This study presents a customized root cause analysis approach to investigate the reasons,
provide improvements measures for the cost overruns, and schedule slippage in papermachine-
building projects. The proposed approach is an analytical-survey approach that
uses both actual technical data and experts’ opinions. Various analysis tools are embedded
in the approach including: data collection and clustering, interviews with experts, 5-Whys,
Pareto charts, cause and effect diagram, and critical ratio control charts. The approach was
implemented on seven projects obtained from a leading international paper machine supplier.
As a result, it was found that the main causes behind cost and schedule deviations
are products’ related; including technical accidents in the Press section, damaged parts, design
issues, optimization of the machine and missing parts. Based on the results, prevention
measures were perceived.
Mineral fillers are mainly utilized in the production of printing and writing papers (P&W) to improve their optical features and their vulnerability to printing. With the high cost of pulp, the aim of their introduction has been to increase mineral loading in paper and reduce the overall cost of production. For many years the only method of paper formation was acid technology, while the only raw material of choice for filling and coating paper and cardboard was kaolin (in the beginning of the 1970s it was 80% of fillers and 94% of coating grades used in Western Europe, while in the USA – 92% and 96%, respectively). The onset on new methods of acid-free (alkaline) paper forming caused a drastic reduction in the kaolin demand for cost-competitive calcium carbonate: GCC – Ground Calcium Carbonate) and PCC – Precipitated Calcium Carbonate. This also resulted from the progressive self-destruction of machine-made acid papers. In 2013, the share of calcium carbonate in the total production of fillers was 83%, while kaolin accounted for 10%, and talc – 7%. The article presents the parameters of principal mineral fillers for the paper industry and the main reasons why they are suitable for particular kinds of paper. Kaolin, due to the platy nature of its main mineral constituent – kaolinite, is preferred in multiple coating papers. The choice of GCC is beneficial because of its low price and properties (especially whiteness). PCC , due to the possibility of shape and particle size modification serves as filler in uncoated woodfree papers, the key features of which are expected to be lightness and opacity. Size distribution is the main difference between PCC and GCC . The article also presents tendencies observed over the last several years in the paper market in Poland, i.e. in a significant growth in coated paper and board for packaging, as well as the decreasing demand for newspaper, which is a consequence of progressive digitalization.
The effects of different volumetric ratios of bulking agents to pulp/paper-mill sludge on composting were studied. Rice husk and corncob were used as bulking agents. Volumetric ratios of bulking agents to pulp/paper-mill sludge were used as 10:100 and 25:100. To monitor the evolution of the composting systems, routine parameters such as temperature, moisture, pH, total N, NH4 +-N, NO3 --N, total C, and C/N ratio were analyzed. The results indicated that the agro-based materials significantly affected compost maturity parameters. Moreover, the quality of the product obtained in the composting process treated with the agro-based materials achieved satisfactory stabilization and sanitation for application to land.
The study was conducted at the University of Nebraska Pesticide Application and Technology Laboratory in North Platte, Nebraska in July 2015. Two application volume rates (100 and 200 l · ha−1) and three nozzle types (XR, AIXR, TTI) were selected at two flow rates (0.8 and 1.6 l · min−1) and at a single application speed of 7.7 km · h−1. Each collector type [Mylar washed (MW), Mylar image analysis (MIA), water-sensitive paper (WSP), and Kromekote (KK)] was arranged in a randomized complete block design. Each nozzle treatment was replicated twice, providing six cards of each collector type for each nozzle treatment. A water + 0.4% v/v Rhodamine WT spray solution was applied, given the fluorescent and visible qualities of Rhodamine, which allows it to be applied over all the collector types. MW had the highest coverage at 18.3% across nozzle type, followed by WSP at 18%, KK at 12% and lastly by MIA at 4%. MW resulted in a 58% increase in coverage, WSP in a 56% increase, and KK only an increase of 39% when the volume rate was doubled from 100 l · ha−1 to 200 l · ha−1 across nozzle type. MW coverage was similar to KK for half of the nozzles (XR 11002, XR 11004, AIXR 11002). Droplet number density fixed effects were all significant for nozzle type and collector type (p < 0.001) as was the interaction of nozzle type and collector type (p < 0.001). Results from this study suggest a strong correlation to data produced with WSP and MW collectors, as there was full agreement between both types except for the TTI 11004. Using both collector types in the same study would allow for a visual understanding of the distribution of the spray, while also giving an idea of the concentration of that distribution.
The aim of this study is to examine the importance of the decision in Engelhart CTP (US) LLC v Lloyd’s Syndicate 1221 with regard to the insurance of economic losses and non-existent goods in the context of all-risks cover. It also strives to analyse to what extent the principles of construction described in this decision are applicable to the interpretation of all risks cover in marine insurance disputes subject to Polish law. Assureds and beneficiaries of cargo policies are defrauded into taking up false documents for non-existent goods yet Polish law fails to address the questions which arise in such situations. It is thus important not only to investigate and evaluate the answers provided by English law but also to explore if and how Polish law may employ them. It follows from this study that Engelhart may be used in construction of all-risks policies subject to Polish law in most scenarios.