Search results

Filters

  • Journals
  • Authors
  • Contributor
  • Keywords
  • Date
  • Type

Search results

Number of results: 8371
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

The Pb(II)-resistant bacterium was isolated from heavy metal-contained soils and used as a biosorbentto remove Pb(II). The strain was identified as Enterobacter sp. based on the 16S rRNA sequence analysis. Theeffect of biosorption properties (pH value, Pb(II) concentration, bacterial concentration and temperature) onPb(II) was investigated by batch experiments. Results of FTIR and XPS showed that the biosorption process mainly involved some oxygen-containing groups (-OH and -COOH groups). The experimental results and equilibrium data were fitted by pseudo-second-order kinetic model and Langmuir model, respectively. The experimental biosorption isotherms fitted the Langmuir model, and the maximum biosorption capacity was 40.75 mg/g at 298 K. The calculated ΔGо and ΔHо were –4.06 and 14.91(kJ/mol), respectively, which indicated that biosorption process was spontaneous and endothermic. Results show that Enterobacter sp. will be an efficient biosorbent for Pb(II) removal.
Go to article

Bibliography

  1. Abdi, O. & Kazemi, M. (2015). A review study of biosorption of heavy metals and comparison between different biosorbents. Journal of Materials and Environmental Science, 6, pp. 1386-1399.
  2. Ahalya, N., Ramachandra, T.V. & Kanamadi, R.D. (2003). Biosorption of heavy metals. Research Journal of Chemistry and Environment, 7, pp. 235-250.
  3. Baruah, R., Kalita, D.J., Saikia, B.K., Gautam, A., Singh, A.K. & Deka Boruah, H.P. (2016). Native hydrocarbonoclastic bacteria and hydrocarbon mineralization processes. International Biodeterioration & Biodegradation, 112, pp. 18-30. DOI: 10.1016/j.ibiod.2016.04.032
  4. Baysal, Z., Cinar, E., Bulut, Y., Alkan, H. & Dogru, M. (2009). Equlibrium and thermodynamic studies on biosorption of Pb(II) onto Candida albicans biomass. Journal of Hazardous Materials, 161, pp. 62-67. DOI: 10.1016/j.jhazmat.2008.02.122
  5. Bobik, M., Korus, I. & Dudek, L. (2017). The effect of magnetite nanoparticles synthesis conditions on their ability to separate heavy metal ions, Archives of Environmental Protection,43, pp. 3-9. DOI: 10.1515/aep-2017-0017
  6. Boyanov, M. I., Kelly, S. D., Kemner, K M., Bunker, B. A., Fein, J. B. & Fowle, D. (2003). Adsorption of cadium to Bacillus subtilis bacterial cell walls: A pH-dependent X-ray absorption fine structure spectroscopy study. Geochimica Cosmochimica Acta, 67, pp. 3299-3311. DOI: 10.1016/S0016-7037(02)01343-1
  7. Bulut, Y., Gozubenli, N. & Aydin, H. (2007). Equilibrium and kinetics studies for adsorption of direct blue 71 from aqueous solution by wheat shells. Journal of Hazardous Materials, 144, pp. 300-306. DOI: 10.1016/j.jhazmat.2006.10.027
  8. Chen, C., Hu, J. & Wang, J. L. (2020). Biosorption of uranium by immobilized Saccharomyces cerevisiae. Journal of Environmental Radioactivity, 213, pp. 106-158. DOI: 10.1016/j.jenvrad.2020.106158
  9. Chen, Z., Pan, X., Chen, H., Guan, X. & Lin, Z. (2016). Biomineralization of Pb(II) into Pb-hydroxyapatite induced by Bacillus cereus 12-2 isolated from lead-zinc mine tailings. Journal of Hazardous Materials, 301, pp. 531-537. DOI: 10.1016/j.jhazmat.2015.09.023
  10. Chojnacka, K., Chojnacki, A. & Gorecka, H. (2005). Biosorption of Cr(III), Cd(II), and Cu(II) ions by blue-green algae Spiruline sp: Kinetics, equilibrium and the mechanism of the process. Chemosphere, 59, pp. 75-84. DOI: 10.1016/j.chemosphere.2004.10.005
  11. Chojnacka, K., Chojnacki, A. & Gorecka, H. (2004). Trace element removal by Spirulina sp. from copper smelter and refinery effluents. Hydrometallurgy, 73, pp. 147-153.
  12. Chuah, T. G., Jumasiah, A., Azni, I., Katayon, S. & Choong, S. Y. (2005). Rice husk as a potentially low-cost biosorbent for heavy metal and dye removal: an overview. Desalination, 175, pp. 305-316. DOI: 10.1016/j.hydromet.2003.10.003
  13. Çolak, F., Atar, N., Yazıcıoğlu, D. & Olgun, A. (2011). Biosorption of lead from aqueous solutions by bacillus strains possessing heavy-metal resistance. Chemical Engineering Journal, 173, pp. 422-428. DOI: 10.1016/j.cej.2011.07.084
  14. Fourest, E. & Roux, J. C. (1992). Heavy metal biosorption by fungal mycelial by-products: mechanisms and influence of pH. Applied Microbiology Biotechnology, 37, pp. 399-403.
  15. Gupta, V. K., Shrivastava, A. K. & Jain, N. (2001). Biosorption of chromium from aqueous solutions by green algae Spirogyra species. Water Research, 35, pp. 4079-4085. DOI: 10.1016/S0043-1354(01)00138-5
  16. Han, R., Li, H., Li, Y., Zhang, J., Xiao, H. & Shi, J. (2006). Biosorption of copper and lead ions by waste beer yeast. Journal of Hazardous Materials, 137, pp. 1569-1576. DOI: 10.1016/j.jhazmat.2006.04.045
  17. Holan, Z. R., Volesky, B. & Prasetyo, I. (1993). Biosorption of cadmium by biomass of marine algae. Biotechnology and Bioengineering, 41, pp. 819-825.
  18. Kratochvil, D. & Volesky, B. (1998). Advance in the biosorption of heavy metals. Trends Biotechnolgy, 16, pp. 291-300. DOI: 10.1016/S0167-7799(98)01218-9
  19. Ku, Y. & Jung, I. L. (2001). Photocatalytic reduction of Cr(IV) in aqueous solutions by UV irradiation with the presence of titanium dioxide. Water Research, 35, pp. 135-142. DOI: 10.1016/S0043-1354(00)00098-1
  20. Lee, Y. C. & Chang, S. P. (2011). The biosorption of heavy metals from aqueous solution by Spirogyra and Cladophora filamentous macroalgae. Bioresource Technology, 102, pp. 5297-5304. DOI: 10.1016/j.biortech.2010.12.103
  21. Li, D. D., Xu, X. J., Yu, H. W. & Han, X. R. (2017). Characterization of Pb(II) biosorption by psychrotrophic strain Pseudomonas sp. 13 isolated from permafrost soil of Mohe wetland in Northeast China. Journal of Environmental Management, 196, pp. 8-15. DOI: 10.1016/j.jenvman.2017.02.076
  22. Liu, L., Liu, J., Liu, X. T., Dai, C. W., Zhang, Z. X., Song, W. C. & Chu, Y. (2019). Kinetic and equilibrium of U(VI) biosorption onto the resistant bacterium Bacillus amyloliquefaciens. Journal of Environmental Radioactivity, 203, pp. 117-124. DOI: 10.1016/j.jenvrad.2019.03.008
  23. Liu, L., Chen, J. W., Liu, F., Song, W. C. & Sun, Y. B. (2021). Bioaccumulation of uranium by Candida utilis: Investigated by water chemistry and biological effects. Environmental Research, 194, 110691. DOI: 10.1016/j.envres.2020.110691
  24. Liu, L., Zhang, Z. X., Song, W. C. & Chu, Y. N. (2018). Removal of radionuclide U(VI) from aqueous solution by the resistant fungus Absidia corymbifera. Journal of Radioanalytical and Nuclear Chemistry, 318, pp. 1151-1160. DOI: 10.1007/s10967-018-6209-2
  25. Lu, N. Q., Hu, T. J., Zhai, Y. B., Qin, H. Q., Aliyeva, J. & Zhang, H. (2020). Fungal cell with artificial metal container for heavy metals biosorption: Equilibrium, kinetics study and mechanisms analysis. Environmental Research, 182, 109061. DOI: 10.1016/j.envres.2019.109061
  26. Lu, X., Zhou, X. J. & Wang, T. S. (2013). Mechanism of uranium(VI) uptake by saccharomyces cerevisiae under environmentally relevant conditions: Batch, HRTEM, and FTIR studies. Journal of Hazardous Materials, 262, pp. 297-303. DOI: 10.1016/j.jhazmat.2013.08.051
  27. Ma, X. M., Cui, W. G., Yang, L., Yang, Y. Y., Chen, H. F. & Wang, K. (2015). Efficient biosorption of lead(II) and cadmium(II) ions from aqueous solutions by functionalized cell with intracellular CaCO3 mineral scaffolds. Bioresource Technology, 185, pp. 70-78. DOI: 10.1016/j.biortech.2015.02.074
  28. Naik, B. R., Suresh, C., Kumar, N. S. V., Seshaiah, K. & Reddy, A. V. R. (2017). Biosorption of Pb(II) and Ni(II) ions by chemically modified Eclipta alba stem powder: kinetics and equilibrium studies. Separation Science and Technology, 52, pp. 1717-1732. DOI: 10.1080/01496395.2017.1298614
  29. Naik, M. M. & Dubey, S. K. (2013). Lead resistant bacteria: lead resistance mechanisms, their applications in lead bioremediation and biomonitoring. Ecotoxicology and Environment Safety, 98, pp. 1-7. DOI: 10.1016/j.ecoenv.2013.09.039
  30. Naseem, R. & Tahir, S. S. (2011). Removal of Pb(II) from aqueous-acidic solutions by using bentonite as an adsorbent. Water Researce, 35, pp. 3982-3986. DOI: 10.1016/S0043-1354(01)00130-0
  31. Ozdemir, S., Kilinc, E., Poli, A., Nicolaus, B. & Guven, K. (2009). Biosorption of Cd, Cu, Ni, Mn and Zn from aqueous solutions by thermophilic bacteria, Geobacillus toebii sub.sp. Decanicus and Geobacillus thermoleovorans sub. Sp. Stromboliensis: equilibrium, kinetic and thermodynamic studies. Chemical Engineering Journal, 152, pp. 195-206. DOI: 10.1016/j.cej.2009.04.041
  32. Raize, O., Argaman, Y. & Yannai, S. (2004). Mechanisms of biosorption of different heavy metals by brown marine macroalgae. Biotechnology and Bioengineering, 87, pp. 451-458. DOI: 10.1002/bit.20136
  33. Ramrakhiani, L., Ghosh, S. & Majumdar, S. (2016). Surface modification of naturally available biomass for enhancement of heavy metal removal efficiency, upscaling prospects, and management aspects of spent biosorbents: a Review. Applied Biochemistry and Biotechnology, 180, pp. 41-78. DOI: 10.1007/s12010-016-2083-y
  34. Ren, G., Jin, Y., Zhang, C., Gu, H. & Qu, J. (2015). Characteristics of Bacillus sp. PZ-1 and its biosorption to Pb(II). Ecotoxicology and Environment Safety, 117, pp. 141-148. DOI: 10.1016/j.ecoenv.2015.03.033
  35. Sag, Y. & Kutsal, T. (2000). Determination of activation energies of heavy metal ions on Zoogloe ramigera and Rhizopus arrhizus. Biochemical Engineering Journal, 35, pp. 145-151.
  36. Saha, G. C., Hoque, M., Miah, M., Holze, R., Chowdhury, D.A., Khandaker, S. & Chowdhury, S. (2017). Biosorptive removal of lead from aqueous solutions onto taro (colocasiaesculenta(l.) schott) as a low cost bioadsorbent: characterization, equilibria, kinetics and biosorption-mechanism studies. Journal of Environmental Chemical Engineering, 5, 2151-2162. DOI:10.1016/j.jece.2017.04.013
  37. Sahin, Y. & Ozturk, A. (2005). Biosorption of chromium (VI) ions from aqueous solution by the bacterium Bacillus thuringiensis. Process Biochemistry, 40, pp. 1895-1901. DOI: 10.1016/j.procbio.2004.07.002
  38. Selatnia, A., Boukazoula, A., Kechid, N., Bakhti, M. Z., Chergui, A. & Kerchich, Y. (2004). Biosorption of lead (II) from aqueous solution by a bacterial dead Streptomyces rimosus biomass. Biochemical Engineering Journal, 19, pp. 127-135. DOI: 10.1016/j.bej.2003.12.007
  39. Shroff, K. A. & Vaidya, V. K. (2011). Kinetics and equilibrium studies on biosorption of nickel from aqueous solution by dead fungal biomass of Mucor hiemalis. Chemical Engineering Journal, 171, pp. 1234-1245. DOI: 10.1016/j.cej.2011.05.034
  40. Siripongvutikorn, S., Asksonthong, R. & Usawakesmanee, W. (2016). Evaluation of harmful heavy metal (Hg, Pb and Cd) reduction using Halomonas elongata and Tetragenococcus halophilus for protein hydrolysate product. Functional Foods in Health & Disease, 6, pp. 195-205. DOI: 10.31989/ffhd.v6i4.240
  41. Song, W. C., Wang, X. X., Chen, Z. S., Sheng, G. D., Hayat, T., Wang, X. K. & Sun, Y. (2018). Enhanced immobilization of U(VI) on Mucor circinelloides in presence of As (V): Batch and XAFS investigation. Environmental Pollution, 237, pp. 228-236. DOI: 10.1016/j.envpol.2018.02.060
  42. Song, W. C., Wang, X. X., Wen, T., Yu, S. J., Zou, Y. D. & Sun, Y. B. (2016). Immobilization of As(V) in Rhizopus oryzae investigated by batch and XAFS techniques. ACS Omega, 1, pp. 899-906. DOI: 10.1021/acsomega.6b00260
  43. Tabaraki, R., Nateghi, A. & Ahmady-Asbchin, S. (2014). Biosorption of lead (II) ions on Sargassum ilicifolium: Application of response surface methodology. International Biodeterioration Biodegradation, 93, pp. 145-152. DOI: 10.1016/j.ibiod.2014.03.022
  44. Tang, L., Yu, J., Pang, Y., Zeng, G., Deng, Y., Wang, J., Ren, X., Ye, S., Bo, P. & Feng, H. (2017). Sustainable efficient adsorbent: alkali-acid modified magnetic biochar derived from sewage sludge for aqueous organic contaminant removal. Chemical Engineering Journal, 336, pp. 160-169. DOI: 10.1016/j.cej.2017.11.048
  45. Tunali, S., Cabuk, A. & Akar, T. (2006). Removal of lead and copper ions from soil. Chemcal Engineering Journal, 115, pp. 203-211. DOI: 10.1016/j.cej.2005.09.023
  46. Uzun, Y. & Şahan, T. (2017). Optimization with Response Surface Methodology of biosorption conditions of Hg(II) ions from aqueous media by Polyporus Squamosus fungi as a new biosorbent. Archives of Environmental Protection,43, pp. 37-43. DOI 10.1515/aep-2017-0015
  47. Wang, J. L. & Chen, C. (2006). Biosorption of heavy metals by Saccharomyces cerevisiae: A review. Biotechnology Advances, 24, pp. 427-451.
  48. Wang, N., Xu, X., Li, H., Wang, Q., Yuan, L. & Yu, H. (2017). High performance and prospective application of xanthate-modified thiourea chitosan sponge-combined Pseudomonas putida and Talaromyces amestolkiae biomass for Pb(II) removal from wastewater. Bioresource Technology, 233, pp. 58-66. DOI: 10.1016/j.biortech.2017.02.069
  49. Wang, T. S., Zheng, X. Y., Wang, X. Y., Lu, X. & Shen, Y. H. (2017). Different biosorption mechanisms of Uranium(VI) by live and heat-killed Saccharomyces cerevisiae under environmentally relevant conditions. Journal of Environmental Radioactivity, 167, pp. 92-99. DOI: 10.1016/j.jenvrad.2016.11.018
  50. Zheng, X. Y., Shen, Y. H., Wang, X. R., & Wang, T. S. (2018). Effect of pH on uranium(VI) biosorption and biomineralization by Saccharomyces cerevisiae. Chemosphere, 203, pp.109-116. DOI: 10.1016/j.chemosphere.2018.03.165
Go to article

