Archives of Electrical Engineering

[1] Repelianto A.S., Development of uniform eddy current probes using multi excitation coils, Doctoral Dissertation, Graduate School of Environment and Information Sciences, Yokohama National University (2020).
[2] Halchenko V.Y., Trembovetskaya R.V., Tychkov V.V., Surface eddy current probes: excitation systems of the optimal electromagnetic field (review), Devices and Methods of Measurements, vol. 11, no. 2, pp. 91–104 (2020), DOI: 10.21122/2220-9506-2020-11-2-91-104.
[3] Huang L., Zou J., Zhang J., ZhouY., Deng F., A novel rectangular vertical probe with a conductive shell for eddy current testing, International Journal of Applied Electromagnetics and Mechanics, vol. 62, no. 1, pp. 191–205 (2019), DOI: 10.3233/JAE-190058.
[4] Halchenko V.Y., Trembovetskaya R.V., Tychkov V.V., Linear synthesis of non-axial surface eddy current probes, International Journal “NDT Days”, vol. 2, no. 3, pp. 259–268 (2019).
[5] Trembovetska R.V., Halchenko V.Y., Tychkov V.V., Storchak A.V., Linear synthesis of uniform anaxial eddy current probes with a volumetric structure of the excitation system, International Journal “NDT Days”, vol. 3, no. 4. pp. 184–190 (2020).
[6] Trembovetska R.V., Halchenko V.Y., Tychkov V.V., Bazilo C.V., Linear synthesis of frame eddy current probes with a planar excitation system, International Scientific Journal “Mathematical Modeling”, vol. 4, no. 3. pp. 86–90 (2020).
[7] Itaya T., Ishida K., Kubota Y., Tanaka A., Takehira N., Visualization of eddy current distributions for arbitrarily shaped coils parallel to a moving conductor slab, Progress in Electromagnetics Research M, vol. 47, pp. 1–12 (2016), DOI: 10.2528/pierm16011204.
[8] Itaya T., Ishida K., Tanaka A., Takehira N., Miki T., A new analytical method for calculation of eddy current distribution and its application to a system of conductor-slab and rectangular coil, Progress in Electromagnetics Research Symposium, pp. 135–139 (2011).
[9] Halchenko V.Y., Trembovetska R.V., Tychkov V.V., Storchak A.V., Nonlinear surrogate synthesis of the surface circular eddy current probes, Przegląd Elektrotechniczny, no. 9, pp. 76–82 (2019), DOI: 10.15199/48.2019.09.15.
[10] Halchenko V.Y., Trembovetska R.V., Tychkov V.V., Development of excitation structure RBFmetamodels of moving concentric eddy current probe, Electrical Engineering & Electromechanics, no. 2, pp. 28–38 (2019), DOI: 10.20998/2074-272X.2019.2.05.
[11] Trembovetska R.V., Halchenko V.Y., Tychkov V.V., Studying the computational resource demands of mathematical models for moving surface eddy current probes for synthesis problems, Eastern- European Journal of Enterprise Technologies, vol. 95, no. 5/5, pp. 39–46 (2018), DOI: 10.15587/1729-4061.2018.143309.
[12] Forrester A.I.J., Sóbester A., Keane A.J., Engineering design via surrogate modelling: a practical guide, Chichester, Wiley (2008).
[13] Koziel S., Echeverrı’a-Ciaurri D., Leifsson L., Surrogate-based methods, Computational Optimization, Methods and Algorithms, Berlin, Springer-Verlag, pp. 33–59 (2011), https://link.springer.com/chapter/10.1007/978-3-642-20859-1_3
[14] Simon Haykin, Neural networks: a complete course, Moscow, Williams Publ. House (2006).
[15] Géron A., Hands-on machine learning with scikit-learn, keras, and tensorflow, O’Reilly Media (2019).
[16] Halchenko V.Y., Trembovetska R.V., Tychkov V.V., Storchak A.V., Methods for creating metamodels: state of the question, Visnyk of Vinnytsia Politechnical Institute, vol. 151, no. 4, pp. 74–88 (2020), DOI: 10.31649/1997-9266-2020-151-4-74-88.
[17] Elsawah M., Constructing uniform experimental designs: in view of centered and wrap-around discrepancy, LAP LAMBERT Academic Publishing: (Theory of probability, stochastics, mathematical statistics) (2014).
