. NASA Tech. Memorand. (1997), 110446, 147.
[33] Pawłucki M., Krys M.: CFD for Engineers. Helion, Gliwice 2020.

[1] IGU IGU. World LNG report. International Gas Union (IGU), Barcelona 2017.
[2] Khan M.S., Lee M.: Design optimization of single mixed refrigerant natural gas liquefaction process using the particle swarm paradigm with nonlinear constraints. Energy 49(2013), 146–155.
[3] Romero Gómez M., Ferreiro Garcia R., Romero Gómez J., Carbia Carril J.: Review of thermal cycles exploiting the exergy of liquefied natural gas in the regasification process. Renew. Sust. Energ. Rev. 38(2014), 781–795.
[4] Szargut J., Szczygieł I.: Utilization of the cryogenic exergy of liquid natural gas (LNG) for the production of electricity. Energy 34(2009), 7, 827–837.
[5] Maertens J.: Design of Rankine cycles for power generation from evaporating LNG. Int. J. Refrig. 9(1986), 3, 137–143.
[6] Qiang W., Yanzhong L., Jiang W.: Analysis of power cycle based on cold energy of liquefied natural gas and low-grade heat source. Appl. Therm. Eng. 24(2004), 4, 539–548.
[7] Kim C.W., Chang S.D., Ro S.T.: Analysis of the power cycle utilizing the cold energy of LNG. Int. J. Energ. Res. 19(1995), 9, 741–749.
[8] Chiu C.-H., Cords M., Kimmel Ohishi M., Kikkawa Y.: Efficient power recovery in LNG regasification plants. In: Proc. 11AIChE Spring Meeting and 7th Global Cong. on Process Safety, Chicago, March 13-17, 2011.
[9] Griepentrog H., Sackarendt P.: Vaporization of LNG with closed-cycle gas turbines. In: Proc. ASME 1976 Int. Gas Turbine and Fluids Engineering Conf., New Orleans. March 21-25, 1976. V01AT01A038.
[10] Krey G.: Utilization of the cold by LNG vaporization with closed-cycle gas turbine. ASME J. Eng. Power. 102(1980), 225–230.
[11] Arsalis A., Alexandrou A.N.: Effective Utilization of Liquefied Natural Gas for Distributed Generation. Nova Science, 2015.
[12] Zhang H., Shao S., Zhao H., Feng Z.: Thermodynamic analysis of a SCO2 partflow cycle combined with an organic Rankine cycle with liquefied natural gas as heat sink. In: Proc. ASME Turbo Expo 2014: Turbine Technical Conf. Expo., Düsseldorf, June 16–20, 2014, V03BT36A012.
[13] Subramanian R., Berger M., Tunçer B.: Energy recovery from LNG regasification for space cooling-technical and economic feasibility study for Singapore. In Proc. 2017 Asian Conf. on Energy, Power and Transportation Electrification (ACEPT), Oct. 24–26, 2017.
[14] Wang J., Dai Y., Sun Z., Ma S.: Parametric analysis of a new CCHP system utilizing liquefied natural gas (LNG). In: Proc. ASME Turbo Expo 2010: Power for Land, Sea, and Air, Glasgow. June 14–18, 2010, 77–86.
[15] Mehrpooya M.: Conceptual design and energy analysis of novel integrated liquefied natural gas and fuel cell electrochemical power plant processes. Energy 111(2016), 468–483.
[16] Kowalska M., Pazdzior M.: LNG as an alternative fuel for food industry. Przemysł Spozywczy 71(2017) (in Polish).
[17] Szczygieł I., Stanek W., Szargut J.: Application of the Stirling engine driven with cryogenic exergy of LNG (liquefied natural gas) for the production of electricity. Energy 105(2016), 25–31.
[18] Bulinski Z., Szczygieł I., Krysinski T., Stanek W., Czarnowska L., Gładysz P., Kabaj A.: Finite time thermodynamic analysis of small alpha-type Stirling engine in non-ideal polytropic conditions for recovery of LNG cryogenic exergy. Energy 141(2017), 2559–2571.
[19] Szczygieł I. Bulinski Z.: Overview of the liquid natural gas (LNG) regasification technologies with the special focus on the prof. Szargut’s impact. Energy 165(2018), 999–1008.
[20] Stanek W., Simla T., Rutczyk B., Kabaj A., Bulinski Z., Szczygieł I., Czarnowska L., Krysinski T., Gładysz P.: Thermo-ecological assessment of Stirling engine with regenerator fed with cryogenic exergy of liquid natural gas (LNG). Energy 185(2019), 1045–1053.
[21] Kaneko K., Ohtani K., Tsujikawa Y., Fujii S.: Utilization of the cryogenic exergy of LNG by a mirror gas-turbine. Appl. Energ. 79(2004), 4, 355–369.
[22] Bisio G., Tagliafico L.: On the recovery of LNG physical exergy by means of a simple cycle or a complex system. Exergy, Int. J. 2(2002), 1, 34–50.
[23] Morosuk T. Tsatsaronis G.: Comparative evaluation of LNG–based cogeneration systems using advanced exergetic analysis. Energy 36(2011), 6, 3771–3778.
[24] Morosuk T., Tsatsaronis G., Boyano A., Gantiva C.: Advanced exergy-based analyses applied to a system including LNG regasification and electricity generation. Int. J. Energ. Environ. Eng. 3(2012), 1.