Authors and Affiliations

Lei Liu
1 2
Mengya Xia
1
Jianwen Hao
1
Haoxi Xu
1
Wencheng Song
2 3

  1. School of Environment and Chemical Engineering, Anhui Vocational and Technical College,Hefei, 230011, P.R. China
  2. Hefei Cancer Hospital, Chinese Academy of Sciences, Hefei 230031, P. R. China
  3. Province Key Laboratory of Medical Physics and Technology, Institute of Health & Medical Technology,Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, 230031, P.R. China
Download PDF Download RIS Download Bibtex

Abstract

Cereal cyst nematodes (Heterodera spp.) are distributed globally and cause severe production losses of small grain cereals. To investigate the occurrence of cereal cyst nematodes in wheat-growing areas of Algeria, a survey was conducted and 27 cereal cyst nematode populations were collected. The populations were initially identified based on their morphological and morphometric characters, followed by molecular methods using speciesspecific primers, complemented by ITS-rDNA sequences. The morphological and morphometric features of second-stage juveniles (J2s) and cysts supported the presence of three Heterodera species: H. avenae, H. filipjevi and H. hordecalis. All morphological values of these distinct populations were very similar to those previously described for these species. Using species-specific primers for H. avenae and H. filipjevi, the specific bands of 109 bp and 646 bp confirmed the morphological identification of both species, respectively. In addition, the internal transcribed spacer (ITS) regions were sequenced to study the diversity of the 27 populations. These sequences were compared with those of Heterodera species available in the GenBank database (www.ncbi.nlm.nih.gov) and re-confirmed the identity of the species. Nineteen sequences of ITS-rDNA were similar (99–100%) to the sequences of H. avenae published in the GenBank, six sequences were similar (99–100%) to H. hordecalis, and two were similar (98–99%) to H. filipjevi. The results of this study are of great value to breeding programs and extension services, where they will contribute to the design of control measures to keep damaging nematodes in check.

Go to article

Authors and Affiliations

Djamel Smaha
Fouad Mokrini
Mustafa İmren
Aissa Mokabli
Abdelfattah A. Dababat
Download PDF Download RIS Download Bibtex

Abstract

There are few reports in literature about the selectivity of postemergence application of herbicides for the control of eudicotyledon weeds (broadleaf) in chickpea. For this reason, the aim of this study was to investigate the selectivity of diphenyl-ether herbicides in chickpea influenced by the herbicides and application rates. A field experiment was conducted from February to June 2017 in Urutaí, state of Goiás, Brazil. Cultivar BRS Aleppo was used in the experiment. The experiment was set up in a randomized block design with 2 × 3 + 1 factorial arrangement and three replications. The first factor was herbicides (fomesafen and lactofen) with the second factor being herbicide rate (50, 75, and 100% of referenced rate) plus an untreated check as a comparison. The applied rates of herbicides were 250 and 180 g ⋅ ha–1 of fomesafen and lactofen, respectively. The selectivity of herbicides was evaluated according to agronomic characteristics (plant population, height, dry matter, number of pods per plant and 100-grain weight) and yields. Both herbicides, regardless of dosage, were selective in chickpea cultivation, even exhibiting leaf necrosis symptoms with visible injuries below 20% with no effect on yield.

Go to article

Authors and Affiliations

Luís Gustavo Barroso Silva
Lucas da Silva Araújo
Daniel José Gonçalves
Mateus Souza Valente
Anderson Rodrigo da Silva
Warley Marcos Nascimento
Paulo César Ribeiro da Cunha
Download PDF Download RIS Download Bibtex

Abstract

In the present study, the effects of 10, 20, 30 ppm hormone mixtures (indole-3-acetic acid + gibberellic acid + kinetin) with 0.1, 0.3, 0.5 and 1 ppm zinc (Zn) concentrations alone and their mixtures on the cambial activity of sour cherry (Cerasus vulgaris Miller) cuttings were investigated. Morphological and anatomical developments of the plants were observed. The leaves of the plants treated with zinc were found to be greener than the control. Plants treated with zinc faded earlier than the control. The cambial zone thickness, the cambial zone cell line, the radial and tangential lengths of the cambial zone cells decreased with increasing concentrations of zinc and increased with increasing concentrations of hormones. The radial and tangential wall widths of the cambial zone cells increased with increasing zinc concentrations and decreased with increasing hormone concentrations. As a result, in the 0.1, 0.3, 0.5 and 1 ppm Zn concentrations, the cambial zone thickness decreased by 10, 28, 50 and 65%, respectively, compared to the control. Thirty ppm hormone mixture – H.M. (indole-3-acetic acid + gibberellic acid + kinetin) increased the cambial zone thickness by 65, 15, 5% in 0.1, 0.3 and 0.5 Zn, respectively, compared to the control. It was found that plant hormones importantly improved the harmful effects of zinc on the cambial activity of the plant cuttings.

Go to article

Authors and Affiliations

Kemal Yuce
Bekir Tileklioglu
Download PDF Download RIS Download Bibtex

Abstract

Globally more than 5.2 billion hectares of farming fields are damaged through erosion, salinity and soil deterioration. Many salt stress tolerant bacteria have plant growth promoting (PGP) characteristics that can be used to overcome environmental stresses. Isolation and screening of salt-tolerant endophytes from Salicornia brachiata were achieved through surface sterilization of leaves followed by cultivation on 4% NaCl amended media. Performance of isolates towards indole-3-acetic acid (IAA) production, phosphate solubilization, ACC deaminase activity, ammonia production, siderophore production and stress tolerance were determined. On the basis of the highest plant growth promoting activity, SbCT4 and SbCT7 isolates were tested for plant growth promotion with wheat and maize crops. In the present study, a total of 12 morphologically distinct salt-tolerant endophytic bacteria was cultured. Out of 12 isolates, 42% of salt-tolerant endophytes showed phosphate solubilization, 67% IAA production, 33% ACC-deaminase activity, 92% siderophore production, 41.6% ammonia production and 66% HCN production. A dendrogram, generated on the basis of stress tolerance, showed two clusters, each including five isolates. The bacterial isolates SbCT4 and SbCT7 showed the highest stress tolerance, and stood separately as an independent branch. Bacterial isolates increased wheat shoot and root dry weights by 60–82% and 50–100%, respectively. Similarly, improved results were obtained with maize shoot (27–150%) and root (80–126%) dry weights. For the first time from this plant the bacterial isolates were identified as Paenibacillus polymyxa SbCT4 and Bacillus subtilis SbCT7 based on phenotypic features and 16S rRNA gene sequencing. Paenibacillus polymyxa SbCT4 and B. subtilis SbCT7 significantly improved plant growth compared to non-inoculated trials.

Go to article

Authors and Affiliations

Arun Karnwal
Download PDF Download RIS Download Bibtex

Abstract

Rice blast is one of the most destructive rice diseases known to cause considerable yield losses globally. Plant growth promoting rhizobacteria (PGPR) and arbuscular mycorrhizal fungi (AMF) are closely associated with rice plants and improve plant growth and health. To determine how isolated bacteria trigger rice growth, an assessment of phosphate solubilization and auxin production mechanisms was carried out in vitro and in vivo. In this study, the interactions between PGPR and Rhizophagus irregularis were evaluated in wildtype and CYCLOPS mutant plants to provide a sustainable solution against blast disease and reduce the amount of yield loss. Importantly, Bacillus subtilis UTSP40 and Pseudomonas fluorescens UTSP50 exhibited a suppressive effect on AMF colonization which shows the probable existence of a functional competition between AMF and PGPR to dominate the rhizosphere. On the other hand, R. irregularis decreased the biocontrol activity of B. subtilis UTSP40 in wild type, although this reduction was not significant in mutant plants. Results showed that the same defense-related genes were induced in the roots of wild type colonized by B. subtilis UTSP40 and R. irregularis. Therefore, plant cell programs may be shared during root colonization by these two groups of beneficial microorganisms.