[18] HalchenkoV.Y., Trembovetska R.V., TychkovV.V., Storchak A.V., The construction of effective multidimensional computer designs of experiments based on a quasi-random additive recursive Rd-sequence, Applied Computer Systems, vol. 25, no. 1, pp. 70–76 (2020), DOI: 10.2478/acss-2020-0009.
[19] Brink H., Richards J., Feverolph M., Machine learning, SPb, Peter (2017).
[20] Benchabira A., Khiat M., A hybrid method for the optimal reactive power dispatch and the control of voltages in an electrical energy network, Archives of Electrical Engineering, vol. 68, no. 3, pp. 535–551 (2019), DOI: 10.24425/aee.2019.129340.
[21] Kuznetsov B.I., Nikitina T.B., Bovdui I.V., Active shielding of magnetic field of overhead power line with phase conductors of triangle arrangement, Technical Electrodynamisc, no. 4, pp. 25–28 (2020), DOI: 10.15407/techned2020.04.025.
[22] Halchenko V.Y., Yakimov A.N., Ostapuschenko D.L., Global optimum search of functions with using of multiagent swarm optimization hybrid with evolutional composition formation of population, Information Technology, no. 10, pp. 9–16 (2010).
[23] Halchenko V.Y., Yakimov A.N., Ostapuschenko D.L., Method of Pareto-optimal parametric synthesis of axially symmetric magnetic systems taking into account the nonlinear magnetic properties of a ferromagnetic, Journal of Technical Physics, no. 7, pp. 1–7 (2012).
[24] Suresho V., Janiko P., Jasinskio M., Metaheuristic approach to optimal power flow using mixed integer distributed ant colony optimization, Archives of Electrical Engineering, vol. 69, no. 2, pp. 335–348 (2020), DOI: 10.24425/aee.2020.133029.

[1] Trong T.N., The control structure for DC motor based on the flatness control, International Journal of Power Electronics and Drive Systems, vol. 8, no. 4, pp. 1814–1821 (2017), DOI: 10.11591/ijpeds.v8.i4.pp1814–1821.
[2] Li Z., Xia C., Speed control of brushless DC motor based on CMAC and PID controller, Proceedings of the 6th IEEEWorld Congress on Intelligent Control and Automation, Dalian, China, pp. 6318–6322 (2016).
[3] Wang M.S., Chen S.C., Shih C.H., Speed control of brushless DC motor by adaptive network-based fuzzy inference, Microsystem Technologies, vol. 24, no. 1, pp. 33–39 (2018), DOI: 10.1007/s00542-016-3148-0.
[4] Templos-Santos J.L., Aguilar-Mejia O., Peralta-Sanchez E., Sosa-Cortez R., Parameter tuning of PI control for speed regulation of a PMSM using bio-inspired algorithms, Algorithms, vol. 12, no. 3, pp. 54–75 (2019), DOI: 10.3390/a12030054.
[5] John D.A., Sehgal S., Biswas K., Hardware Implementation and Performance Study of Analog PIλDμ Controllers on DC Motor, Fractal and Fractional, vol. 4, no. 3, pp. 34–45 (2020), DOI: 10.3390/fractalfract4030034.
[6] Serradilla F., Cañas N., Naranjo J.E., Optimization of the Energy Consumption of Electric Motors through Metaheuristics and PID Controllers, Electronics, vol. 9, no. 11, pp. 1842–1858 (2020), DOI: 10.3390/electronics9111842.
[7] Hammoodi S.J., Flayyih K.S., Hamad A.R., Design and implementation speed control system of DC motor based on PID control and matlab Simulink, International Journal of Power Electronics and Drive Systems, vol. 11, no. 1, pp. 127–134 (2020), DOI: 10.11591/ijpeds.v11.i1.pp127-134.
[8] Zhang Y., An Y., Wang G., Kong X., Multi motor neural PID relative coupling speed synchronous control, Archives of Electrical Engineering, vol. 69, no. 1, pp. 69–88 (2020), DOI: 10.24425/aee.2020.131759.
[9] Wu H., Su W., Liu Z., PID controllers: Design and tuning methods, Proceedings of the 9th IEEE Conference on Industrial Electronics and Applications, Hangzhou, China, pp. 808–813 (2014).
[10] Sheel S., Gupta O., New techniques of PID controller tuning of a DC motor-development of a toolbox, MIT International Journal of Electrical and Instrumentation Engineering, vol. 2, no. 2, pp. 65–69 (2012).
[11] Kumar P., Raheja J., Narayan S., Design of PID Controllers Using Multiobjective Optimization with GA andWeighted Sum Objective Function Method, International Journal of Technical Research, vol. 2, no. 2, pp. 52–56 (2013).
[12] Chiha I., Liouane N., Borne P., Tuning PID Controller using Multi-objective Ant Colony Optimization, Applied Computational Intelligence and Soft Computing, Article ID 536326, 7 pages (2012), DOI: 10.1155/2012/536326.
[13] de Moura Oliveira P.B., Hedengren J.D., Pires E.J., Swarm-Based Design of Proportional Integral and Derivative Controllers Using a Compromise Cost Function: An Arduino Temperature Laboratory Case Study, Algorithms, vol. 13, no. 12, pp. 315–332 (2020), DOI: 10.3390/a13120315.
[14] Dewantoro G., Multi-objective optimization scheme for PID-controlledDCmotor, International Journal of Power Electronics and Drive Systems, vol. 7, no. 3, pp. 31–38 (2016), DOI: 10.11591/ijpeds.v7.i3.pp734-742.
[15] Achuthamenon Sylajakumari P., Ramakrishnasamy R., Palaniappan G., Taguchi Grey Relational Analysis for Multi-Response Optimization of Wear in Co-Continuous Composite, Materials, vol. 11, no. 9, pp. 3–17 (2018), DOI: 10.3390/ma11091743.
[16] El-Samahy A.A., Shamseldin M.A., Brushless DC motor tracking control using self-tuning fuzzy PID control and model reference adaptive control, Ain Shams Engineering Journal, vol. 9, no. 3, pp. 341–352 (2018), DOI: 10.1016/j.asej.2016.02.004.
[17] Neogi B., Islam S.S., Chakraborty P., Barui S., Das A., Introducing MIT rule toward the improvement of adaptive mechanical prosthetic armcontrol model, In Progress in Intelligent Computing Techniques: Theory, Practice, and Applications, Springer, Singapore, pp. 379–388 (2018).
[18] Akbar M.A., Naniwa T., Taniai Y., Model reference adaptive control for DC motor based on Simulink, Proceeding of the 6th IEEE International Annual Engineering Seminar (InAES),Yogyakarta, Indonesia pp. 101–106 (2016).
[19] Sethi D., Kumar J., Khanna R., Design of fractional order MRAPIDC for inverted pendulum system, Indian Journal of Science and Technology, vol. 10, no. 31, pp. 1–5 (2017), DOI: 10.17485/ijst/2017/v10i31/113893.
[20] Jain P., Nigam M.J., Design of a model reference adaptive controller using modified MIT rule for a second-order system, Advances in Electronic and Electric Engineering, vol. 3, no. 4, pp. 477–484, (2013).
[21] Dimeas I., Petras I., Psychalinos C., New analog implementation technique for fractional-order controller: a DC motor control, AEU-International Journal of Electronics and Communications, vol. 78, pp. 192–200 (2017), DOI: 10.1016/j.aeue.2017.03.010.
[22] Qader M.R., Identifying the optimal controller strategy for DC motors, Archives of Electrical Engineering, vol. 68, no. 1, pp. 101–114 (2019), DOI: 10.11591/ijra.v6i4.pp252-268.
[23] George M.A., Kamath D.V., OTA-C voltage-mode proportional- integral- derivative (PID) controller for DC motor speed control, Proceedings of the Academicsera 461st International Conference on Science, Technology, Engineering and Management (ICSTEM), Paris, France, pp. 21–26 (2019).
[24] Swarnkar P., Jain S.K., Nema R.K., Adaptive control schemes for improving the control system dynamics: a review, IETE Technical Review, vol. 31, no. 1, pp. 17–33 (2014), DOI: 10.1080/02564602.2014.890838.
[25] Hägglund T., The one-third rule for PI controller tuning, Computers&Chemical Engineering, vol. 127, pp. 25–30 (2019), DOI: 10.1016/j.compchemeng.2019.03.027.
[26] George M.A., Kamath D.V., Thirunavukkarasu I., An Optimized Fractional-Order PID (FOPID) Controller for a Non-Linear Conical Tank Level Process, Proceedings of IEEE Applied Signal Processing Conference (ASPCON), Kolkata, India, pp. 134–138 (2020).

[1] Boileau T., Leboeuf N., Nahid-Mobarakeh B., Online identification of PMSM parameters: parameter identifiability and estimator comparative study, IEEE Transactions on Industry Applications, vol. 47, no. 4, pp. 1944–1957 (2011), DOI: 10.1109/TIA.2011.2155010.
[2] Ichikawa S., Tomita M., Doki S., Sensorless control of permanent-magnet synchronous motors using online parameter identification based on system identification theory, IEEE Transactions on Industrial Electronics, vol. 53, no. 2, pp. 363–372 (2006), DOI: 10.1109/TIE.2006.870875.
[3] Jian-fei S., Bao-jun G., Yan-ling L., Research of parameter identification of permanent magnet synchronous motor online, Electric Machines and Control, vol. 22, no. 3, pp. 17–24 (2018), DOI: 10.15938/j.emc.2018.03.003.
[4] Fan S., LuoW., Zou J., A hybrid speed sensorless control strategy for PMSM based on MRAS and fuzzy control, Proceedings of 7th International Power Electronics and Motion Control Conference, Harbin, China, pp. 2976–2980 (2012), DOI: 10.1109/IPEMC.2012.6259344.
[5] Shi Y., Sun K., Huang L., Online identification of permanent magnet flux based on extended Kalman filter for IPMSM drive with position sensorless control, IEEE Transactions on Industrial Electronics, vol. 59, no. 11, pp. 4169–4178 (2012), DOI: 10.1109/TIE.2011.2168792.
[6] Liu K., Zhang J., Adaline neural network based online parameter estimation for surface-mounted permanent magnet synchronous machines, Proceedings of the CSEE, vol. 30, no. 30, pp. 68–73 (2010).
[7] Gu X., Hu S., Shi T., Muti-parameter decoupling online identification of permanent magnet synchronous motor based on neural network, Transactions of China Electrotechnical Society, vol. 30, no. 6, pp. 114–121 (2015).
[8] Liwei Z., Peng Z., Yuefeng L., Parameter identification of permanent magnet synchronous motor based on variable step-size Adaline neural network, Transactions of China Electrotechnical Society, vol. 33, no. z 2, pp. 377–384 (2018).
[9] Peerez J.N.H., Hernandez O.S., Caporal R.M., Parameter identification of a permanent magnet synchronous machine based on current decay test and particle swarm optimization, IEEE Latin America Transactions, vol. 11, no. 5, pp. 1176–1181 (2013), DOI: 10.1109/TLA.2013.6684392.
[10] Liu Z., Wei H., Zhong Q., Parameter estimation for VSI-Fed PMSM based on a dynamic PSO with learning strategies, IEEE Transactions on Power Electronics, vol. 32, no. 4, pp. 3154–3165 (2017), DOI: 10.1109/TPEL.2016.2572186.
[11] Liu Z., Wei H., Li X., Global identification of electrical and mechanical parameters in PMSM drive based on dynamic self-learning PSO, IEEE Transactions on Power Electronics, vol. 33, no. 12, pp. 10858–10871 (2018), DOI: 10.1109/TPEL.2018.2801331.
[12] Sandre-Hernandez O., Morales-Caporal R., Rangel-Magdaleno J., Parameter identification of PMSMs using experimental measurements and a PSO algorithm, IEEE Transactions on Instrumentation and Measurement, vol. 64, no. 8, pp. 2146–2154 (2015), DOI: 10.1109/TIM.2015.2390958.
[13] Liu X., Hu W., Ding W., Research on multi-parameter identification method of permanent magnet synchronous motor, Transactions of China Electrotechnical Society, vol. 35, no. 6, pp. 1198–1207 (2020).
[14] Liu C., Zhou S., Liu K., Permanent magnet synchronous motor multiple parameter identification and temperature monitoring based on binary-modal adaptive wavelet particle swarm optimization, Acta Automatica Sinica, vol. 39, no. 12, pp. 2121–2130 (2013), DOI: 10.3724/SP.J.1004.2013.02121.
[15] Fu X., Gu H., Chen G., Permanent magnet synchronous motors parameters identification based on Cauchy mutation particle swarm optimization, Transactions of China Electrotechnical Society, vol. 29, no. 5, pp. 127–131 (2014).
[16] Guo-han L., Jing Z., Zhao-hua L., Kui-yin Z., Parameter identification of PMSM using improved comprehensive learning particle swarm optimization, Electric Machines and Control, vol. 19, no. 1, pp. 51–57 (2015).
[17] San-yang L., Ping Z., Ming-min Z., Artificial bee colony algorithm based on local search, Control and Decision, vol. 29, no. 1, pp. 123–128 (2014).
[18] Ding X., Liu G., Du M., Efficiency improvement of overall PMSM-Inverter system based on artificial bee colony algorithm under full power range, IEEE Transactions on Magnetics, vol. 52, no. 7, pp. 1–4 (2016), DOI: 10.1109/TMAG.2016.2526614.
[19] Zawilak T., Influence of rotor’s cage resistance on demagnetization process in the line start permanent magnet synchronous motor, Archives of Electrical Engineering, vol. 69, no. 2, pp. 249–258 (2020), DOI: 10.24425/aee.2020.133023.

[1] Thomas Allen Short, Electric Power Distribution Handbook, Second Edition, CRC Press (2014).
[2] Kersting W., Distribution System Modeling and Analysis, Fourth Edition, CRC Press (2017).
[3] Grotas S., Yakoby Y., Gera I. et al., Power Systems Topology and State Estimation by Graph Blind Source Separation, IEEE Transactions on Signal Processing, vol. 67, no. 8, pp. 2036–2051 (2019).
[4] Jun Jiang, Ling Liu, Resonance mechanisms of a single line-to-ground fault on ungrounded systems, Archives of Electrical Engineering, vol. 69, no. 2, pp. 455–466 (2020).
[5] Fan Kaijun, Xu Bingyin, Dong Jun et al., Identification method for feeder topology based on successive polling of smart terminal unit, Automation of Electric Power Systems, vol. 39, no. 11, pp. 180–186 (2015).
[6] Zhu Guofang, Shen Peifeng, Wang Yong et al., Dynamic identification method of feeder topology for distributed feeder automation based on topological slices, Power System Protection and Control, vol. 46, no. 14, pp. 152–157 (2018).
[7] Li X., Poor H.V., Scaglione A., Blind topology identification for power systems, 2013 IEEE International Conference on Smart Grid Communications (SmartGridComm), IEEE, pp. 91–96 (2013).
[8] Lazaropoulos A.G., Measurement Differences, Faults and Instabilities in Intelligent Energy Systems– Part 1: Identification of Overhead High-Voltage Broadband over Power Lines Network Topologies by Applying Topology Identification Methodology (TIM), Trends in Renewable Energy, vol. 2, no. 3, pp. 85–112 (2016). [9] Lazaropoulos A.G., Improvement of Power Systems Stability by Applying Topology Identification Methodology (TIM) and Fault and Instability Identification Methodology (FIIM) – Study of the Overhead Medium-Voltage Broadband over Power Lines (OVMVBPL) Networks Case, Trends inRenewable Energy, vol. 3, no. 2, pp. 102–128 (2017).
[10] Passerini F., Tonello A.M., Power line network topology identification using admittance measurements and total least squares estimation, 2017 IEEE International Conference on Communications (ICC), pp. 1–6 (2017).
[11] Soumalas K., Messinis G., Hatziargyriou N., A data driven approach to distribution network topology identification, 2017 IEEE Manchester PowerTech, pp. 1–6 (2017).
[12] Ge Haotian, Xu Binyin, Topology Identification of Low Voltage Distribution Network Based on Current Injection Method, Archives of Electrical Engineering, vol. 70, no. 2, pp. 297–306 (2021).

[1] Wang Q., Martinez-Anido C.B., Wu H.Y., Florita A.R., Hodge B.M., Quantifying the economic and grid reliability impacts of improved wind power prediction, IEEE Transactions on Sustainable Energy, vol. 7, no. 4, pp. 1525–1537 (2016), DOI: 10.1109/TSTE.2016.2560628.
[2] Liu H.Q., Li W.J., Li Y.C., Ultra-short-term wind power prediction based on copula function and bivariate EMD decomposition algorithm, Archives of Electrical Engineering, vol. 69, no. 2, pp. 271–286 (2020), DOI: 10.24425/aee.2020.133025.
[3] Waskowicz B., Statistical analysis and dimensioning of a wind farm energy storage system, Archives of Electrical Engineering, vol. 66, no. 2, pp. 265–277 (2017), DOI: 10.1515/aee-2017-0020.
[4] Cassola F., Burlando M., Wind speed and wind energy forecast through Kalman filtering of numerical weather prediction model output, Applied Energy, vol. 99, no. 6, pp. 154–166 (2012), DOI: 10.1016/j.apenergy.2012.03.054.
[5] Li J., Li M., Prediction of ultra-short-term wind power based on BBO-KELM method, Journal of Renewable and Sustainable Energy, vol. 11, no. 5, 056104 (2019), DOI: 10.1063/1.5113555.
[6] Zhang Y.G., Wang P.H., Zhang C.H., Lei S., Wind energy prediction with LS-SVM based on Lorenz perturbation, The Journal of Engineering, vol. 2017, no. 13, pp.1724–1727 (2017), DOI: 10.1049/joe.2017.0626.
[7] Duan J., Wang P., Ma W., Short-term wind power forecasting using the hybrid model of improved variational mode decomposition and Correntropy Long Short-term memory neural network, Energy, vol. 214, 118980 (2021), DOI: 10.1016/j.energy.2020.118980.
[8] Moreno S.R., Silva R.G. D., Mariani V.C., Multi-step wind speed forecasting based on hybrid multistage decomposition model and long short-term memory neural network, Energy Conversion and Management, vol. 213, 112869 (2020), DOI: 10.1016/j.enconman.2020.112869.
[9] Ramon G.D., Matheus H.D.M.R., Sinvaldo R.M., A novel decomposition-ensemble learning framework for multi-step ahead wind energy forecasting, Energy, vol. 216, 119174 (2021), DOI: 10.1016/j.energy.2020.119174.
[10] Yldz C., Akgz H., Korkmaz D., An improved residual-based convolutional neural network for very short-term wind power forecasting, Energy Conversion and Management, vol. 228, no. 1, 113731 (2021), DOI: 10.1016/j.enconman.2020.113731.
[11] Ribeiro G.T., Mariani V.C., Coelho L.D.S., Enhanced ensemble structures using wavelet neural networks applied to short-term load forecasting, Engineering Applications of Artificial Intelligence, vol. 28, no. June, pp. 272–281 (2019), DOI: 10.1016/j.engappai.2019.03.012.
[12] Liu X., Zhou J., Qian H.M., Short-term wind power forecasting by stacked recurrent neural networks with parametric sine activation function, Electric Power Systems Research, vol. 192, 107011 (2021), DOI: 10.1016/j.epsr.2020.107011.
[13] Zhu R., Liao W., Wang Y., Short-term prediction for wind power based on temporal convolutional network, Energy Reports, vol. 6, pp. 424–429 (2019), DOI: 10.1016/j.egyr.2020.11.219.
[14] Gilles J., Empirical wavelet transform, IEEE Transactions on Signal Processing, vol. 61, no. 16, pp. 3999–4010 (2013), DOI: 10.1109/TSP.2013.2265222.
[15] Wang S.X., Zhang N.,Wu L.,Wang Y.M., Wind speed prediction based on the hybrid ensemble empirical mode decomposition and GA-BP neural network method, Renewable Energy, vol. 94, pp. 629–636 (2016), DOI: 10.1016/j.renene.2016.03.103.
[16] Lanckriet G.R.G., Cristianini N., Bartlett P.L., Ghaoui L.E., Jordan M.I., Learning the kernel matrix with semi-definite programming, Journal of Machine learning research, vol. 5, pp. 323–330 (2002).
[17] Gönen M., Alpaydin E., Multiple kernel learning algorithms, Journal of Machine Learning Research, vol. 12, pp. 2211–2268 (2011).
[18] Wu D., Wang B.Y., Precup D., Boulet B., Multiple kernel learning based transfer regression for electric load forecasting, IEEE Transactions on Smart Grid, vol. 11, no. 2, pp. 1183–1192 (2020), DOI: 10.1109/TSG.2019.2933413.

[1] King-Jet Tseng,YaomingWang D., MahindaVilathgamuwa, An experimentally verified hybrid Cassie- Mayr electric arc model for power electronics simulations, IEEE Transactions on Power Electronics, vol. 12, no. 3, pp. 429–436 (1997), DOI: 10.1109/63.575670.
[2] Sawicki A., Haltof M., Spectral and integral methods of determining parameters in selected electric arc models with a forced sinusoid current circuit, Archives of Electrical Engineering, vol. 65, no. 1, pp. 87–103 (2016), DOI: 10.1515/aee-2016-0007.
[3] Pentegov I.V., Sidorec V.N., Comparative analysis of models of dynamic welding arc, The Paton Welding Journal, no. 12, pp. 45–48 (2015), DOI: 10.15407/tpwj2015.12.09.
[4] Kalasek V., Measurements of time constants on cascade d.c. arc in nitrogen, TH-Report 71-E18, Eindhoven, pp. 1–30 (1971).
[5] Sawicki A., The universal Mayr–Pentegov model of the electric arc, Przegl˛ad Elektrotechniczny (Electrical Review), vol. 94, no. 12, pp. 208–211 (2019), DOI: 10.15199/48.2019.12.47.
[6] Katsaounis A., Heat flow and arc efficiency at high pressures in argon and helium tungsten arcs, Welding Research Supplement I, September, pp. 447-s–454-s (1993).
[7] Maximov S., Venegas V., Guardado J.L., Melgoza E., Torres D., Asymptotic methods for calculating electric arc model parameters, Electrical Engineering, vol. 94, no. 2, pp. 89–96 (2012), DOI: 10.1007/s00202-011-0214-6.
[8] Sawicki A., Arc models for simulating processes in circuits with a SF6 circuit breaker, Archives of Electrical Engineering, vol. 68, no. 1, pp. 147–159 (2019), DOI: 10.24425/aee.2019.125986.
[9] Sawicki A., Classical and Modified Mathematical Models of Electric Arc, Institute ofWelding Bulletin, no. 4, pp. 67–73 (2019), DOI: 10.17729/ebis.2019.4/7.
[10] Janowski T., Jaroszynski L., Stryczewska H.D., Modification of the Mayr’s electric arc model for gliding Arc Analysis, XXVI International Conference on Phenomena in Ionized Gases, Nagoya, Japan 2001/7/17, pp. 341–342 (2001).
[11] Ziani A., Moulai H., Hybrid model of electric arcs in high voltage circuit breakers, Electric Power Systems Research, vol. 92, pp. 37–42 (2012), DOI: 10.1016/j.epsr.2012.04.021.

[1] Kuhlman K., Hochspannungsisolatoren, Elektrotechnische Zeitschrift (in German), vol. 31, iss. 3, pp. 51–55 (1910).
[2] Lustgarten J., High-tension porcelain line insulators, Journal of the Institution of Electrical Engineers, vol. 49, pp. 235–279 (1912).
[3] IEC 60060-1:2010, High-voltage test techniques – Part 1: General definitions and test requirements, edition 3 (2010).
[4] Gallet G., How to design a rain apparatus for the dielectric tests, IEEE PES Summer Meeting, San Francisco, paper A 75 490-3 (1975).
[5] Huc J., Rowe S.W., Wet testing installation design, 5th Int. Symposium on High Voltage Engineering, Athens, paper 52.03 (1983).
[6] Chrzan K.L., Streubel H., Artificial rain test of outdoor long rod insulators, Int. Symposium on High Voltage Engineering, ISH, Cap Town, paper E-31 (2009).
[7] Rizk F.A.M., Kamel S.I., Modelling of HVDC wall bushing flashover in nonuniform rain, IEEE Trans. on Power Delivery, vol. 6, no. 4, pp. 1650–1662 (1991).
[8] Matsuoka M., Naito K., Irie T., Kondo K., Evaluation methods of polymer insulators under contaminated conditions, IEEE Transmission and Distribution Asia Pacific Conference, pp. 2197–2202 (2002).
[9] Chrzan K.L., Swierzyna Z., Artificial rain test of insulators, Przegl˛ad Elektrotechniczny (in Polish), no. 11b, pp. 218–221 (2012).
[10] Szpor S., Dzierzek H.,WiniarskiW., High voltage engineering, WNT (in Polish),Warsaw, vol. 1, p. 88 (1978).
[11] Estorff W., Cron H., High Voltage insulator as pollution problem, ETZ (in German), vol. 73, iss. 3, pp. 57–62 (1952).
[12] Chrzan K.L., Leakage currents on naturally contaminated porcelain and silicone insulators, IEEE Trans. on Power Delivery, vol. 25, no. 2, pp. 904–910 (2010), DOI: 10.1109/TPWRD.2009.2034665.
[13] Streubel H., Calculation of AC Flashover voltage under rain, Hermsdorfer Technische Mitteilungen (in German), iss. 31, pp. 974–980 (1971).
[14] Lan L., Gorur R.S., Computation of ac wet flashover voltage of ceramic and composite insulators, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 15, no. 5, pp. 1346–1352 (2008), DOI: 10.1109/TDEI.2008.4656243.
[15] Erler F., About AC pollution flashover on thick insulators, Elektrie (in German), iss. 3, pp. 100–102 (1969).
[16] Hao Y., Liao Y., Kuang Z., Sun Y., Shang G., Zhang W., Mao G., Yang L., Zhang F., Li L., Experimental investigation on influence of shed parameters on surface rainwater characteristics of largediameter composite post insulators under rain conditions, Energies, vol. 13, no. 19, 5011 (2020), DOI: 10.3390/en13195011.
[17] Ely C.H.A., Lambeth P.J., Looms J.S.T., The booster shed: prevention of flashover of polluted substation insulators in heavy wetting, IEEE Transactions on Power Apparatus and Systems, vol. PAS-97, no. 6, pp. 2187–2197 (1978).
[18] Yang L., Kuang Z., Sun Y., Liao Y., Hao Y., Li L., Zhang F., Study on Surface Rainwater and Arc Characteristics of High-Voltage Bushing with Booster Sheds under Heavy Rainfall, IEEE Access, vol. 6, pp. 146865–146875 (2020), DOI: 10.1109/ACCESS.2020.3012978.
[19] Okada N., Ikeda K., Kondo K., Ito S., Contamination withstand voltage characteristics of hydrophobic polymers insulators under simulated rain conditions, IEEE Int. Symposium on Electrical Insulation, Boston, USA, pp. 228–231 (2002).
[20] Gorur R.S., de la O A., El-Kishky A., Chowdhary M., Mukherjee H., Sundaram R., Burnham J.T., Sudden flashovers of nonceramic insulators in artificial contamination tests, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 3, no. 1, pp. 79–86 (1997), DOI: 10.1109/94.590870.
[21] Hartings R., The AC-Behavior of a Hydrophilic and Hydrophobic Post Insulator during Rain, IEEE Trans. on Power Delivery, vol. 9, no. 3, pp. 1584–1592 (1994).
[22] Wang S., Liang X., Huang L., Experimental study on the pollution flashover mechanism of polymer insulators, IEEE Power Engineering Society Winter Meeting, Singapore, pp. 2830–2833 (2000), DOI: 10.1109/PESW.2000.847332.
[23] de la O A., Gorur R.S., Flashover of contaminated nonceramic outdoor insulators in a wet atmosphere, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 5, no. 6, pp. 814–823 (1998), DOI: 10.1109/94.740762.

[1] Hu Y., Wu B., Vaughan J., Singhose W., Oscillation suppressing for an energy efficient bridge crane using input shaping, 9th Asian Control Conference (ASCC), IEEE, pp. 1–5 (2013), DOI: 10.1109/ASCC.2013.6606196.
[2] Watanabe K., Yoshikawa M., Ishikawa J., Damping control of suspended load for truck cranes in consideration of second bending mode oscillation, in IECON 2018 – 44th Annual Conference of the IEEE Industrial Electronics Society, IEEE, pp. 4561–4568 (2018), DOI: 10.1109/IECON.2018.8591232.
[3] Nowicki M., Respondek W., Piasek J., Kozłowski K., Geometry and flatness of m-crane systems, Bulletin of the Polish Academy of Sciences: Technical Sciences, vol. 67, no. 5, pp. 893–903 (2019), DOI: 10.24425/BPASTS.2019.130872.
[4] Cheeseman I., BennettW., The Effect of the Ground on a Helicopter Rotor in Forward Flight, Ministry of Supply, Aeronautical Research Council, Reports and Memoranda, A.R.C. Technical Report R.&M., no. 3021 (1957).
[5] Sharf I., Nahon M., Harmat A., Khan W., Michini M., Speal N., Trentini M., Tsadok T., Wang T., Ground effect experiments and model validation with Draganflyer x8 rotorcraft, in 2014 International Conference on Unmanned Aircraft Systems (ICUAS), pp. 1158–1166 (2014), DOI: 10.1109/ICUAS.2014.6842370.
[6] Kan X., Thomas J., Teng H., Tanner H.G., Kumar V., Karydis K., Analysis of Ground Effect for Small- Scale UAVs in Forward Flight, IEEE Robotics and Automation Letters, vol. 4, no. 4, pp. 3860–3867 (2019), DOI: 10.1109/LRA.2019.2929993.
[7] Xuan-Mung N., Hong S.-K., Barometric Altitude Measurement Fault Diagnosis for the Improvement of Quadcopter Altitude Control, 19th International Conference on Control, Automation and Systems (ICCAS), Jeju, Korea (South), pp. 1359–1364 (2019), DOI: 10.23919/ICCAS47443.2019.8971729.
[8] Xuan-Mung N., Hong S.-K., Nguyen N.P., Le Nhu Ngu Thanh Ha, