To guarantee a durable pavement construction that only needs a little care, it is crucial to manage problematic soil conditions properly and prepare the foundation. Some organizations remove soils since they have realized they do not function as well as other materials (for example, a state specification dictating that frost susceptible loess could not be present in the frost penetration zone). Nevertheless, there are more advantageous or desirable courses of action than this (e.g., excavation might create a disturbance, plus additional issues of disposal and removal). The subgrade conditions described in the preceding section may be improved by stabilization, offering an alternative solution. It is impossible to overstate the importance of ensuring a homogeneous soil profile in terms of density, moisture content, and textural categorization in the top section of the subgrade. Thru soil sub-cutting or other stabilizing methods, this consistency may be attained. Additionally, stabilization may be utilized to prevent swelling in expansive materials, create a weather-resistant work platform, enhance soil workability, and limit issues with frost heave. Alternative stabilizing techniques will be discussed in this part, and advice for choosing the best technique will be adequately provided. The current review paper aims to identify bridge issues related to soft soil and takes two ways of soft soil stabilization: chemical and mechanical. The finding of both methods show that the compressive strength and settlement have been improved after using waste materials; therefore, using waste materials as a cement replacement is considered one of the expansive utilized methods in most construction applications and bridges of that applications.

An enormous number of structures and roads are put on expansive subgrade soils and may be exposed to the swelling and shrinkage risk. To prevent the expanding weight of the subgrade layer under loaded pavement, one of the following strategies may be utilized are geogrid layer. Reinforced pavement layers have been propagated in the field of civil engineering because of their profoundly adaptable and diversified use. In this study, axisymmetric models of pavement layers have been created by 2-D Plaxis software and all of these models included geogrid layers at various positions concentrated to research the impact of geogrid on the critical pavement responses. Geogrid was placed at the bottom of asphalt layer, bottom of base layer, tope and middle of the subgrade layer. All models are loaded with incremental contact pressure between 50 and 600 kPa. Analysis processes have been made for all models and the obtained investigation results show a significant effect on pavement behavior when the a geogrid layer was used under various tire pressures. Also, there is an increase in the bearing capacity of a model that includes geogrid at the top and middle of the subgrade layer by about 35% and the resistance of the asphalt layer to deformation and cracking failure was improved.

In the case analysed, a glass fibre mesh was applied under the asphalt layer during a rehabilitation treatment. Because only one lane was reinforced, the test section can be used to observe the influence of glass fibre mesh on the relationship between the selected deflection basin parameters (RoC, BLI, MLI, and LLI) and back-calculated pavement layer moduli. The FWD measures were used to determine the bowl of deflection indicators and to back-calculate the layer’s moduli. The values of DBP-s allowed confirmation of the technical condition of pavement construction. The first measures were carried out in 2019 and repeated in 2021; the results were then compared and analysed. Influence was observed on the relationship between the deflection basin and moduli, especially for the base course and subgrade. The reinforced lane showed a better coefficient of determination between DBPs and moduli in 2019, but in 2021 relationships were observed only for LLI and subgrade moduli. The unreinforced lane, however, showed the mentioned relationships in both 2019 and 2021. Because of a relatively small number of measurement points, the presented analyses and observations should be considered as preliminary. Presented results and relationships are another step into developing an alternative approach to determining the initial pavement moduli i.e. to use as a seed moduli.

The article presents a new approach to testing the strength of asphalt interlayer bonding. Two loading methods were used: static load and cyclic load. Before carrying out static shear strength tests, the interlayer bonding was subjected to cyclic loads with a constant number of cycles but with different frequencies. A number of layered samples with and without geosynthetic interlayers were tested at the set temperature. The comparative analyses allowed to determine the functions approximating the impact of the cyclic load frequency on the static strength of bonding at selected interlayer contact conditions. It was also possible to indicate the frequency of cyclic load at which this parameter has the largest and smallest impact on the static strength of the asphalt interlayer bonding.

Natural airfield pavements divide into soil and turf pavements. Turf pavement is a soil pavement covered with a developed grass layer that reduce soil moisture level, thus increasing its' resistance and extending exploitation period. Natural airfield pavements are formed through appropriate ground preparation. This pavement should be constructed in such a way as to have sufficient load-bearing capacity, which directly affects the safety of flight operations by aircraft. The current research indicates that a significant part of natural airfield pavements in Poland does not meet the requirements for load bearing capacity and require reinforcing. The article provides an example of reinforcing the natural airfield pavement with a system of geogrids. The paper describes what research was performed in order to measure the load-bearing capacity of natural airfield pavements and analyses the obtained results.