Go to article

Authors and Affiliations

Samira Peighami Ashnaei
Download PDF Download RIS Download Bibtex

Abstract

Interest in growing roses in Poland is related to the production of cut flowers as ornamentals and of petals and hips for cosmetics or food products. However, recently there has been an increasing number of reports of pest damage on rose plantations. In the case of fruits the damage has been attributed to flies (Rhagoletis alternata) or moths (Cydia tenebrosana), while nematodes have been implicated for growth reduction even on plantations grown under soil-less conditions. Field trials and laboratory experiments to test the possibility of controlling R. alternata larvae or pupae with entomopathogenic fungi and nematodes resulted in a lack of parasitism. On the other hand, the use of Bacillus thuringiensis subsp. kurstaki or Cydia pomonella granulovirus effectively controlled C. tenebrosana. Meloidogyne incognita infestation of roses growing on rock wool substrate was drastically reduced by Arthrobothrys oligospora or abamectin. Factors such as the method of product application or pest susceptibility to the used microbial-based products accounted for the observed differences in efficacy.

Go to article

Authors and Affiliations

Eligio Malusá
Malgorzata Tartanus
Grażyna Soika
Download PDF Download RIS Download Bibtex

Abstract

The aim of this work was to evaluate the use of the naphthalic anhydride safener on the protection of common bean cultivars BRS-Estilo (carioca) and BRS-Esplendor (black) from negative effects of herbicides. Two experiments were conducted, one for each cultivar in a complete randomized design with five replications, in a 6 × 3 factorial scheme, with six herbicide treatments: bentazon, fluazifop-P + fomesafen, bentazon + imazamox, fomesafen, cloransulam, and control without application, and three naphthalic anhydride treatments: without application, foliar application, and application via seed treatment. Visible injuries at 7, 14 and 21 days after application, photosystem II electron transport rate, and plant dry weight were evaluated. The naphthalic anhydride applied via foliar, and seed treatment reduced significantly the visible injuries in relation to the control when using the herbicides bentazon, fluazifop-P + fomesafen, bentazon + imazamox, and cloransulam. The photosystem II electron transport rate was protected by anhydride applied via foliar and seed treatment when using the herbicides bentazon, fluazifop-P + fomesafen and bentazon + + imazamox. The application of naphthalic anhydride via seed treatment protected the BRS-Estilo and BRS-Esplendor common bean cultivars, with no reductions in the plant dry weight when using the herbicides fluazifop-P + fomesafen, and fomesafen. The use of naphthalic anhydride via seed treatment and foliar application protected BRS-Estilo and BRSEsplendor common bean cultivars, from the negative effects of fluazifop-P + fomesafen and fomesafen herbicides. Thus, this practice has potential to be used in common beans.

Go to article

Authors and Affiliations

Fábio Henrique Krenchinski
Edicarlos Batista de Castro
Victor José Salomão Cesco
Diego Belapart
Danilo Morilha Rodrigues
Caio Antonio Carbonari
Edivaldo Domingues Velini
Download PDF Download RIS Download Bibtex

Abstract

Two field experiments were established at the Agricultural Experimental Station of the National Research Centre at Nubaria, Beheira Governorate, Egypt to study the herbicidal potential of the leaf extract of Eucalyptus citriodora at 5, 10, 15, 20 and 25% compared to two hand hoeing, unweeded treatments and the chemical herbicides Bentazon + Clethodium, Bentazon + Fluazifop-P-butyl and Butralin on pea plants and associated weeds. The results indicated that two hand hoeing achieved the maximum weed depression as expressed by the dry matter of total weeds. The dry matter of total weeds decreased by 95.08 to 94.77% as compared with unweeded treatment 50 and 70 days after sowing (DAS) followed by Butraline (93.93–94.65%), Bentazon + Clethodium (93.26–94.07%), Bentazon + Fluazifop--P-butyl (91.82–92.77%) and leaf extract of Eucalyptus at 25% (91.61–91.95%). Furthermore, the reduction in weed development was accompanied by enhanced pea growth and yield. The results revealed that two hand hoeing was the best treatment to increase plant height, shoot dry weight and SPAD value at 50 and 70 DAS. Also, two hand hoeing produced the maximum values of pod length and number of seeds/pod. The results also indicated that Bentazon + Clethodium treatment gave observable values [recorded 72.96% in pod yield (ton ⋅ fed.–1) over that of unweeded control] of number of pod/plant, weight of pod/plant, seed yield/fed and protein percentage. Also, the results revealed great increases in the growth of pea as well as yield due to treatment with E. citriodora dry leaf extract at 25%. [recorded 64.8% in in pod yield (ton ⋅ fed.–1) over that of unweeded control]. So, the results indicated using Bentazon + Clethodium as well as E. citriodora dry leaf extract at 25% to control weeds associated with pea plants. The authors suggested application of E. citriodora dry leaf extract at 25% in controlling weeds associated with pea plants as a safe method that avoids environmental contamination.

Go to article

Authors and Affiliations

Ibrahim Mohamed El-Metwally
Kowthar Gad El-Rokiek
Download PDF Download RIS Download Bibtex

Abstract

Pest mites of the family Tetranychidae are commonly reported in several legumes. However, reports of their occurrence in lima beans are insipient, especially in Brazil. The objective of this research was to record the occurrence of mites in lima bean plants and to describe their damage in this Fabaceae. Tetranychus neocaledonicus André and Mononychellus planki McGregor were found in lima bean plants, Phaseolus lunatus (Fabaceae or Leguminosae). The lima bean plants, when infested by these mites, initially exhibit small whitish spots in the leaflets, which with increasing population density rapidly evolve into chlorotic patches, followed by silvering, and may dry out and fall due to their overfeeding. The extent of the damage caused to lima bean plants and the adaptability of the mite to warm and dry conditions indicate that T. neocaledonicus has greater potential as a lima bean pest than M. planki in northeastern Brazil. This is the first record of these mites associated with P. lunatus.

Go to article

Authors and Affiliations

Antonio Vieira Gomes Neto
Paulo Roberto Ramalho Silva
Jayara Dayany Costa Silva
Mayara Fernandes dos Santos
José Wagner da Silva Melo
Solange Maria de França
Download PDF Download RIS Download Bibtex

Abstract

The insecticidal efficiency of Ag-loaded 4A-zeolite (ZAg) and its formulations with Rosmarinus officinalis essential oil (RO) was evaluated against Sitophilus oryzae (L.) and Rhyzopertha dominica (F.). For comparison, different rates of ZAg (0.25, 0.5, 0.75, and 1 g ⋅ kg–1 wheat) were used solely and in a combination with LC50 concentrations of RO. Mortality was assessed after 7, 14, and 21 days of insect exposure to treated wheat. The progeny production was also evaluated. The use of ZAg accomplished a complete mortality (100%) on S. oryzae and 96.67% on R. dominica as well as 100% mortality of progeny against the two insect species after the longest exposing duration (21 days), at the highest rate (1 g ⋅ kg–1). On the other hand, the complete mortalities of ZAg formulations on S. oryzae were obtained after 14 d of treatment with F1 formulation (0.605 g ⋅ kg–1 RO + 0.25 g ⋅ kg–1 ZAg) and after 7 days with the other tested formulations. In addition, the complete mortality on R. dominica was obtained only by F8 (0.059 g ⋅ kg–1 RO + 1 g ⋅ kg–1 ZAg) formulation after 14 days of treatment. Concerning the efficiency of the examined formulations on the progeny of S. oryzae, F1 (0.605 g ⋅ kg–1 RO + 0.25 g ⋅ kg–1 ZAg) and F2 (0.605 g ⋅ kg–1 RO + 0.5 g ⋅ kg–1 ZAg) formulations recorded 100% mortality. In addition, F3 (0.605 g ⋅ kg–1 RO + 0.75 g ⋅ kg–1 ZAg) and F4 (0.605 g ⋅ kg–1 RO + 1 g ⋅ kg–1 ZAg) formulations suppressed the progeny production. Furthermore, the complete mortality of R. dominica progeny was obtained with F7 (0.059 g ⋅ kg–1 RO + 0.75 g ⋅ kg–1 ZAg) and F8 (0.059 g ⋅ kg–1 RO + 1 g ⋅ kg–1 ZAg) formulations. ZAg, especially its formulations with R. officinalis oil, had potential effects against two stored-product insects. F1 and F8 formulations could be treated efficiently on S. oryzae and R. dominica, respectively.

Go to article

Authors and Affiliations

Ahmed M. El-Bakry
Hanan F. Youssef
Nahed F. Abdel-Aziz
Elham A. Sammour
Download PDF Download RIS Download Bibtex

Abstract

Tomato is an economically important vegetable crop which is attacked heavily by insect pests leading to reduction of yield and quality of the fruits. Field experiments were carried out to investigate the dissipation of methomyl (a common insecticide) used mainly on tomato fruits. LC-MS/MS coupled with the QuEChERS method were used for the determination of methomyl. The results showed that the recovery using matrix-matched standards ranged from 87.8 to 101.3%, with relative standard deviation of 2.5 to 7.5%. Kinetics equation, Log R = log R0 – 0.434 Kt, was used to calculate the rate of degradation in tomato, soil and water. Residue half-life calculated using kinetic rate ranged from 1.95 to 1.63 days in tomato and soil, respectively. From the results it was concluded that tomato fruits can be safely harvested for consumption after 15 days of application based on estimated preharvest interval (PHI). It is advisable to re-estimate the PHI regularly owing to data from the EU and Codex.

Go to article

Authors and Affiliations

Dalia El-Hefny
Ibrahim Abdallah
Rania Helmy
Hend Mahmoud
Download PDF Download RIS Download Bibtex

Abstract

Polyphenol oxidase partial gene PG-PPO was cloned and characterized from Pennisetum glaucum (pearl millet) which showed 42% identity to a PPO sequence isolated from wheat at the region of Copper B with a score of 40 and e-value of 2.8. Multiple sequence alignment results revealed similarity to polyphenol oxidase (PPO) sequences from wheat, trifolium, lettuce, apricot, tobacco, tomato, pokeweed, apple, grape and poplar especially at the Copper B region of PPO. The 395 bp pearl millet PPO sequence was AT rich (53.3%) and contained the highly conserved amino acids of histidine-rich copper binding sites similar to PPO sequences from other crops. Results also indicated that PPO in pearl millet exists in multi copy. The role of the isolated PPO gene during pearl millet-downy mildew interaction was analyzed and the results showed significantly higher and rapid accumulation of PPO mRNAs in resistant pearl millet seedlings inoculated with Sclerospora graminicola in comparison to the susceptible control, demonstrating that the PPO plays a prominent role in pearl millet defense against pathogens, particularly downy mildew pathogen.

Go to article

Authors and Affiliations

Sathyanarayana Niranjan-Raj
Senapathyhally Nagaraju Lavanya
Siddaiah Chandra Nayaka
Download PDF Download RIS Download Bibtex

Abstract

Root associated bacteria were isolated from Suaeda nudiflora and two isolates were selected for this study: rhizospheric Bacillus megaterium and endophytic Pseudomonas aeruginosa. These isolates were inoculated into maize variety Narmada Moti during its germination. TTC (2, 3, 5-triphenyl tetrazolium chloride) staining was used to confirm the association of the isolates with the maize root. The effects of these root associated bacteria were tested alone and in combinations for cell wall reinforcement and the induction of defense enzymes such as phenylalanine ammonia lyase (PAL) and β-1,3-glucanase in the presence of fungal pathogen Aspergillus niger in maize. The results indicated that the rhizospheric bacteria had a greater fight response to fungal infection than the endophhytic bacteria due to cell wall lignification as well as the rapid induction of higher concentrations of defense related enzymes.

Go to article

Authors and Affiliations

Yachana Jha
Download PDF Download RIS Download Bibtex

Abstract

Genetically modified Bt cotton (Gossypium hirsutum) leaves with typical symptoms of Alternaria early blight disease resembling that of tomato and potato were observed in the main cotton growing schemes in Sudan. Symptoms on leaves appeared as either brown 2leaf spot with gray centers or leaf blight with concentric rings. Pathogenicity tests using isolates with both symptoms showed that the isolated fungi were highly pathogenic to both G. hirsutum and G. barbadense cotton varieties. Alternaria alternata isolated from infected tomato and potato leaves with early blight symptoms was included for comparison. Microscopic examination showed that the mean length of conidia from cotton, tomato and potato isolates ranged from 26.25 to 45.45 μm, while the width ranged from 9.56 to 13.64 μm. The mean number of transverse septa among all isolates was 3.4 to 5.7 and the peak length ranged from 3.75 to 7.8 μm. Based on morphological characteristics the two isolates from cotton were identified as A. alternata. Genomic DNA was extracted directly from fungal cultures grown on potato dextrose agar (PDA) plates using a Zymo Research Quick DNA kit. A species-specific primer using the internal transcribed spacer ribosomal DNA (ITS rDNA) PCR scoring indicated the presence of A. alternata using primer pair ITS4/ITS5. Amplifications of the internal transcribed spacer region of 600 bp revealed 100% identity of the isolated fungus from cotton with A. alternata from tomato and potato. These data oblige us to reconsider the presence of A. alternata in the four main cotton growing schemes in Sudan while these symptoms have always been described for tomato and potato early blight disease.

Go to article

Authors and Affiliations

Omyma Elmahi Mohamed
Mayada Mamoun Beshir
Nafisa Elmahi Ahmed
Download PDF Download RIS Download Bibtex

Abstract

The association of phytoplasma was investigated in sand olive [Dodonaea viscosa ssp. Angustifolia (L. f.) J.G. West], cowpea [Vigna unguiclata (L.)] Wap and alfalfa (Medicago sativa L.) plants exhibiting witches broom, fasciation and little leaf symptoms, respectively. Sequence analysis of ~1.7 kb DNA fragments amplified by P1/P7 primer set confirmed the association of ‘Candidatus Phytoplasma aurantifolia’ within symptomatic alfalfa, while ‘Ca. Phytoplasma cynodontis’ was associated within cowpea and sand olive.

Go to article

Authors and Affiliations

Nawres Al-Kuwaiti
Tareq Kareem
Feryal H. Sadaq
Laith H. AL-Aadhami
Download PDF Download RIS Download Bibtex

Abstract

Potato (Solanum tuberosum L.), an important food crop in the world, is susceptible to many fungal pathogens including Alternaria solani and Fusarium oxysporum causing Fusarium wilt and early blight diseases. Mycoparasitic fungi like Trichoderma encode chitinases, cell wall degrading enzymes, with high antifungal activity against a wide range of phytopathogenic fungi. In this study, a binary vector harboring endochitinase gene of ~1,000 bp was constructed and used to transform potato nodes through Agrobacterium-mediated transformation. Out of several primary transformants, two transgenic potato lines were verified for transgene insertion and integration by Southern blot. In a pot experiment for Fusarium resistance, the transgenic potato lines didn’t show any symptoms of disease, instead they remained healthy post infection. The transgenic potato lines exhibited 1.5 fold higher mRNA expression of endochitinase at 7 days as compared to 0 day post fungus inoculation. It was evident that the mRNA expression decreased over days of inoculation but was still higher than at 0 day and remained stable upto 30 days post inoculation. Similarly, for A. solani infection assay, the mRNA expression of the endochitinase gene was 3 fold higher 7 days post inoculation compared to expression at 0 day. Although the expression decreased by1.2 fold during subsequent days post infection, it remained stable for 30 days, suggesting that protection in transgenic potato plants against fungal pathogens was achieved through an increase in endochitinase transcript.

Go to article

Authors and Affiliations

Neelam Fatima
Bushra Tabassum
Iqra Yousaf
Momina Malik
Anwar Khan
Imtiaz Ahmad Sajid
Muhammad Tariq
Nida Toufiq
Saman Riaz
Idrees Ahmad Nasir
Download PDF Download RIS Download Bibtex

Abstract

In the previous study, we designed one personal rescue winch for high-rise building rescue. Its key requirement is to be small and light enough to suit users. In addition to using lightweight and reasonable materials as in the proposed winch design, in this study, we proceed to optimize the weight of one two-level gear train, which accounts for a large proportion of weight. The first stage is building a weight optimization problem model with seven independent variables, establishing one optimal algorithm, and investigating the variables by Matlab software. The other is replacing the web material of the gears and pinions with Aluminum 6061-T6 and optimizing their hole diameters and hole numbers through using Ansys software. The obtained result shows a significant weight reduction. Compared to the original design, the weight reduces by 10.21% and 52.40% after the first optimal and last stages, respectively.
Go to article

Bibliography

[1] J.E. Renton and P.T.M. Nott. Personal height rescue apparatus. Patent No. US9427607B2, 2016.
[2] J. Tremblay. Tower rescue emergency module. Patent No. US2013/0206505A1, 2013.
[3] V.T. Nguyen, K.A. Nguyen, and V.L. Nguyen. An improvement of a hydraulic selfclimbing formwork. Archive of Mechanical Engineering, 66(4):495–507, 2019. doi: 10.24425/ame.2019.131419.
[4] T.G. Duong, V.T. Nguyen, and T.T.D. Nguyen. Research on designing the individual rescue winch. Journal of Science and Technology in Civil Engineering, 15(1V):123–133, 2021. doi: 10.31814/stce.nuce2021-15(1V)-11.
[5] R.V. Rao and V.J. Savsani. Mechanical Design Optimization Using Advanced Optimization Techniques. Springer, 2012.
[6] M.W. Huang and J.S. Arora. Optimal design with discrete variables: some numerical experiments. International Journal for Numerical Methods in Engineering, 40:165–188, 1997. doi: 10.1002/(sici)1097-0207(19970115)40:1165::aid-nme60>3.0.co;2-i.
[7] J.S. Arora and M.W. Huang. Discrete structural optimization with commercially available sections. Structural Eng./Earthquake Eng., JSCE, 13(2):93–110, 1996. doi: 10.2208/jscej.1996.549_1.
[8] T. Yokota, T. Taguchi, and M. Gen. A solution method for optimal weight design problem of the gear using genetic algorithms. Computer & Industrial Engineering, 35(3-4):523–526, 1998. doi: 10.1016/s0360-8352(98)00149-1.
[9] H. Reddy, J.A.S. Kumar, and A.V. Hari Babu. Minimum weight optimization of a gear train by using genetic algorithm. International Journal of Current Engineering and Technology, 6(4):1119–1124, 2016.
[10] B. Mahiddini, T. Chettibi, K. Benfriha, and A. Aoussat. Optimum design of a spur gear using a two level optimization. Mechanika, 25(4): 304–312, 2019. doi: 10.5755/j01.mech.25.4.18994.
[11] S. Kirkpatrick, C.D. Gelatt Jr., and M.P. Vecchi. Optimization by simulated annealing. Science, 220(4598):671–680, 1983. doi: 10.1126/science.220.4598.671.
[12] P. Starry, E. Dupinet, and M. Mekhilef. A new way to optimize mechanical systems using simulated annealing. Transactions on the Built Environment, 2:569–583, 1993.
[13] V. Savsani, R.V. Rao, and D.P. Vakharia. Optimal weight design of a gear train using particle swarm optimization and simulated annealing algorithms. Mechanism and Machine Theory, 45(3):531–541, 2010. doi: 10.1016/j.mechmachtheory.2009.10.010.
[14] N. Godwin Raja Ebenezer, S. Ramabalan, and S. Navaneethasanthakumar. Practical optimal design on two stage spur gears train using nature inspired algorithms. International Journal of Engineering and Advanced Technology, 8(6):4073–4081, 2019. doi: 10.35940/ijeat.F8638.088619.
[15] V. Pimpalte and S.C. Shilwant. Topology optimization of gears from two wheeler gear set using parametric study. IOSR Journal of Mechanical and Civil Engineering, 14(1):22–31, 2017. doi: 10.9790/1684-1401022231.
[16] R. Ramadani, A. Belsak, M. Kegl, J. Predan, and S. Pehan. Topology optimization based design of lightweight and low vibration gear bodies. International Journal of Simulation Modelling, 17(1):92–104, 2018. doi: 10.2507/IJSIMM17(1)419.
[17] A.J. Muminovic, A. Muminovic, E. Mesic, I. Saric, and N. Pervan. Spur gear tooth topology optimization: finding optimal shell thickness for spur gear tooth produced using additive manufacturing. TEM Journal, 8(3):788–794, 2019. doi: 10.18421/TEM83-13.
[18] ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering – Modules. International Organization for Standardization, 1996.
[19] R.G. Budynas and J.K. Nisbett. Shigley’s Mechanical Engineering Design. 10th edition, McGraw-Hill, 2020.
Go to article

Authors and Affiliations

Truong Giang Duong
1
ORCID: ORCID
Van Tinh Nguyen
1
Tien Dung Nguyen
1

  1. Faculty of Mechanical Engineering, National University of Civil Engineering, Hanoi, Vietnam.
Download PDF Download RIS Download Bibtex

Abstract

In this paper, a numerical and experimental investigation of geometrical parameters of the blade for plastic bottle shredder was performed based on the Taguchi method in combination with a response surface method (RSM). Nowadays, plastic waste has become a major threat to the environment. Shredding, in which plastic waste is shredded into small bits, ready for transportation and further processing, is a crucial step in plastic recycling. Although many studies on plastic shredders were performed, there was still a need for more researches on the optimization of shredder blades. Hence, a numerical analysis was carried out to study the influences of the relevant geometrical parameters. Next, a two-step optimization process combining the Taguchi method and the RSM was utilized to define optimal parameters. The simulation results clearly confirmed that the current technique can triumph over the limitation of the Taguchi method, originated from a discrete optimization nature. The optimal blade was then fabricated and experimented, showing lower wear via measurement by an ICamScope® microscope. Hence, it can be clearly inferred from this investigation that the current optimization method is a simple, sufficient tool to be applied in such a traditional process without using any complicated algorithms or expensive software.
Go to article

Bibliography

[1] S. Alavi, S. Thomas, K.P. Sandeep, N. Kalarikkal, J. Varghese, and S.Yaragalla. Polymers for Packaging Applications. Apple Academic Press, 2014.
[2] A.W. Ayo, O.J. Olukunle, and D.J. Adelabu. Development of a waste plastic shredding machine. International Journal of Waste Resources, 7(2):1-4, 2017.
[3] P.K. Farayibi. Finite element analysis of plastic recycling machine designed for production of thin filament coil. Nigerian Journal of Technology, 36(2):411–420, 2017. doi: 10.4314/njt.v36i2.13.
[4] S. Reddy and T. Raju. Design and development of mini plastic shredder machine. IOP Conference Series: Materials Science and Engineering, 455:012119, 2018. doi: 10.1088/1757-899x/455/1/012119.
[5] D. Atadious and O.J. Oyejide. Design and construction of a plastic shredder machine for recycling and management of plastic wastes. International Journal of Scientific & Engineering Research, 9(5):1379–1385, 2018.
[6] Y.M. Sonkhaskar, A. Sahu, A. Choubey, A. Singh, and R. Singhal. Design and development of a plastic bottle crusher. International Journal of Engineering Research & Technology, 3(10), 297–300, 2014.
[7] M.I. Faiyyaj, M.R. Pradip, B.J. Dhanaji, D.P. Chandrashekhar, and J.S. Shivaji. Design and development of plastic shredding machine. International Journal of Engineering Technology Science and Research, 4(10):733–737, 2017.
[8] S.B. Satish, J.S. Sandeep, B. Sreehari, and Y.M. Sonkhaskar. Designing of a portable bottle crushing machine. International Journal for Scientific Research & Development, 4(7):891–893, 2016.
[9] N.D. Jadhav, A. Patil, H. Lokhande, and D. Turambe. Development of plastic bottle shredding machine. International Journal of Waste Resources, 08(2):1000336, 2018. doi: 10.4172/2252-5211.1000336.
[10] T.A. Olukunle. Design consideration of a plastic shredder in recycling processes. International Journal of Industrial and Manufacturing Engineering, 10(11):1838–1841, 2016. doi: 10.5281/zenodo.1127242.
[11] A. Tegegne, A. Tsegaye, E. Ambaye, and R. Mebrhatu. Development of dual shaft multi blade waste plastic shredder for recycling purpose. International Journal of Research and Scientific Innovation, 6(1):49–55, 2019.
[12] J.M.A. Jaff, D.A. Abdulrahman, Z.O. Ali, K.O. Ali, and M.H. Hassan. Design and fabrication recycling of plastic system. International Journal of Scientific & Engineering Research, 7(5):1471–1486, 2016.
[13] S.Yadav, S. Thite, N. Mandhare, A. Pachupate, and A. Manedeshmukh. Design and development of plastic shredding machine. Journal of Applied Science and Computations, 6(4):21–25, 2019.
[14] S. Ravi. Utilization of upgraded shredder blade and recycling the waste plastic and rubber tyre. International Conference on Industrial Engineering and Operations Management, pages 3208–3216, Paris, France, 26-27 July 2018.
[15] M.F. Nasr and K.A. Yehia. Stress analysis of a shredder blade for cutting waste plastics. Journal of International Society for Science and Engineering, 1(1):9–12, 2019. doi: 10.21608/jisse.2019.20292.1017.
[16] C. Pedraza-Yepes, M.A. Pelegrina-Romero, and G.J. Pertuz-Martinez. Analysis by means of the finite element method of the blades of a PET shredder machine with variation of material and geometry. Contemporary Engineering Sciences, 11(83):4113–4120, 2018. doi: 10.12988/ces.2018.88370.
[17] A. Ikpe and O. Ikechukwu. Design of used PET bottles crushing machine for small scale industrial applications. International Journal of Engineering Technologies, 3(3):157–168, 2017. doi: 10.19072/ijet.327166.
[18] N.Y. Mahmood. Prediction of the optimum tensile – shear strength through the experimental results of similar and dissimilar spot welding joint. Archive of Mechanical Engineering, 67(2):197–210, 2020. doi: 10.24425/ame.2020.131690.
[19] R. Świercz, D. Oniszczuk-Świercz, and L. Dąbrowski. Electrical discharge machining of difficult to cut materials. Archive of Mechanical Engineering, 65(4):461–476, 2018. doi: 10.24425/ame.2018.125437.
[20] T.K. Nguyen, C.J.Hwang, and B.-K. Lee. Numerical investigation of warpage in insert injection-molded lightweight hybrid products. International Journal of Precision Engineering and Manufacturing, 18(2):187–195, 2017. doi: 10.1007/s12541-017-0024-5.
[21] T.K. Nguyen and B.-K. Lee. Investigation of processing parameters in micro-thermoforming of micro-structured polystyrene film. Journal of Mechanical Science and Technology, 33(12):5669–5675, 2019. doi: 10.1007/s12206-019-1109-0.
[22] T.K. Nguyen, A.-D. Pham, M.Q. Chau, X.C. Nguyen, H.A.D. Pham, M.H. Pham, T.P. Nguyen, and H.S. Nguyen. Development and characterization of a thermoforming apparatus using axiomatic design theory and Taguchi method. Journal of Mechanical Engineering Research and Developments, 43(6):255–268, 2020.
[23] R.O. Ebewele. Polymer Science and Technology. 1st edition. CRC Press, Boca Raton, 2000. doi: 10.1201/9781420057805.
Go to article

Authors and Affiliations

Trieu Khoa Nguyen
1
ORCID: ORCID
Minh Quang Chau
1
ORCID: ORCID
The-Can Do
2
Anh-Duc Pham
2
ORCID: ORCID

  1. Faculty of Mechanical Engineering, Industrial University of Ho Chi Minh City, Ho Chi Minh City, Vietnam.
  2. Faculty of Mechanical Engineering, The University of Danang – University of Science and Technology, Da Nang City, Vietnam.
Download PDF Download RIS Download Bibtex

Abstract

In this paper a versatile analysis of the cycloidal gearbox vibrations and the resonance phenomenon was performed. The objective of this work was to show resonance phenomenon and vibrations study in the multibody dynamics model and in the finite element model of the cycloidal gearbox. The output torque was analyzed as a function of the external sleeves stiffness.
The results from the multibody dynamics model were verified in the finite element model using natural frequency with load stiffening, direct frequency response and direct transient response analyses.
It was shown that natural frequencies of the cycloidal gearbox undergo changes during motion of the mechanism. The gearbox passes through the thresholds of the increased vibration amplitudes, which lead to excessive wear of the external sleeves.
The analysis in the multibody dynamics model showed, that the increase in the external sleeves stiffness increases frequency of the second-order fluctuation at the output shaft. Small stiffness of the external sleeves guarantees lower frequency of the second order vibrations and higher peak-to-peak values of the output torque.
The performed research plays important role in the cycloidal gearbox design. This work shows gearbox dynamics problems which are associated with wear of the external sleeves.
Go to article

Bibliography

[1] M.Blagojević, M. Matejić, and N. Kostić. Dynamic behaviour of a two-stage cycloidal speed reducer of a new design concept. Technical Gazette, 25(Supplement 2):291–298, 2018. doi: 10.17559/TV-20160530144431.
[2] M. Wikło, R. Król, K. Olejarczyk, and K. Kołodziejczyk. Output torque ripple for a cycloidal gear train. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(21–22):7270–7281, 2019. doi: 10.1177/0954406219841656.
[3] N. Kumar, V. Kosse, and A. Oloyede. A new method to estimate effective elastic torsional compliance of single-stage Cycloidal drives. Mechanism and Machine Theory, 105:185–198, 2016. doi: 10.1016/j.mechmachtheory.2016.06.023.
[4] C.-F. Hsieh. The effect on dynamics of using a new transmission design for eccentric speed reducers. Mechanism and Machine Theory, 80:1–16, 2014. doi: 10.1016/j.mechmachtheory.2014.04.020.
[5] R. Król. Kinematics and dynamics of the two stage cycloidal gearbox. AUTOBUSY – Technika, Eksploatacja, Systemy Transportowe, 19(6):523–527, 2018. doi: 10.24136/atest.2018.125.
[6] K-.S. Lin, K.-Y. Chan, and J.-J. Lee. Kinematic error analysis and tolerance allocation of cycloidal gear reducers. Mechanism and Machine Theory, 124:73–91, 2018. doi: 10.1016/j.mechmachtheory.2017.12.028.
[7] L. X. Xu, B. K. Chen, and C.Y. Li. Dynamic modelling and contact analysis of bearing-cycloid-pinwheel transmission mechanisms used in joint rotate vector reducers. Mechanism and Machine Theory, 137:432–458, 2019. doi: 10.1016/j.mechmachtheory.2019.03.035.
[8] A. Robison and A. Vacca. Multi-objective optimization of circular-toothed gerotors for kinematics and wear by genetic algorithm. Mechanism and Machine Theory, 128:150–168, 2018. doi: 10.1016/j.mechmachtheory.2018.05.011.
[9] R. Król, M. Wikło, K. Olejarczyk, K.Kołodziejczyk, and A. Zieja. Optimization of the one stage cycloidal gearbox as a non-linear least squares problem. In: T. Uhl (ed.) Advances in Mechanism and Machine Science. Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science, pages 1039–1048, Cracow, Poland, 15-18 July, 2019. doi: 10.1007/978-3-030-20131-9_103.
[10] R. Król. Updated software for the one stage cycloidal gearbox optimization (MATLAB scripts) (2.0). Zenodo, 2021. doi: 10.5281/zenodo.4737264.
[11] L. X. Xu and Y. H. Yang. Dynamic modeling and contact analysis of a cycloid-pin gear mechanism with a turning arm cylindrical roller bearing. Mechanism and Machine Theory, 104:327–349, 2016. doi: 10.1016/j.mechmachtheory.2016.06.018.
[12] M. Pfabe and C. Woernle. Reducing torsional vibrations by means of a kinematically driven flywheel – Theory and experiment. Mechanism and Machine Theory, 102:217–228, 2016. doi: 10.1016/j.mechmachtheory.2016.03.011.
[13] Y. Chen, X. Liang, and M. J. Zuo. Sparse time series modeling of the baseline vibration from a gearbox under time-varying speed condition. Mechanical Systems and Signal Processing, 134:106342, 2019. doi: 10.1016/j.ymssp.2019.106342.
[14] R. Yang, F. Li, Y. Zhou, and J. Xiang. Nonlinear dynamic analysis of a cycloidal ball planetary transmission considering tooth undercutting. Mechanism and Machine Theory, 145:103694, 2020. doi: 10.1016/j.mechmachtheory.2019.103694.
[15] W. He, B. Chen, N. Zeng, and Y. Zi. Sparsity-based signal extraction using dual Q-factors for gearbox fault detection. ISA Transactions, 79:147–160, 2018. doi: 10.1016/j.isatra.2018.05.009.
[16] D. Zhang and D. Yu. Multi-fault diagnosis of gearbox based on resonance-based signal sparse decomposition and comb filter. Measurement, 103:361–369, 2017. doi: 10.1016/j.measurement.2017.03.006.
[17] C.U. Mba, V. Makis, S. Marchesiello, A. Fasana, and L. Garibaldi. Condition monitoring and state classification of gearboxes using stochastic resonance and hidden Markov models. Measurement, 126:76–95, 2018. doi: 10.1016/j.measurement.2018.05.038.
[18] C. Wang, H. Li, J. Ou, R. Hu, S. Hu, and A. Liu. Identification of planetary gearbox weak compound fault based on parallel dual-parameter optimized resonance sparse decomposition and improved MOMEDA. Measurement, 165:108079, 2020. doi: 10.1016/j.measurement.2020.108079.
[19] W. Teng, X. Ding, H. Cheng, C. Han, Y. Liu, and H. Mu. Compound faults diagnosis and analysis for a wind turbine gearbox via a novel vibration model and empirical wavelet transform. Renewable Energy, 136:393–402, 2019. doi: 10.1016/j.renene.2018.12.094.
[20] Y. Lei, D. Han, J. Lin, and Z. He. Planetary gearbox fault diagnosis using an adaptive stochastic resonance method. Mechanical Systems and Signal Processing, 38(1):113–124, 2013. doi: 10.1016/j.ymssp.2012.06.021.
[21] L. Hong, Y. Qu, J. S. Dhupia, S. Sheng, Y. Tan, and Z. Zhou. A novel vibration-based fault diagnostic algorithm for gearboxes under speed fluctuations without rotational speed measurement. Mechanical Systems and Signal Processing, 94:14–32, 2017. doi: 10.1016/j.ymssp.2017.02.024.
[22] S. Schmidt, P. S. Heyns, and J. P. de Villiers. A novelty detection diagnostic methodology for gearboxes operating under fluctuating operating conditions using probabilistic techniques. Mechanical Systems and Signal Processing, 100:152–166, 2018. doi: 10.1016/j.ymssp.2017.07.032.
[23] T. Wang, Q. Han, F. Chu, and Z. Feng. Vibration based condition monitoring and fault diagnosis of wind turbine planetary gearbox: A review. Mechanical Systems and Signal Processing, 126:662–685, 2019. doi: 10.1016/j.ymssp.2019.02.051.
[24] S. Schmidt, P. S. Heyns, and K. C. Gryllias. A methodology using the spectral coherence and healthy historical data to perform gearbox fault diagnosis under varying operating conditions. Applied Acoustics, 158:107038, 2020. doi: 10.1016/j.apacoust.2019.107038.
[25] Y. Li, K. Feng, X. Liang, and M.J. Zuo. A fault diagnosis method for planetary gearboxes under non-stationary working conditions using improved Vold-Kalman filter and multi-scale sample entropy. Journal of Sound and Vibration, 439:271–286, 2019. doi: 10.1016/j.jsv.2018.09.054.
[26] S. Tong, Y. Huang, Y. Jiang, Y. Weng, Z. Tong, N. Tang, and F. Cong. The identification of gearbox vibration using the meshing impacts based demodulation technique. Journal of Sound and Vibration, 461:114879, 2019. doi: 10.1016/j.jsv.2019.114879.
[27] X. Chen and Z. Feng. Time-frequency space vector modulus analysis of motor current for planetary gearbox fault diagnosis under variable speed conditions. Mechanical Systems and Signal Processing, 121:636–654, 2019. doi: 10.1016/j.ymssp.2018.11.049.
[28] D.F. Plöger, P. Zech, and S. Rinderknecht. Vibration signature analysis of commodity planetary gearboxes. Mechanical Systems and Signal Processing, 119:255–265, 2019. doi: 10.1016/j.ymssp.2018.09.014.
[29] G. D’Elia, E. Mucchi, and M. Cocconcelli. On the identification of the angular position of gears for the diagnostics of planetary gearboxes. Mechanical Systems and Signal Processing, 83:305–320, 2017. doi: 10.1016/j.ymssp.2016.06.016.
[30] W. Żurowski, K. Olejarczyk, and R. Zaręba.Wear assessment of sliding sleeves in a single-stage cycloidal drive. Advances in Science and Technology Research Journal, 13(4):239–245, 2019. doi: 10.12913/22998624/114180.
[31] K. Olejarczyk, M. Wikło, K. Kołodziejczyk, R. Król, and K. Król. Theoretical and experimental verification of one stage cycloidal gearbox efficiency. In: T. Uhl (ed.) Advances in Mechanism and Machine Science. Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science, pages 1029–1038, Cracow, Poland, 15-18 July, 2019. doi: 10.1007/978-3-030-20131-9_102.
[32] M. Wikło, K. Olejarczyk, K. Kołodziejczyk, K. Król, and I. Komorska. Experimental vibration test of the cycloidal gearbox with different working conditions. Vibroengineering PROCEDIA, 13:24–27, 2017. doi: 10.21595/vp.2017.19073.
Go to article

Authors and Affiliations

Roman Król
1
ORCID: ORCID

  1. Kazimierz Pulaski University of Technology and Humanities in Radom, Faculty of Mechanical Engineering, Poland.
Download PDF Download RIS Download Bibtex

Abstract

In this article, the frequency characteristics of the forces and torques in the various cycloidal gearbox designs were investigated. The aim of the article is the search for frequency patterns that could be used in the formulation of a fault diagnosis methodology. Numerical analysis was performed in the cycloidal gearbox without defects as well as in cycloidal gearboxes with lobe defects or with removed lobes. The results of the numerical analysis were obtained in the multibody dynamics model of the cycloidal gearbox, implemented in Fortran and using the 2nd-order Runge-Kutta method for the integration of the motion equations. The used model is planar and uses Hunt and Crossley’s nonlinear contact modelling algorithm, which was modified using the Heaviside function and backlash to fit cycloidal gearbox model convergence demands. In the analysis of fault diagnosis methods, the coherence function and Morris minimum-bandwidth wavelets were used. It is difficult to find a unique pattern in the results to use in the fault diagnosis because of the random characteristics of the torques at the input and output shafts. Based on obtained results, a promising, low-vibration cycloidal gearbox design with removed 7 lobes of the single wheel was studied using the FFT algorithm.
Go to article

Bibliography

[1] Y. Fu, X. Chen, Y. Liu, C. Son, and Y. Yang. Gearbox fault diagnosis based on multi-sensor and multi-channel decision-level fusion based on SDP. Applied Sciences, 12(15):7535, 2022. doi: 10.3390/app12157535.
[2] F. Xie, H. Liu, J. Dong, G. Wang, L. Wang, and G. Li. Research on the gearbox fault diagnosis method based on multi-model feature fusion. Machines, 10(12):1186, 2022. doi: 10.3390/machines10121186.
[3] I. Komorska, K. Olejarczyk, A. Puchalski, M. Wikło, and Z. Wołczyński. Fault diagnosing of cycloidal gear reducer using statistical features of vibration signal and multifractal spectra. Sensors, 23(3):1645, 2023. doi: 10.3390/s23031645.
[4] R. Król. Analysis of the backlash in the single stage cycloidal gearbox. Archive of Mechanical Engineering, 69(4):693–711, 2022. doi: 10.24425/ame.2022.141521.
[5] R. Król. Resonance phenomenon in the single stage cycloidal gearbox. Analysis of vibrations at the output shaft as a function of the external sleeves stiffness. Archive of Mechanical Engineering, 68(3):303–320, 2021. doi: 10.24425/ame.2021.137050.
[6] R. Król and K. Król. Multibody dynamics model of the cycloidal gearbox, implemented in Fortran for analysis of dynamic parameters influenced by the backlash as a design tolerance. Acta Mechanica et Automatica, 17(2):272–280, 2023. doi: 10.2478/ama-2023-0031.
[7] R. Król. Cycloidal gearbox model for transient analysis implemented in Fortran with constant time step 2nd order integrator. In: A. Puchalski, B.E. Łazarz, F. Chaari, I. Komorska, Z. Zimroz (eds) Advances in Technical Diagnostics II. ICTD 2022. Applied Condition Monitoring, pp. 63–74, vol. 21. Springer, Cham 2023. doi: 10.1007/978-3-031-31719-4_7.
[8] R. Król. Software for the cycloidal gearbox multibody dynamics analysis, implemented in Fortran. (Purpose: presentation of the results in the scientific article), 2023. doi: 10.5281/ZENODO.7729842.
[9] R. Król. Kinematics and dynamics of the two stage cycloidal gearbox. AUTOBUSY – Technika, Eksploatacja, Systemy Transportowe, . 19(6):523–527, 2018. doi: 10.24136/atest.2018.125.
[10] K.S. Lin, K. Y. Chan, and J. J. Lee. Kinematic error analysis and tolerance allocation of cycloidal gear reducers. Mechanism and Machine Theory, 124:73–91, 2018. doi: 10.1016/j.mechmachtheory.2017.12.028.
[11] L.X. Xu, B.K. Chen, and C.Y. Li. Dynamic modelling and contact analysis of bearing-cycloid-pinwheel transmission mechanisms used in joint rotate vector reducers. Mechanism and Machine Theory, 137:432–458, 2019. doi: 10.1016/j.mechmachtheory.2019.03.035.
[12] Y. Li, K. Feng, X. Liang, and M.J. Zuo. A fault diagnosis method for planetary gearboxes under non-stationary working conditions using improved Vold-Kalman filter and multi-scale sample entropy. Journal of Sound and Vibration, 439:271–286, 2019. doi: 10.1016/j.jsv.2018.09.054.
[13] S. Schmidt, P.S. Heyns, and J.P. de Villiers. A novelty detection diagnostic methodology for gearboxes operating under fluctuating operating conditions using probabilistic techniques. Mechanical Systems and Signal Processing, 100:152–166, 2018. doi: 10.1016/j.ymssp.2017.07.032.
[14] Y. Lei, D. Han, J. Lin, and Z. He. Planetary gearbox fault diagnosis using an adaptive stochastic resonance method. Mechanical Systems and Signal Processing, 38(1):113–124, 2013. doi: 10.1016/j.ymssp.2012.06.021.
[15] Y. Chen, X. Liang, and M. . Zuo. Sparse time series modeling of the baseline vibration from a gearbox under time-varying speed condition. Mechanical Systems and Signal Processing, 134:106342, 2019. doi: 10.1016/j.ymssp.2019.106342.
[16] G. D’Elia, E. Mucchi, and M. Cocconcelli. On the identification of the angular position of gears for the diagnostics of planetary gearboxes. Mechanical Systems and Signal Processing, 83:305–320, 2017. doi: 10.1016/j.ymssp.2016.06.016.
[17] X. Chen and Z. Feng. Time-frequency space vector modulus analysis of motor current for planetary gearbox fault diagnosis under variable speed conditions. Mechanical Systems and Signal Processing, 121:636–654, 2019. doi: 10.1016/j.ymssp.2018.11.049.
[18] S. Schmidt, P.S. Heyns, and K.C. Gryllias. A methodology using the spectral coherence and healthy historical data to perform gearbox fault diagnosis under varying operating conditions. Applied Acoustics, 158:107038, 2020. doi: 10.1016/j.apacoust.2019.107038.
[19] D. Zhang and D. Yu. Multi-fault diagnosis of gearbox based on resonance-based signal sparse decomposition and comb filter. Measurement, 103:361–369, 2017. doi: 10.1016/j.measurement.2017.03.006.
[20] C. Wang, H. Li, J. Ou, R. Hu, S. Hu, and A. Liu. Identification of planetary gearbox weak compound fault based on parallel dual-parameter optimized resonance sparse decomposition and improved MOMEDA. Measurement, 165:108079, 2020. doi: 10.1016/j.measurement.2020.108079.
[21] W. Teng, X. Ding, H. Cheng, C. Han, Y. Liu, and H. Mu. Compound faults diagnosis and analysis for a wind turbine gearbox via a novel vibration model and empirical wavelet transform. Renewable Energy, 136:393–402, 2019. doi: 10.1016/j.renene.2018.12.094.
[22] D. Abboud, S. Baudin, J. Antoni, D. Rémond, M. Eltabach, and O. Sauvage. The spectral analysis of cyclo-non-stationary signals. Mechanical Systems and Signal Processing, 75:280–300, 2016. doi: 10.1016/j.ymssp.2015.09.034.
[23] J.M. Morris and R. Peravali. Minimum-bandwidth discrete-time wavelets, Signal Processing, vol. 76, no. 2, pp. 181–193, 1999. doi: 10.1016/S0165-1684(99)00007-9.
[24] R. Król. Software for the cycloidal gearbox multibody dynamics analysis, implemented in Fortran. (Purpose: presentation of the results in the scientific article), 2022. doi: 10.5281/ZENODO.7221146.
[25] P. Flores and H.M. Lankarani. Contact Force Models for Multibody Dynamics, vol. 226, Springer, 2016. doi: 10.1007/978-3-319-30897-5.
[26] MATLAB documentation, https://www.mathworks.com/help/signal/ref/mscohere.html.
[27] MATLAB documentation, https://www.mathworks.com/help/wavelet/ug/wavelet-families-additional-discussion.html.
[28] X. Shi and A.A. Polycarpou. Measurement and modeling of normal contact stiffness and contact damping at the meso scale. Journal of Vibration and Acoustics, 127(1):52–60, 2005. doi: 10.1115/1.1857920.
Go to article

Authors and Affiliations

Roman Król
1
ORCID: ORCID

  1. Faculty of Mechanical Engineering, Kazimierz Pulaski University of Technology and Humanities in Radom, Poland
Download PDF Download RIS Download Bibtex

Abstract

In the present study, the problem of optimization of the motion mode of the tower crane's slewing mechanism in the steady-state mode of trolley movement is stated and solved. An optimization criterion, which includes the RMS values of the drive torque and the rate of its change over time, is minimized. The optimization is carried out taking into account the drive torque constraints, and under the specified boundary conditions of motion. Three optimization problems at different values of the weight coefficients are solved. In the first problem, priority is given to the drive torque, in the third – to the rate of the drive torque change, and in the second problem, the significance of both components is assumed equal. The optimization problems are nonlinear, thus a VСT-PSO method is applied to solve them. The obtained optimal start-up modes of the crane slewing mechanism eliminate pendulum load oscillations and high-frequency elastic oscillations of the tower. Most of the kinematic, dynamical, and power parameters at different values of the weight coefficients are quite close to each other. It indicates that the optimal modes of motion are significantly influenced by the boundary conditions, optimization parameters, and constraints
Go to article

Bibliography

[1] E.M. Abdel-Rahman, A.H. Nayfeh, and Z.N. Masoud. Dynamics and control of cranes: A review. Journal of Vibration and Control, 9(7):863–908, 2003. doi: 10.1177/1077546303009007007.
[2] S.C. Kang and E. Miranda. Physics based model for simulating the dynamics of tower cranes. In 2004 Proceeding of Xth International Conference on Computing in Civil and Building Engineering (ICCCBE), Weimar, Germany, June 2004. doi: 10.25643/bauhaus-universitaet.240.
[3] T. Kuo, Y-C. Chiang, S-Y. Cheng, and S.-C.J. Kang. Oscillation reduction method for fast crane operation. Modular and Offsite Construction (MOC) Summit Proceedings, pages 388–395, 2015. doi: 10.29173/mocs159.
[4] G. Sun and M. Kleeberger. Dynamic responses of hydraulic mobile crane with consideration of the drive system. Mechanism and Machine Theory. 38(12):1489–1508, 2003. doi: 10.1016/S0094-114X(03)00099-5.
[5] T. Čampara, H. Bukvić, D. Sprečić. Ability to control swinging of payload during the movement of the rotary cranes mechanism. In 4th International Conference on Intelligent Technologies in Logistics and Mechatronics Systems. Kaunas University of Technology Panevezys Institute, pages 52–55, Kaunas. Lithuania, 2009.
[6] V. Loveikin, Yu. Romasevych, A. Loveikin, and M. Korobko. Optimization of the trolley mechanism acceleration during tower crane steady slewing. Archive of Mechanical Engineering, 69(3):411–429, 2022. doi: 10.24425/ame.2022.140424.
[7] I.G. Carmona and J. Colado. Control of a two wired hammerhead tower crane. Nonlinear Dynamics, 84(4):2137–2148, 2016. doi: doi.org/10.1109/AIM.2016.7576860">10.1109/AIM.2016.7576860.
[9] R.P. Gerasymyak and V.A. Leshchev. Analysis and Synthesis of Crane Electromechanical Systems. 2008. (in Russian).
[10] R.P. Gerasymyak and O.V. Naidenko. Features of the control of the electric drive of the boom departure mechanism during the rotation of the crane with a suspended load. Electrical Engineering and Electrical Equipment, 68:11–15, 2007. (in Ukrainian).
[11] Naidenko E.V. Electric drive control of horizontal movement mechanisms with a suspended load. Electric Machine Building and Electric Control, 69:17–22, 2007.
[12] M. Čolić, N. Pervan, M. Delić, A.J. Muminović, S. Odžak, and V. Hadžiabdić. Mathematical modelling of bridge crane dynamics for the time of non-stationary regimes of working hoist mechanism. Archive of Mechanical Engineering, 69(2):189–202, 2022. doi: 10.24425/ame.2022.140415.
[13] S. Chwastek. Optimization of crane mechanism to reduce vibration. Automation in Construction, 119:103335, 2020. doi: 10.1016/j.autcon.2020.103335.
[14] V. Loveikin, Yu. Romasevych, A. Loveikin, A. Lyashko,and M. Korobko. Minimization of high frequency oscillations of trolley movement mechanism during steady tower crane slewing. UPB Scientific Bulletin, Series D: Mechanical Engineering, 84(1):31-44, 2022.
[15] Z. Liu, T. Yang, N. Sun, and Y. Fang. An antiswing trajectory planning method with state constraints for 4-DOF tower cranes: Design and experiments. IEEE Access, 7: 62142–62151, 2019. doi: 10.1109/ACCESS.2019.2915999.
[16] T.K. Nguyen. Combination of feedback control and spring-damper to reduce the vibration of crane payload. Archive of Mechanical Engineering, 68(2):165–181, 2021. doi: 10.24425/ame.2021.137046.
[17] G. Rigatos, M. Abbaszadeh, and J. Pomares. Nonlinear optimal control for the 4-DOF underactuated robotic tower crane. Autonomous Intelligent Systems, 2:21, 2022. doi: 10.1007/s43684-022-00040-4.
[18] A. Al-Fadhli and E. Khorshid. Payload oscillation control of tower crane using smooth command input. Journal of Vibration and Control, 29(3-4):902–915. 2023. doi: 10.1177/10775463211054640.
[19] S.-J. Kimmerle, M. Gerdts, and R. Herzog. An optimal control problem for a rotating elastic crane-trolley-load system. IFAC-PapersOnLine, 51(2):272-277, 2018, doi: 10.1016/j.ifacol.2018.03.047.
[20] Y. Romasevych, V. Loveikin, and Y. Loveikin. Development of a PSO modification with varying cognitive term. 2022 IEEE 3rd KhPI Week on Advanced Technology, KhPI Week 2022 – Conference Proceedings, Kharkiv, Ukraine, 2022. doi: 10.1109/KhPIWeek57572.2022.9916413.
Go to article

Authors and Affiliations

Viacheslav Loveikin
1
ORCID: ORCID
Yuriy Romasevych
1
ORCID: ORCID
Andrii Loveilin
2
ORCID: ORCID
Mykola Korobko
1
ORCID: ORCID
Anastasia Liashko
1
ORCID: ORCID

  1. National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine
  2. Taras Shevchenko National University of Kyiv, Ukraine
Download PDF Download RIS Download Bibtex

Abstract

The presented problem consists in optimizing the pulling force of the luffing jib tower cranes, in order to reduce power and save energy by determining reasonable geometrical parameters such as placement of pulley assemblies, position of jib pin, and jib length. To determine the optimal parameters, a mechanical model was developed to calculate the pulling force of the research object. Then, the Taguchi method and Minitab software were applied to evaluate the influence of the parameters. The objective function was the minimum pulling force of the luffing jib. The calculation results show that the position of the pulley assembly used to pull the jib is the most influential factor on the objective function accounting for 81.15%, the less significant factors are the jib length, the pin position of the jib, and the pulley assembly that changes the direction of the load lifting cable. The result of the test presented in the article allowed for determining the rational parameters, and the optimal position of the pulley assemblies on the top of the crane. In the case of the pulley assembly located at the top of the crane, one obtains the optimal height of the crane head H≈0.4 L c.
Go to article

Bibliography

[1] H. Hyun, M. Park, D. Lee, and J.Lee. Tower crane location optimization for heavy unit lifting in high-rise modular construction. Buildings, 11(3):121, 2021. doi: 10.3390/buildings11030121.
[2] T.G. Duong. Research on fundamental calculation of tower cranes examining into the elastic deflections of tower bod. Journal of Science and Technology in Civil Engineering, 11(4):139–144, 2017. https://stce.huce.edu.vn/index.php/vn/article/view/652.
[3] T.G. Duong. Selecting control method of hydraulic resistances in hydraulic system for tower crane climbing mechanism. Journal of Science and Technology in Civil Engineering,14(3V):140–148, 2020. doi: 10.31814/stce.nuce2020-14(3V)-13.
[4] B. Li, L. Lei, and B. Liu. Research of tower crane suspended climb supporting system. Applied Mechanics and Materials, 130-134:1889–1893, 2012. doi: 10.4028/www.scientific.net/AMM.130-134.1889.
[5] S. Chwastek. Optimization of crane mechanisms to reduce vibration. Automation in Construction, 119:103335, 2020. doi: 10.1016/j.autcon.2020.103335.
[6] S. Chwastek. Finding the globally optimal correlation of cranes drive mechanisms. Mechanics Based Design of Structures and Machines, 51(6):3230–3241, 2023. doi: 10.1080/15397734.2021.1920978.
[7] Y. Xue, M.S. Ji, N. Wu, Y. Xue, and W. Wang. The dimensionless-parameter robust optimization method based on geometric approach of pulley block compensation in luffing mechanism. In: Proceedings of the 2015 International Conference of Electrical, Automation and Mechanical Engineering, pages 157–160, Atlantis Press 2015. doi: 10.2991/eame-15.2015.43.
[8] X. Li. Truss structure optimum design and its engineering application. Computers \amp; Structures, 36(3): 567–573, 1990. doi: 10.1016/0045-7949(90)90291-9.
[9] R. Šelmić, P. Cvetković, R. Mijailović, and G. Kastratović. Optimum dimensions of triangular cross-section in lattice structures. Meccanica, 41:391–406, 2006. doi: 10.1007/s11012-005-5337-2.
[10] R. Mijailović and G. Kastratović. Cross-section optimization of tower crane lattice boom. Meccanica, 44:599–611,2009. doi: 10.1007/s11012-009-9204-4.
[11] J. Wang, L. Li, and L. Hao. APDL-based optimization of the boom of luffing jib tower cranes. Advanced Materials Research, 291-294:2566–2573, 2011. doi: 10.4028/www.scientific.net/AMR.291-294.2566.
[12] Q. Wu, Q. Zhou, X. Xiong and R. Zhang. Periodic topology and size optimization design of tower crane boom. International Scholarly and Scientific Research \amp; Innovation, 11(8), 2017. doi: 10.5281/zenodo.1131629.
[13] X-L. Cheng, H-L. Yang, and B. Zhu. Structure lightweight design of luffing jib tower crane jib. Machine Tool \amp; Hydraulics, 46(18): 81–86,99, 2018. doi: href="https://doi.org/10.3969/j.issn.1001-3881.2018.18.012">10.3969/j.issn.1001-3881.2018.18.012.
[14] D.S. Kim and J. Lee. Structural design of a level-luffing crane through trajectory optimization and strength-based size optimization. Structural and Multidisciplinary Optimization, 51: 515–531, 2015. doi: 10.1007/s00158-014-1139-2.
[15] Q. Jiao, Y. Qin, Y. Han, and J. Gu. Modeling and optimization of pulling point position of luffing jib on portal crane. Mathematical Problems in Engineering, 2021: 4627257, 2021. doi: 10.1155/2021/4627257.
[16] FEM 1.001: Rules for the Design of Hoisting Appliances (3rd Edition Revised 1998.10.01).
[17] R.V. Rao and V.J. Savsani. Mechanical Design Optimization Using Advanced Optimization Techniques. Springer, 2012.
[18] A. Arunkumar, S. Ramabalan, and D. Elayaraja. Optimum design of stair-climbing robots using Taguchi method. Intelligent Automation\amp; Soft Computing, 35(1):1229–1244, 2023. doi: 10.32604/iasc.2023.027388.
[19] M. Milos, I. Lozica, P. Nenad, and K. Nenad. Determination of the most influential factor during the rope winding process around winch drums using Taguchi method. 8th Iinternational Conference on Tribology, pages 794-798, 2014, Sinaia, Romania.
[20] P.J. Gamez-Montero, and E. Bernat-Maso. Taguchi techniques as an effective simulation-based strategy in the design of numerical simulations to assess contact stress in gerotor pumps. Energies, 15(19):7138, 2022. doi: 10.3390/en15197138.
[21] D-C. Chen, C-S. You, F-L. Nian, and M-W. Guo. Using the Taguchi method and finite element method to analyze a robust new design for titanium alloy prick hole extrusion, Procedia Engineering, 10:82–87, 2011. doi: 10.1016/j.proeng.2011.04.016.
[22] H-J. Chen, H-C. Lin, C-W .Tang. Application of the Taguchi method for optimizing the process parameters of producing controlled low-strength materials by using dimension stone sludge and lightweight aggregates. Sustainability, 13(10):5576, 2021. doi: 10.3390/su13105576.
[23] R. Barea, S. Novoa, F. Herrera, B. Achiaga, and N. Candela. A geometrical robust design using the Taguchi method: application to a fatigue analysis of a right angle bracket. DYNA, 85(205):37–46, 2018. doi: 10.15446/dyna.v85n205.67547.
[24] T. G. Duong. Instructions Manual for Calculating the Lifting Machine. Construction Publisher, Hanoi, Vietnam, 2019.
Go to article

Authors and Affiliations

Truong Giang Duong
1
ORCID: ORCID

  1. Faculty of Mechanical Engineering, Hanoi University of Civil Engineering, Hanoi, Vietnam
Download PDF Download RIS Download Bibtex

Abstract

Thermally induced free vibration of sandwich beams with porous functionally graded material core embedded between two isotropic face sheets is investigated in this paper. The core, in which the porosity phase is evenly or unevenly distributed, has mechanical properties varying continuously along with the thickness according to the power-law distribution. Effects of shear deformation on the vibration behavior are taken into account based on both third-order and quasi-3D beam theories. Three typical temperature distributions, which are uniform, linear, and nonlinear temperature rises, are supposed. A mesh-free approach based on point interpolation technique and polynomial basis is utilized to solve the governing equations of motion. Examples for specific cases are given, and their results are compared with predictions available in the literature to validate the approach. Comprehensive studies are carried out to examine the effects of the beam theories, porosity distributions, porosity volume fraction, temperature rises, temperature change, span-to-height ratio, different boundary conditions, layer thickness ratio, volume fraction index on the vibration characteristics of the beam.
Go to article

Bibliography

[1] D.K. Jha, T. Kant, and R.K. Singh. A critical review of recent research on functionally graded plates. Composite Structures, 96:833–849, 2013. doi: 10.1016/j.compstruct.2012.09.001.
[2] A.S. Sayyad and Y.M. Ghugal. Modeling and analysis of functionally graded sandwich beams: a review. Mechanics of Advanced Materials and Structures, 26(21):1776–1795, 2019. doi: 10.1080/15376494.2018.1447178.
[3] A. Paul and D. Das. Non-linear thermal post-buckling analysis of FGM Timoshenko beam under non-uniform temperature rise across thickness. Engineering Science Technology, an International Journal, 19(3):1608–1625, 2016. doi: 10.1016/j.jestch.2016.05.014.
[4] A. Fallah and M.M. Aghdam. Thermo-mechanical buckling and nonlinear free vibration analysis of functionally graded beams on nonlinear elastic foundation. Composites Part B: Engineering, 43 (3):1523–1530, 2012. doi: 10.1016/j.compositesb.2011.08.041.
[5] A.I. Aria and M.I. Friswell. Computational hygro-thermal vibration and buckling analysis of functionally graded sandwich microbeams. Composites Part B: Engineering, 165:785–797, 2019. doi: 10.1016/j.compositesb.2019.02.028.
[6] S.E. Esfahani, Y. Kiani, and M.R. Eslami. Non-linear thermal stability analysis of temperature dependent FGM beams supported on non-linear hardening elastic foundations. International Journal of Mechanical Sciences, 69:10–20, 2013. doi: 10.1016/j.ijmecsci.2013.01.007.
[7] M. Lezgy-Nazargah. Fully coupled thermo-mechanical analysis of bi-directional FGM beams using NURBS isogeometric finite element approach. Aerospace Science and Technology, 45:154–164, 2015. doi: 10.1016/j.ast.2015.05.006.
[8] L.C. Trinh, T.P. Vo, H.-T. Thai, and T.-K. Nguyen. An analytical method for the vibration and buckling of functionally graded beams under mechanical and thermal loads. Composites Part B: Engineering, 100:152–163, 2016. doi: 10.1016/j.compositesb.2016.06.067.
[9] T.-K. Nguyen, B.-D. Nguyen, T.P. Vo, and H.-T. Thai. Hygro-thermal effects on vibration and thermal buckling behaviours of functionally graded beams. Composite Structures, 176:1050–1060, 2017. doi: 10.1016/j.compstruct.2017.06.036.
[10] P. Malekzadeh and S. Monajjemzadeh. Dynamic response of functionally graded beams in a thermal environment under a moving load. Mechanics of Advanced Materials and Structures, 23(3):248– 258, 2016. doi: 10.1080/15376494.2014.949930.
[11] N. Wattanasakulpong, B. Gangadhara Prusty, and D.W. Kelly. Thermal buckling and elastic vibration of third-order shear deformable functionally graded beams. International Journal of Mechanical Sciences, 53(9):734–743, 2011. doi: 10.1016/j.ijmecsci.2011.06.005.
[12] S.C. Pradhan and T. Murmu. Thermo-mechanical vibration of FGM sandwich beam under variable elastic foundations using differential quadrature method. Journal of Sound and Vibration, 321(1- 2):342–362, 2009. doi: 10.1016/j.jsv.2008.09.018.
[13] G.-L. She, F.-G. Yuan, and Y.-R. Ren. Thermal buckling and post-buckling analysis of functionally graded beams based on a general higher-order shear deformation theory. Applied Mathematical Modelling, 47:340–357, 2017. doi: 10.1016/j.apm.2017.03.014.
[14] H.-S. Shen and Z.-X. Wang. Nonlinear analysis of shear deformable FGM beams resting on elastic foundations in thermal environments. International Journal of Mechanical Sciences, 81:195–206, 2014. doi: 10.1016/j.ijmecsci.2014.02.020.
[15] T.T. Tran, N.H. Nguyen, T.V. Do, P.V. Minh, and N.D. Duc. Bending and thermal buckling of unsymmetric functionally graded sandwich beams in high-temperature environment based on a new third-order shear deformation theory. Journal of Sandwich Structures & Materials, 23(3):906–930, 2021. doi: 10.1177/1099636219849268.
[16] A.R. Setoodeh, M. Ghorbanzadeh, and P. Malekzadeh. A two-dimensional free vibration analysis of functionally graded sandwich beams under thermal environment. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226(12):2860–2873, 2012. doi: 10.1177/0954406212440669.
[17] L. Chu, G. Dui, and Y. Zheng. Thermally induced nonlinear dynamic analysis of temperature-dependent functionally graded flexoelectric nanobeams based on nonlocal simplified strain gradient elasticity theory. European Journal of Mechanics - A/Solids, 82:103999, 2020. doi: 10.1016/j.euromechsol.2020.103999.
[18] Y. Fu, J. Wang, and Y. Mao. Nonlinear analysis of buckling, free vibration and dynamic stability for the piezoelectric functionally graded beams in thermal environment. Applied Mathematical Modelling, 36(9):4324–4340, 2012. doi: 10.1016/j.apm.2011.11.059.
[19] W.-R. Chen, C.-S. Chen, and H. Chang. Thermal buckling analysis of functionally graded Euler-Bernoulli beams with temperature-dependent properties. Journal of Applied and Computational Mechanics, 6(3):457–470, 2020. doi: 10.22055/JACM.2019.30449.1734.
[20] N. Wattanasakulpong and V. Ungbhakorn. Linear and nonlinear vibration analysis of elastically restrained ends FGM beams with porosities. Aerospace Science and Technology, 32(1):111–120, 2014. doi: 10.1016/j.ast.2013.12.002.
[21] N. Wattanasakulpong and A. Chaikittiratana. Flexural vibration of imperfect functionally graded beams based on Timoshenko beam theory: Chebyshev collocation method. Meccanica, 50(5):1331– 1342, 2015. doi: 10.1007/s11012-014-0094-8.
[22] D. Shahsavari, M. Shahsavari, L. Li, and B. Karami. A novel quasi-3D hyperbolic theory for free vibration of FG plates with porosities resting on Winkler/Pasternak/Kerr foundation. Aerospace Science and Technology, 72:134–149, 2018. doi: 0.1016/j.ast.2017.11.004.
[23] Z. Ibnorachid, L. Boutahar, K. EL Bikri, and R. Benamar. Buckling temperature and natural frequencies of thick porous functionally graded beams resting on elastic foundation in a thermal environment. Advances in Acoustics and Vibration, 2019:7986569, 2019. doi: 10.1155/2019/7986569.
[24] Ş.D. Akbaş. Thermal effects on the vibration of functionally graded deep beams with porosity. International Journal of Applied Mechanics, 9(5):1750076, 2017. doi: 10.1142/ S1758825117500764.
[25] H. Babaei, M.R. Eslami, and A.R. Khorshidvand. Thermal buckling and postbuckling responses of geometrically imperfect FG porous beams based on physical neutral plane. Journal of Thermal Stresses, 43(1):109–131, 2020. doi: 10.1080/01495739.2019.1660600.
[26] F. Ebrahimi and A. Jafari. A higher-order thermomechanical vibration analysis of temperature-dependent FGM beams with porosities. Journal of Engineering, 2016:9561504, 2016. doi: 10.1155/2016/9561504.
[27] Y. Liu, S. Su, H. Huang, and Y. Liang. Thermal-mechanical coupling buckling analysis of porous functionally graded sandwich beams based on physical neutral plane. Composites Part B: Engineering, 168:236–242, 2019. doi: 10.1016/j.compositesb.2018.12.063.
[28] S.S. Mirjavadi, A. Matin, N. Shafiei, S. Rabby, and B. Mohasel Afshari. Thermal buckling behavior of two-dimensional imperfect functionally graded microscale-tapered porous beam. Journal of Thermal Stresses, 40(10):1201–1214, 2017. doi: 0.1080/01495739.2017.1332962.
[29] E. Salari, S.A. Sadough Vanini, A.R. Ashoori, and A.H. Akbarzadeh. Nonlinear thermal behavior of shear deformable FG porous nanobeams with geometrical imperfection: Snap-through and postbuckling analysis. International Journal of Mechanical Sciences, 178:105615, 2020. doi: 10.1016/j.ijmecsci.2020.105615.
[30] N. Ziane, S.A. Meftah, G. Ruta, and A. Tounsi. Thermal effects on the instabilities of porous FGM box beams. Engineering Structures, 134:150–158, 2017. doi: 10.1016/j.engstruct. 2016.12.039.
[31] A.I. Aria, T. Rabczuk, and M.I. Friswell. A finite element model for the thermo-elastic analysis of functionally graded porous nanobeams. European Journal of Mechanics - A/Solids, 77:103767, 2019. doi: 10.1016/j.euromechsol.2019.04.002.
[32] G.R. Liu and Y.T. Gu. A point interpolation method for two-dimensional solids. International Journal for Numerical Methods in Engineering, 50(4):937–951, 2001. doi: 10.1002/1097-0207(20010210)50:4937::AID-NME62>3.0.CO;2-X.
[33] Y.T. Gu and G.R. Liu. A local point interpolation method for static and dynamic analysis of thin beams. Computer Methods in Applied Mechanics and Engineering, 190(42):5515–5528, 2001. doi: 10.1016/S0045-7825(01)00180-3.
[34] T.H. Chinh, T.M. Tu, D.M. Duc, and T.Q. Hung. Static flexural analysis of sandwich beam with functionally graded face sheets and porous core via point interpolation meshfree method based on polynomial basic function. Archive of Applied Mechanics, 91:933–947, 2021. doi: 10.1007/s00419-020-01797-x.
[35] J.N. Reddy and C.D. Chin. Thermomechanical analysis of functionally graded cylinders and plates. Journal of Thermal Stresses, 21(6):593–626, 1998. doi: 10.1080/01495739808956165.
[36] H.-S. Shen. Functionally Graded Materials: Nonlinear Analysis of Plates and Shells. CRC Press, 2016. doi: 10.1201/9781420092578.
[37] T.-K. Nguyen, T.P. Vo, B.-D. Nguyen, and J. Lee. An analytical solution for buckling and vibration analysis of functionally graded sandwich beams using a quasi-3D shear deformation theory. Composite Structures, 156:238–252, 2016. doi: 10.1016/j.compstruct.2015.11.074.
[38] M. Şimşek. Fundamental frequency analysis of functionally graded beams by using different higher-order beam theories. Nuclear Engineering and Design, 240(4):697–705, 2010. doi: 10.1016/j.nucengdes.2009.12.013.
[39] J.N. Reddy. Mechanics of Laminated Composite Plates and Shells: Theory and Analysis. 2nd ed. CRC Press, 2003.
[40] G.R. Liu. Meshfree Methods: Moving Beyond the Finite Element Method. 2nd ed. Taylor & Francis, 2009. doi: 10.1201/9781420082104.
[41] G.R. Liu, Y.T. Gu, and K.Y. Dai. Assessment and applications of point interpolation methods for computational mechanics. International Journal for Numerical Methods in Engineering, 59(10):1373– 1397, 2004. doi: 10.1002/nme.925.
[42] T.P. Vo, H.-T. Thai, T.-K. Nguyen, F. Inam, and J. Lee. A quasi-3D theory for vibration and buckling of functionally graded sandwich beams. Composite Structures, 119:1–12, 2015. doi: 10.1016/j.compstruct.2014.08.006.
Go to article

Authors and Affiliations

Tran Quang Hung
1
Tran Minh Tu
2
ORCID: ORCID
Do Minh Duc
1

  1. Faculty of Civil Engineering, The University of Da Nang - University of Science and Technology, Da Nang, Vietnam
  2. Hanoi University of Civil Engineering, Hanoi, Vietnam

This page uses 'cookies'. Learn more