[25] Salimpour M.R., Zahedi M.A.: Proposing a novel combined cycle for optimal exergy recovery of liquefied natural gas. Heat Mass Transfer 48(2012), 8, 1309–1317.
[26] Angelino G., Invernizzi C.M.: The role of real gas Brayton cycles for the use of liquid natural gas physical exergy. Appl. Therm. Eng. 31(2011), 5, 827–833.
[27] Açıkkalp E., Aras HA., Hepbaslic A.: Advanced exergy analysis of a trigeneration system with a diesel–gas engine operating in a refrigerator plant building. Energ. Buildings 80(2014), 268–275.
[28] Cheng D.Y., Nelson A.L.C.: The chronological development of the Cheng cycle steam injected gas turbine during the past 25 years. In: Proc. ASME Turbo Expo 2002: Power for Land, Sea, and Air, Amsterdam, June 3–6, 2002, GT 2002; 421–428.
[29] Szargut J.: Technical Thermodynamics. Wydawn. Politechniki Slaskiej, Gliwice 2011 (in Polish).

[1] Plis M.: Mathematical modeling of an axial compressor in a gas turbine system. J. Power Technol. 96(2016), 3, 194–199.
[2] Badyda K., Miller A.: Power Gas Turbines and Systems with Their Application. Kaprint, Lublin 2014 (in Polish).
[3] Kehlhofer R., Rukes B., Hennemann F., Stirnimann F.: Combined-Cycle Gas and Steam Turbine Power Plants. PennWell, Tusla 2009.
[4] Boyce M.P.: Gas Turbine Engineering Handbook. Butterworth-Heinemann, Houston 2011.
[5] Kotowicz J.: The current state and prospects of development of gas-steam systems. Arch. Energ. 42(2012), 1 23–28, (in Polish).
[6] Horlock J.H.: Advanced Gas Turbine Cycles. Pergamon, Kidlington 2013.
[7] Tsoutsanis E., Li Y. G., Pilidis P., Newby M.: Part-load performance of gas turbines: Part I: – A novel compr/essor map generation approach suitable for adaptive simulation. In: Proc. ASME Gas Turbine India Conf., Mumbai, 1 Dec. 2012, GTINDIA2012-9580, 733–742.
[8] Tsoutsanis E., Meskin N., Benammar M., Khashayar K.: A component map tuning method for performance prediction and diagnostics of gas turbine compressors. Appl. Energ. 135(2014), 572–585.
[9] Giampaolo A.J.: Gas Turbine Handbook: Principles and Practices. Fairmont CRC / Taylor&Francis, Lilburn Boca Raton 2006.
[10] Eckert B.: Axial and Radial Compressors. PWT, Warszawa 1959 (in Polish).
[11] Saravanamuttoo H.I.H.: Gas Turbine Theory. Pearson/Prentice Hall, Harlow 2009.
[12] Kalman D.: The most marvelous theorem in mathematics. J. Online Math. Appl. 8(2008).
[13] Halir R., Flusser J.: Numerically stable direct least squares fitting of ellipses. In: Proc. 6th Int. Conf. Central Europe on Computer Graphics and Visualization, Plzen, 1998, 125–132
[14] https://www.solver.com/excel-solver-grg-nonlinear-solving-method-stopping-conditions (accessed 27 May 2021).
[15] Perycz S.: Steam and Gas Turbines. Ossolineum, Wydawn. IMP PAN, Wrocław 1992 (in Polish).
[16] Trawinski P.: Development of real gas model operating in gas turbine system in Python programming environment. Arch. Thermodyn. 41(2020), 4, 23–61.

[1] Jiang Z., Huang X., Chang M., Li C., Ge Y.: Thermal error prediction and reliability sensitivity analysis of motorized spindle based on Kriging model. Eng. Fail. Anal. 127(2021), 105558.
[2] Mullor R., Mulero J., Trottini M.: A modelling approach to optimal imperfect maintenance of repairable equipment with multiple failure modes. Comput. Ind. Eng. 128(2019), 24–31.
[3] Maa Z., Rena Y., Xianga X., Turk Z.: Data-driven decision-making for equipment maintenance. Automat. Constr. 112(2020), 103103.
[4] Milovanovic Z.N., Papic LR, Milovanovic S.Z., Milovanovic V.Z., Dumonjic- Milovanovic S.R., Brankovic D.L.: Methods of risk modeling in a thermal power plant. In the Handbook of Reliability. In: Maintenance, and System Safety through Mathematical Modeling, Academic Press, 2021, 315–372.
[5] Gao W.: Comparison study on nature-inspired optimization algorithms for optimization back analysis of underground engineering. Eng. Comput. 37(2020), 3, 1895– 1919.
[6] Palakodeti S.R., Raju P.K., Guo H.: A dynamic process for evaluating the reliability of fossil power plant assets. Eng. Rep. 2(2020),12, e12277.
[7] Yuyama A., Kajitani Y., Shoji G.: Simulation of operational reliability of thermal power plants during a power crisis: Are we underestimating power shortage risk? Appl. Energ. 231(2018), 901–913.
[8] Jagtap H.P., Bewoor A.K., Kumar R., Ahmadi M.H., Assad M.E., Sharifpur M.: RAM analysis and availability optimization of thermal power plant water circulation system using PSO. Energ. Rep. 7(2021), 1133–1153.
[9] Ahmadizadeh P., Mashadi B., Lodaya D.: Energy management of a dual-mode power split powertrain based on the Pontryagin’s minimum principle. IET Intell. Transp. Syst. 11(2017), 9, 561–571.
[10] Melchor-Hernández C.L., Rivas-Dávalos F., Maximov S., Coria V.H., Guardado J.L.: A model for optimizing maintenance policy for power equipment. Elect. Power Energ. Syst. 68(2015), 304–312.
[11] Abunima H., Teh J., Lai C.M., Jabir H.J.: A systematic review of reliability studies on composite power systems: a coherent taxonomy motivations, open challenges, recommendations, and new research directions. Energies 11(2018), 9, 2417.
[12] Ellis M., Bojdo N., Filippone A., Clarkson R.: Monte Carlo Predictions of Aero-Engine Performance Degradation Due to Particle Ingestion. Aerospace 8(2021), 6, 146.
[13] Ivanitckii M.S., Sultanov M.M., Trukhanov V.M.: Analysis of the influence of operating modes of heat generating plants on the energy and environmental safety of thermal power plants. In: Proc. 2nd 2020 Int. Youth Conf. on Radio Electronics, Electrical and Power Engineering, REEPE 2020, Moscow, March 12–14, 2020, 9059205.
[14] Arakelyan E.K., Boldyrev I.A., Gorban Y.A.: TPP generating unit technical and economic index accuracy increase. In: Proc. 2nd 2020 Int. Youth Conf. on Radio Electronics, Electrical and Power Engineering, REEPE 2020, Moscow, March 12–14, 2020, C. 9059234.
[15] McIntyre K.B.: A review of the common causes of boiler failure in the sugar industry. In: Proc. S. Afr. Sug. Technol. Ass. 76(2002), 355–364.
[16] Shopeju O.O., Oyedepo S.O.: A comprehensive review of thermal power plants reliability using stochastic methods. IOP Conf. Ser.-Mat. Sci. Eng. 1107(2021), 1, 012161.
[17] Menni Y., Chamkha A.J., Zidani C., Benyoucef B.: Analysis of thermohydraulic performance of a solar air heater tube with modern obstacles. Arch. Thermodyn. 41(2020), 3, 78–83.
[18] Loutzenhiser P.G., Manz H., Felsmann C., Strachan P.A., Frank T., Maxwell G.M.: Empirical validation of models to compute solar irradiance on inclined surfaces for building energy simulation. Sol. Energy 81(2007), 2, 254–67.
[19] Broday E.E., Ruivo C.R., da Silva M.G.: The use of Monte Carlo method to assess the uncertainty of thermal comfort indices PMV and PPD: Benefits of using a measuring set with an operative temperature probe. J. Build. Eng. 35(2021), 1, 101961.

[1] Zhang J., Zhang H.-H., He Y.-L., Tao W.-Q.: A comprehensive review on advances and applications of industrial heat pumps based on the practices in China. Appl. Energ. 178(2016), 800–825.
[2] Chwieduk D.: Analysis of utilization of renewable energies as heat sources for heat pumps in building sector. Renew. Energ. 9(1996), 720–723.
[3] Khrustaliov B.M.: Heat Supply and Ventilation. ASV, Moscow 2007 (in Russian).
[4] Mazzeo D.: Solar and wind assisted heat pump to meet the building air conditioning and electric energy demand in the presence of an electric vehicle charging station and battery storage. J. Clean. Prod. 213(2019), 1228–1250.
[5] Chwieduk B., Chwieduk D.: Analysis of operation and energy performance of a heat pump driven by a PV system for space heating of a single family house in Polish conditions. Renew. Energ. 165(2021), 117–126.
[6] Bezrodny M., Prytula N., Tsvietkova M.: Efficiency of heat pump systems of air conditioningfor removing excessive moisture. Arch. Thermodyn. 40(2019), 2, 151–165.
[7] Bezrodny E.K., Misiura T.O.: The heat pump system for ventilation and air conditioning inside the production area with an excessive internal moisture generation. Eurasian Phys. Tech. J. 17(2020), 118–132.
[8] Adamkiewicz A., Nikonczuk P.: Waste heat recovery from the air preparation room in a paint shop. Arch. Thermodyn. 40(2019), 3, 229–241.
[9] Szreder M.: Investigations into the influence of functional parameters of a heat pump on its thermal efficiency. Teka. Commission of Motorization and Energetics in Agriculture 13(2013), 191–196.
[10] Redko A., Redko O., DiPippo R.: Low-Temperature Energy Systems with Applications of Renewable Energy. Academic Press, Elsevier, 2020.
[11] Morozjuk T.V.: The Theory of Chillers and Heat Pumps. Studija “Negociant”, Odessa 2006 (in Russian).
[12] Jaber S., Ezzat A.W.: Investigation of energy recovery with exhaust air evaporative cooling in ventilation system. Energ. Buildings 139(2017), 439–448.
[13] Bozhenko M.F.: Heat Sources and Heat Consumers. NTUU KPI “Politehnika”, Kyiv 2004 (in Ukrainian).
[14] State Building Standards of Ukraine DBN B.2.5-67: 2013, “Heating, ventilation and air conditioning”. Ministry of Regional Development, Construction and Housing of Ukraine, Kyiv 2013 (in Ukrainian).

[1] Morandini M., Xisto C., Pascoa J., Quaranta G., Gagnon L., Masarati P.: Aeroelastic analysis of a cycloidal rotor under various operating conditions. J. Aircraft. 55(2018), 4, 1675–1688.
[2] Muscarello V., Masarati P., Quaranta G., Georges T., Gomand J., Malburet F., Marilena P.: Instability mechanism of roll/lateral biodynamic rotorcraft–pilot couplings. J. Am. Helicopter Soc. 63(2018), 1–13.
[3] Xisto C. Leger J., Pascoa J., Gagnon L., Masarati P., Angeli D., Dumas A.: Parametric analysis of a large-scale cycloidal rotor in hovering conditions. J. Aerospace Eng. 30(2017), 1.
[4] Xisto C., Pascoa J., Abdollahzadeh M., Leger J., Masarati P., Gagnon L., Schwaiger M., Wills D.: PECyT – plasma enhanced cycloidal thruster. In: Proc. 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. July 28–30, 2014, Cleveland.
[5] Andrisani A., Angeli D., Dumas A.: Optimal pitching schedules for a cycloidal rotor in hovering. Aircr. Eng. Aerosp. Tec. 88(2016), 5.
[6] Xisto C., Pascoa J., Leger J.: Cycloidal rotor propulsion system with plasma enhanced aerodynamics. In: Proc. ASME 2014 Int.l Mechanical Engineering Congress and Exposition; Montreal, Nov. 14–20, 2014; V001T01A005.
[7] Xisto C., Pascoa J., Trancossi M.: Geometrical parameters influencing the aerodynamic efficiency of a small-scale self-pitch high solidity VAWT. J. Sol. Energy Eng. 138(2016), 031006.
[8] Benedict M.: Fundamental understanding of cycloidal-rotor concept for micro air vehicle applications. PhD thesis, Univ. Maryland, College Park, 2010.
[9] Benedict M., Ramasamy M., Chopra I.: Improving the aerodynamic performance of micro-air-vehicle-scale cycloidal rotor: An experimental approach. J. Aircraft 47(20104), 1117–1125.
[10] Heimerl J., Halder A., Benedict M.: Experimental and computational investigation of a UAV-scale cycloidal rotor in forward flight. In: Proc. The Vertical Flight Society’s 77th Ann. Vertical Flight Society Forum and Technology Display, The Future of Vertical Flight, Virtual, May 10–14, 2021.
[11] Halder A., Benedict M.: Nonlinear aeroelastic coupled trim analysis of a twin cyclocopter in forward flight. AIAA J., 59, 2021, 305–319.
[12] Lee B., Saj V., Benedict M., Kalathil D.: A Vision-Based Control Method for Autonomous Landing Of Vertical Flight Aircraft On A Moving Platform Without Using GPS. In: Proc. The Vertical Flight Society’s, 76th Ann. Forum and Technology Display, Virtual, Oct. 5–8, 2020.
[13] Denton H., Benedict M., Kang H., Hrishikeshavan V.: Design, development and flight testing of a gun-launched rotary-wing micro air vehicle. In: Proc. The Vertical Flight Society’s, 76th Ann. Forum and Technology Display, Virtual, Oct. 5–8, 2020.
[14] Halder A., Benedict M.: Understanding upward scalability of cycloidal rotors for large-scale UAS applications. In: Proc. Aeromechanics for Advanced Vertical Flight Technical Meeting 2020, Transformative Vertical Flight 2020, San Jose, 21–23 Jan. 2020, 311–330.
[15] Runco C., Benedict M.: Flight dynamics model identification of a meso-scale twin-cyclocopter in hover. Paper presented at the 77th Ann. Vertical Flight Society Forum and Technology Display, The Future of Vertical Flight, Virtual, May 10-14, 2021.
[16] Runco C., Coleman D., Benedict M.: Design and development of a 30 g cyclocopter. J. Am. Helicopter Soc. 64(2019), 1.
[17] Coleman D., Halder A., Saemi F., Runco C., Denton H., Lee B., Benedict M.: Development of “Aria”, a compact, ultra-quiet personal electric helicopter. In: Proc. 77th Annual Vertical Flight Society Forum and Technology Display, FORUM 2021: The Future of Vertical Flight, Virtual, May 10–14, 2021.
[18] Koschorrek P., Siebert Ch., Haghani A., Jeinsch T.: Dynamic positioning with active roll reduction using Voith Schneider propeller. IFAC-PapersOnLine, 48(2015), 16, 178–183.
[19] Schubert A., Koschorrek P., Kurowski M., Lampe B., Jeinsch T.: Roll damping using Voith Schneider propeller a repetitive control approach. IFACPapersOnLine 49(2016), 23, 557–561.
[20] Hahn T., Koschorrek P., Jeinsch T.: Parameter estimation of wave-induced oscillatory ship motion for wave filtering in dynamic positioning. IFAC-PapersOnLine 51(2018), 29, 183–188.
[21] Hashem I., Mohamed M.H.: Aerodynamic performance enhancements of H-rotor Darrieus wind turbine. Energy 142(2018), 531–545
[22] Siegel S.: Numerical benchmarking study of a cycloidal wave energy converter. Renew. Energ. 134(2019), 390–405.
[23] Siegel S.: Wave radiation of a cycloidal wave energy converter. Appl. Ocean Res. 49(2015), 9–19.
[24] Bianchini A., Balduzzi F., Rainbird J., Peiro J., Graham M., Ferrara G.: An experimental and numerical assessment of airfoil polars for use in Darrieus wind turbines – Part I: Flow curvature effects. J. Eng. Gas Turb. Power 138(2016), 032602-1.
[25] Dykas S., Majkut M., Smołka K., Strozik M., Chmielniak T., Stasko T.: Numerical and experimental investigation of the fan with cycloidal rotor. Mech. Mechanical Eng. 22(2018), 2, 447–454.
[26] Stasko T., Dykas S., Majkut M., Smołka K.: An attempt to evaluate the cycloidal rotor fan performance, Open J. Fluid Dyn. 9(2019), 292–30.
[27] Shyy W., Lian Y., Tang J., Viieru D., Liu H.: Aerodynamics of Low Reynolds Flyers. Cambridge Univ. Press, 2008.
[28] Ansys Fluent User Guide 2020 R1. Ansys, Canonsburg 2020.
[29] Shrestha E., Yeo D., Benedict M., Chopra I.: Development of a meso-scale cycloidal-rotor aircraft for micro air vehicle application. Int. J. Micro Air Veh. 9(2017), 3.
[30] Augusto J., Monteiro L., Pascoa J., Xisto C.: Aerodynamic optimization of cyclorotors. Aircraft Eng. Aerosp. Tec. 88(2016), 2.

[1] German Federal Ministry for Economic Affairs and Energy: The Energy of the Future, 2021; 8th Monitoring Report on the Energy Transition – Reporting years 2018 and 2019 (in German). https://www.bmwi.de/Redaktion/DE/Publikationen/ Energie/achter-monitoring-bericht-energie-der-zukunft.html (accessed 9 May 2021).
[2] Staudacher T., von Roon S., Vogler G.: Energy storage – status, perspectives and economic viability; study summary report. Forschungsstelle für Energiewirtschaft e.V., 03.2009 (in German).
[3] Badyda K., Milewski J: Thermodynamic analysis of compressed air energy storage working conditions. Arch. Energ. XLII(2012), 1. 53–68.
[4] Bürkle D., Zunft S: Start of ADELE-ING – Development of the Adiabatic Compressed Air Storage System Reaches the Next Phase. RWE Power, 2013 (in German).
[5] Cerbe G., Wilhelms G: Technical Thermodynamics – Theoretical Fundamentals and Practical Applications (17th Edn.). Carl Hanser Verlag, München 2013 (in German).
[6] Küttner K.-H., Eifler W: Piston Machines (with 40 tables and numerous exercises and examples with solutions) (7th Edn.). Vieweg + Teubner, Wiesbaden 2008 (in German).
[7] Bauer Kompressoren: Operating instructions PE 100-T 2010 (in German).
[8] DIN EN 60034-30-1 VDE 0530-30-1:2014-12: Rotating Electrical Machines / Part 30-1: Efficiency classification of mains-fed three-phase motors (IE-Code), 2014 (in German).
[9] Biedermann F., Gruber A: Guide for the Selection of Energy Efficient Belts. Haberkorn, Leitfaden der Forschungsgesellschaft für Energiewirtschaft, 2014 (in German).
[10] Murrenhoff H: Fundamentals of Fluid Power – Part 2: Pneumatics (2nd Edn.). Shaker Verlag, Aachen 2014 (in German).
[11] Energy Logger Voltcraft. https://www.conrad.de/de/p/voltcraft-energy-logger-4000-energiekosten-messgeraet-stromtarif-einstellbar-kostenprognose-125444.html (accessed 9 May 2021) (in German).
[12] Drucksensor autosen: https://autosen.com/de/Prozesssensoren/Drucksensoren/Elektronischer-Drucksensor-G1-4A-AP020 (accessed 9 May 2021) (in German).
[13] Strak J: Technologies of Waste Heat Utilization (2nd Edn.). In: Geschäftsfeld Energie und Thermisches Management (J. Meinert, Ed.). SAENA, IFAM, Dresden 2016 (in German).
[14] Siemens Aktiengesellschaft. Munich 2021 (in German). https://www.plm.automation.siemens.com/global/de/products/simcenter/simcenter-system-simulation.html (accessed 9 May 2021).
[15] Engineering Simulations and 3D Design Software. https://www.Ansys.com (accessed 9 May 2021).
[16] Wittel H., Muhs D., Jannasch D., Voßiek J: Roloff/Matek: Machine Elements (21st Edn.). Springer Vieweg, Wiesbaden 2013 (in German).
[17] Wittel H., Muhs D., Jannasch D., Voßiek J: Roloff/Matek: Machine Elements – Table Book (21st Edn.). Springer Vieweg, Wiesbaden 2013 (in German).

[1] Dykas S., Wróblewski W., Rulik S., Chmielniak T.: Numerical method for modelling of acoustic waves propagation. Arch. Acoust. 35(2010), 1, 35–48.
[2] Fortuna S., Sobczak K.: Numerical and experimental investigations of the flow in radial fan. Mechanics 27(2008), 4, 138–143
[3] Moon Y.J., Cho Y., Nam H.S.: Computation of unsteady viscous flow and aeroacoustic noise of the cross flow fan. Comput. Fluids 32(2003), 7, 995–1015.
[4] Rulik S., Dykas S., Wroblewski W.: Modelling of aerodynamic noise using hybrid SAS and DES methods. In: Proc. ASME Turbo Expo 2010: Power for Land, Sea and Air, Glasgow, June 14–18, 2010, 7(2010), 2835–2844., GT2010-2269.
[5] Stasko T., Dykas S., Majkut M., Smolka K.: An attempt to evaluate the cycloidal rotor fan performance. Open J. Fluid Dynam. 9(2019), 4.
[6] Benedek T., Vad J.: Beamforming based extension of semi-empirical noise modelling for low-speed axial flow fans. Appl. Acoust. 178(2021), 108018.
[7] Jiang H., Wang Q., Zheng T.F., Tu C.X., Zhang K.: PIV measurement of internal flow field in a range hood. In: Energy and Mechanical Engineering (S.Y. Liang, Ed.), 2015 Int. Conf. on Energy and Mechanical Engineering, Wuhan, 17-18 Oct. 2015, World Scientific, 2016, 570–575.
[8] Probst M., Pritz B.: Quantitative validation of CFD-simulation against PIV data for a centrifugal fan. In: Proc. 14th Int. Symp. on Experimental Computational Aerothermodynamics of Internal Flows, Gdansk 8-11 July 2019.
[9] Neise W., Michel U.: Aerodynamic Noise of Turbomachines. DLR-Interner Bericht, Berlin 1994.
[10] Jeon W.H., Lee D.J., Rhee H.: An application of the acoustic similarity law to the numerical analysis of centrifugal fan noise. JSME Int. J. C-mech Sy. 47(2004), 3, 845–851.
[11] Kissner C., Guerin S.: Comparison of predicted fan broadband noise using a twoversus a three-dimensional synthetic turbulence method. J. Sound Vib. 508(2021), 116221.
[12] Jaron R., Herthum H., Franke M., Moreau A., Guerin S.: Impact of turbulence models on RANS-informed prediction of fan broadband interaction noise. In: Proc. 12th Eur. Turbomachinery Conference (ETC), Stockholm, 3-7 April, 2017.
[13] Carolus T.: Theoretische und experimentelle Untersuchung des Pumpens von lufttechnischen Anlagen mit Radialventilatoren. PhD thesis, Karlsruhe University of Applied Sciences, Karlsruhe 1984.
[14] Blazquez-Navarro R., Corral R.: Prediction of fan acoustic blockage on fan/outlet guide vane broadband interaction noise using frequency domain linearized Navier–Stokes solvers. J. Sound Vib. 508(2021), 116033.
[15] Ffowcs-Williams J.E., Hawkings D.L.: Sound generation by turbulence and surfaces in arbitrary motion. Philos. T.R. Soc. Lond. S-A, 264(1969), 1151, 321–342.
[16] Lighthill M.J.: On sound generated aerodynamically. I. General theory. Proc. R. Soc. Lon. Ser.-A 211(1952) 1107, 564–587
[17] Menter F.R., Egorov Y.: A scale-adaptive simulation model using two-equation models. In: Proc. 43th AIAA Aerospace Sciences Meeting and Exhibit, Reno, 10-13 Jan. 2005, AIAA 2005-1095.
[18] Ansys Fluent Theory Guide, 2021R1. https://www.ansys.com (acessed 1 July 12021).

[1] Elbel S., Hrnjak P.: Experimental validation of a prototype ejector designed to reduce throttling losses encountered in transcritical R744 system operation. Int. J. Refrig. 31(2008), 3, 411–422.
[2] Liu J.P., Chen J.P., Chen Z.J.: Thermodynamic analysis on transcritical R744 vapor compression/ejection hybrid refrigeration cycle. In: Prelim. Proc. 5th IIR Gustav Lorentzen Conf. on Natural Working Fluids, Guangzhou 2002, 184–188.
[3] Jeong J., Saito K., Kawai S., Yoshikawa C., Hattori K.: Efficiency enhancement of vapor compression refrigerator using natural working fluids with two-phase flow ejector. In: Proc. 6th IIR-Gustav Lorentzen Conf. on Natural Working Fluids at Glasgow 2004, CD-ROM.
[4] Jian-qiang Deng, Pei-xue Jiang, Tao Lu, Wei Lu: Particular characteristics of transcritical CO2 refrigeration cycle with an ejector. Appl. Therm. Eng. 27(2007), 381–388.
[5] Da Qing Li, Groll E.A.: Transcritical CO2 refrigeration cycle with ejectorexpansion device. Int. J. Refrig. 28(2005), 5, 766–773.
[6] Ksayer E.B., Clodic D.: Enhancement of CO2 refrigeration cycle using an ejector: 1D analysis. In: Proc. Int. Refrigeration and Air Conditioning Conf., Purdue 2026, Purdue Univ. R058.2006.
[7] Bartosiewicz Y., Aidoun Z., Mercadier Y.: Numerical assessment of ejector operation for refrigeration applications based on CFD. Appl. Therm. Eng. 26(2006), 5-6, 604–612.
[8] Petrenko V.O., Huang B.J., Ierin V.O.: Design-theoretical study of cascade CO2 sub-critical mechanical compression/butane ejector cooling cycle. Int. J. Refrig. 34(2011), 7, 1649–1656.
[9] Martel S.: Étude numérique d’un écoulement diphasique critique dans un convergent- divergent. PhD thesis, Université de Sherbrooke, Sherbrooke 2013 (in French).
[10] Marynowski T.: Étude expérimentale et numérique d’écoulements supersoniques en éjecteur avec et sans condensation. PhD thesis, Université de Sherbrooke, Sherbrooke 2007 (in French).
[11] Scott D., Aidoun Z., Ouzzane M.: An experimental investigation of an ejector for validating numerical simulations. Int. J. Refrig. 34(2011), 7, 1717–1723.
[12] Chen H., Zhu J., Ge J., Lu W., Zheng L.: A cylindrical mixing chamber ejector analysis model to predict the optimal nozzle exit position. Energy 208(2020), 118302.
[13] Mondal S., De D.: Performance assessment of a low-grade heat driven dual ejector vapor compression refrigeration cycle. Appl. Therm. Eng. 179(2020), 115782.
[14] Ringstad K.E., Allouche Y., Gullo P., Banasiak K., Hafner A.: A detailed review on CO2 two-phase ejector flow modeling. Thermal Sci. Eng. Progress 20(2020), 100647.
[15] Yu B., Yang J., Wang D., Shi J., Chen J.: An updated review of recent advances on modified technologies in transcritical CO2 refrigeration cycle. Energy 189(2019), 116147.
[16] Chen W., Liu M., Chong D., Yan J., Little A.B., Bartosiewicz Y.A.: 1D model to predict ejector performance at critical and sub-critical operational regimes. Int. J. Refrig. 36(2013), 6, 1750–1761.
[17] Banasiak K., Hafner A., Andresen T.: Experimental and numerical investigation of the influence of the two-phase ejector geometry on the performance of the R744 heat pump. Int. J. Refrig. 35(2012), 6, 1617–1625.
[18] Domanski P.A.: Theoretical Evaluation of the Vapor Compression Cycle With a Liquid-Line/Suction-Line Heat Exchanger, Economizer, and Ejector. National Institute of Standards and Technology, NISTIR-5606, 1995.
[19] Elbel S.W., Hrnjak P.S.: Effect of internal heat exchanger on performance of transcritical CO2 systems with ejector. In: Proc. 10th Int. Refrigeration and Air Conditioning Conf. Purdue 2004, R166, West Lafayette 2004.
[20] Kornhauser A.A.: The use of an ejector as a refrigerant expander. In: Proc. USNC/IIR-Purdue Refrigeration Conf., Purdue Univ.,West Lafayette 1990, 10–19.
[21] Lawrence N., Elbel S.: Experimental and analytical investigation of automotive ejector air-conditioning cycles using low-pressure refrigerants. In: Proc. Int. Refrigeration and Air Conditioning Conf., Purdue, July 16-19, 2012, 1169, 1–10.
[22] Liu F., Li Y., Groll E.A.: Performance enhancement of CO2 air conditioner with a controllable ejector. Int. J. Refrig. 35(2012), 6, 1604–1616.
[23] Domanski P.A.: Minimizing throttling losses in the refrigeration cycle. In: Proc. 19th Int. Congress of Refrigeration, Hague 1995, 766–773.
[24] Varga S., Oliveira A., Diaconu B.: Influence of geometrical factors on steam ejector performance – A numerical assessment. Int. J. Refrig. 32(2009), 7, 1694– 1701.
[25] Sarkar J.: Optimization of ejector-expansion transcritical CO2 heat pump cycle. Energy 33(2008), 9, 1399–1406.
[26] Elbel S.: Historical and present developments of ejector refrigeration systems with emphasis on transcritical carbon dioxide air-conditioning applications. Int. J. Refrig. 34(2011), 7, 1545–1561.
[27] Lee J.S., Kim M.S., Kim M.S.: Experimental study on the improvement of CO2 air conditioning system performance using an ejector. Int. J. Refrig. 34(2011), 7, 1614–1625.
[28] Lucas C., Koehler J.: Experimental investigation of the COP improvement of a refrigeration cycle by use of an ejector. Int. J. Refrig. 35(2012), 6, 1595–1603.
[29] Nakagawa M., Marasigan A.R., Matsukawa T., Kurashina A.: Experimental investigation on the effect of mixing length on the performance of two-phase ejector for CO2 refrigerationcycle with and without heat exchanger. Int. J. Refrig. 34(2011), 7, 1604–1613.
[30] Nakagawa M., Marasigan A.R., Matsukawa T.: Experimental analysis on the effect of internal heat exchanger in transcritical CO2 refrigeration cycle with twophase ejector. Int. J. Refrig. 34(2011), 7, 1577–1586.
[31] Nakagawa M., Marasigan A.R., Matsukawa T.: Experimental analysis of two phase ejector system with varying mixing cross-sectional area using natural refrigerant CO2. Int. J. Air-Cond. Refrig. 18(2010), 4, 297–307.
[32] Liu F., Groll E.A., Li D.: Investigation on performance of variable geometry ejectors for CO2 refrigeration cycles. Energy 45(2012), 1, 829–839.
[33] Liu F., Groll E.A.: Analysis of a two-phase flow ejector for transcritical CO2 cycle. Int. Refrig. Air Cond. Conf., Purdue, July 14–17, 2008, 924.
[34] Liu F., Groll E.A.: Study of ejector efficiencies in refrigeration cycles. Appl. Therm. Eng. 52(2013), 2, 360–370.
[35] Lawrence N., Elbel S.: Experimental investigation on the effect of evaporator design and application of work recovery on the performance of two-phase ejector liquid recirculation cycles with R410A. Appl. Therm. Eng. 100(2016), 398–411.
[36] Van Nguyen V., Varga S., Soares J., Dvorak V., Oliveira A.C.: Applying a variable geometry ejector in a solar ejector refrigeration system. Int. J. Refrig. 113(2020), 187–195.
[37] Pereira P.R., Varga S., Soares J., Oliveira A.C., Lopes A.M., de Almeida F.G., Carneiro J.F.: Experimental results with a variable geometry ejector using R600a as working fluid. Int. J. Refrig. 46(2014), 77–85.
[38] Liu F., Groll E.: A preliminary study of the performance enhancement of a dualmode heat pump using an ejector. In: Proc. 25th IIR Int. Cong. of Refrigeration, ICR2015, Yokohama, Aug. 16-22, 2015, 16–22.
[39] Eames I.W., Wu S., Worall M., Aphornratana S.: An experimental investigation of steam ejectors for application in jet-pump refrigerators powered by low-grade heat. P. I. Mech. Eng. A-J Pow. A 213(1999), 5, 351–361. [40] Lee J.S., Kim M. Se, Kim M. Soo: Experimental study on the improvement of CO2 air conditioning system performance using an ejector. Int. J. Refrig. 34(2011), 7, 1614–1625.
[41] Bouzrara A.: Etude expérimentale des éjecteurs- application à la récupération de l’énergie de détente des machines frigorifiques au CO2. PhD thesis, INSA Lyon (CETHIL)-ENI Tunis 2018 (in French).

[1] Akwa J.V., Vielmo H.A., Petry A.P.: A review on the performance of Savonius wind turbines. Renew. Sust. Energ. Rev. 16(2012), 5, 3054–3064.
[2] Masdari M., Tahani M., Naderi M.H., Babayan N.: Optimization of airfoil Based Savonius wind turbine using coupled discrete vortex method and salp swarm algorithm. J. Clean. Prod. 222(2019), 47–56.
[3] Alom N., Saha U.K..: Influence of blade profiles on Savonius rotor performance: Numerical simulation and experimental validation. Energ. Convers. Manage. 186(2019), 267–277.
[4] Zemamou M., Aggour M., Toumi A.: Review of savonius wind turbine design and performance. Energy Proced. 141(2017), 383–388.
[5] Tartuferi M., D’Alessandro V., Montelpare S., Ricci R.: Enhancement of savonius wind rotor aerodynamic performance: A computational study of new blade shapes and curtain systems. Energy 79(2015), 371–384.
[6] Mauro S., Brusca S., Lanzafame R., Messina M.: CFD modeling of a ducted Savonius wind turbine for the evaluation of the blockage effects on rotor performance. Renew. Energ. 141(2019), 28–39.
[7] Sobczak K., Obidowski D., Reorowicz P., Marchewka E.: Numerical investigations of the savonius turbine with deformable blades. Energies 13(2020), 14, 3717.
[8] Obidowski D., Sobczak K., Jozwik K., Reorowicz P.: Vertical Axis Wind Turbine with a Variable Geometry of Blades. European Patent Application 19199085.2, 24 Sept. 2019.
[9] Kamoji M.A., Kedare S.B., Prabhu S.V..: Experimental investigations on single stage modified Savonius rotor. Appl. Energ. 86(2009), 7-8, 1064–1073.
[10] Lipian M., Czapski P., Obidowski D.: Fluid-structure interaction numerical analysis of a small, urban wind turbine blade. Energies 13(2020), 7, 1–15.
[11] Marzec Ł., Bulinski Z., Krysinski T.: Fluid structure interaction analysis of the operating Savonius wind turbine. Renew. Energ. 164(2021), 272–284.
[12] Chan C.M., Bai H.L., He D.Q.: Blade shape optimization of the Savonius wind turbine using a genetic algorithm. Appl. Energ. 213(2018), 148–157.
[13] Saeed H.A.H., Elmekawy A.M.N., Kassab S.Z.: Numerical study of improving Savonius turbine power coefficient by various blade shapes. Alexandria Eng. J. 58(2019), 2, 429–441.
[14] Mohamed M.H., Janiga G., Pap E., Thcvenin D.: Optimization of Savonius turbines using an obstacle shielding the returning blade. Renew. Energ. 35(2010), 11, 2618–2626.
[15] Kacprzak K., Liskiewicz G., Sobczak K.: Numerical investigation of conventional and modified Savonius wind turbines. Renew. Energ. 60(2013), 578–585.
[16] ANSYS Inc.: ANSYS Fluent 20.2 User’s Guide. ANSYS Inc., Canonsburg, 2020.
[17] ANSYS Inc.: https://www.ansys.com/. ANSYS Inc., Canonsburg, 2020.
[18] Menter F.R., Langtry R., Völker S, Huang P.G.: Transition modelling for general purpose CFD codes. In: Proc. ERCOFTAC Int. Symp. on Engineering Turbulence Modelling and Measurements 6; ETMM6, Sardinia, 23-25 May 2005, 31–48.
[19] Kerikous E., Thévenin D.: Optimal shape of thick blades for a hydraulic Savonius turbine. Renew. Energ. 134(2019), 629–638.