[1] Liu, Q.,Wang, Z. D., & Perrot, F. (2009). Impulse breakdown voltages of ester-based transformer oils determined by using different test methods. IEEE Conference on Electrical Insulation and Dielectric Phenomena, 608–612.
https://doi.org/10.1109/CEIDP.2009.5377741 [2] Rozga, P. (2016). Streamer propagation in a non-uniform electric field under lightning impulse in short gaps insulated with natural ester and mineral oil. Bulletin of the Polish Academy of Sciences: Technical Science, 64(1), 171–179.
https://doi.org/10.1515/bpasts-2016-0019 [3] Rozga, P. (2016). Using the three-parameter Weibull distribution in assessment of threshold strength of pressboard impregnated by different liquid dielectrics. IET Science, Measurement & Technology, 10(6), 665–670.
https://doi.org/10.1049/iet-smt.2016.0061 [4] Aniserowicz, K. (2019). Analytical calculations of surges caused by direct lightning strike to underground intrusion detection system. Bulletin of the Polish Academy of Sciences: Technical Science, 67(2), 263–269.
https://doi.org/10.24425/bpas.2019.128118 [5] Mosinski, F. (1995). Metody statystyczne w technice wysokich napięć. Wydawnictwo Politechniki Łódzkiej. (in Polish)
[6] Vibholm, S., & Thyregod, P. (1988). A study of the up-and-down method for non-normal distribution functions. IEEE Transactions on Electrical Insulation, 23(3), 357–364.
https://doi.org/10.1109/14.2375 [7] Rozga, P. (2019). Lightning strength of gas, liquid and solid insulation – experience formthe laboratory tests. The International Conference on Power Transformers “Transformer’19”, 199–212.
[8] Khaled, U., & Beroual, A. (2020). Lightning impulse breakdown voltage of synthetic and natural ester liquids-based Fe3O4, Al2O3 and SiO2 nanofluids. Alexandria Engineering Journal, 59(5), 3709–3713.
https://doi.org/10.1016/j.aej.2020.06.025 [9] Zhang, Q., You, H., Guo, C., Qin, Y., Ma, J., &Wen, T. (2016) Experimental research of dispersion of SF6 discharge breakdown voltage under lighting impulse. High Voltage Engineering, 42(11), 3415– 3420.
[10] Zhang, Y., Xie, S., Jiang, X., Ye, L., Zhang, Ch., Sun, P., Mu, Z., & Sima, W. (2019). Study on consistency of failure probability characteristics of oil-paper insulation under different impulse voltages. Proceedings of the 21st International Symposium on High Voltage Engineering, 1192–1206.
https://doi.org/10.1007/978-3-030-31676-1_111 [11] Cousineau, D. (2009). Fitting the three-parameter Weibull distribution: review and evaluation of existing and new methods. IEEE Transactions on Dielectrics and Electrical Insulation, 16(1), 281– 288.
https://doi.org/10.1109/TDEI.2009.4784578 [12] European Standards. (2014). Electric strength of insulating materials – Test methods – Part 3: Additional requirements for 1,2/50 μs impulse tests (IEC 60243-3: 2014).
[13] Witos, F., Opilski, Z., Szerszen, G., & Setkiewicz, M. (2019). The 8AE-PD computer measurement system for registration and analysis of acoustic emission signals generated by partial discharges in oil power transformers. Metrology and Measurement Systems, 26(2), 403–418.
https://doi.org/10.24425/mms.2019.128355 [14] Shen, Z., Wang, F., Wang, Z., Li, J. (2021). A critical review of plant-based insulating fluids for transformer: 30 years of development. Renewable and Sustainable Energy Reviews, 41, 110783.
https://doi.org/10.1016/j.rser.2021.110783 [15] Liu, Q., & Wang, Z. D. (2013) Breakdown and withstand strengths of ester transformer liquids in a quasi-uniform field under impulse voltages. IEEE Transactions on Dielectrics and Electrical Insulation, 20(2), 571–579.
https://doi.org/10.1109/TDEI.2013.6508761 [16] Mohan Rao, U., Fofana, I., Beroual, A., Rozga, P., Pompili, M., Calcara, L., & Rapp, K. J. (2020). A review on pre-breakdown phenomena in ester fluids: Prepared by the international study group of IEEE DEIS liquid dielectrics technical committee. IEEE Transactions on Dielectrics and Electrical Insulation, 27(5), 1546–1560.
https://doi.org/10.1109/TDEI.2020.008765 [17] Dixon,W. J. (1965). The Up-and-Down method for small samples. Journal of the American Statistical Association, 60, 967–978.
[18] Malska,W., & Mazur, D. (2017). Analiza wpływu prędkosci wiatru na generację mocy na przykładzie farmy wiatrowej. Przegląd Elektrotechniczny, 93(4), 54–57
https://doi.org/10.15199/48.2017.04.14 [19] Kalbfleisch, J. D., & Prentice, R. L. (2002). The statistical analysis of failure time data (2nd ed.). J. Wiley.
https://doi.org/10.1002/9781118032985 [20] De Haan, L., & Ferreira, A. (2007). Extreme value theory: an introduction. Springer Science & Business Media.
https://doi.org/10.1007/0-387-34471-3 [21] Chmura, L., Morshuis, P. H. F., Smit, J. J., & Janssen, A. (2015). Life-data analysis for condition assessment of high-voltage assets. IEEE Electrical Insulation Magazine, 31(5), 20–25.
https://doi.org/10.1109/MEI.2015.7214443 [22] Cargill. (2018). https://www.cargill.com/bioindustrial/fr3-fluid/fr3-fluid-technical-details [23] Nynas. (20210). Nytro Taurus (IEC 60296) Ed. 5 – Standard Grade.
https://www.nynas.com/en/product-areas/transformer-oils/oils/nytro-taurus/ [24] Rozga P., Beroual A., Przybylek P., Jaroszewski M., & Strzelecki K. (2020). A review on synthetic ester liquids for transformer applications. Energies, 13(23), 6429.
https://doi.org/10.3390/en13236429 [25] European Standards. (2011). Power transformers – Part 1: General (IEC 60076-1:2011)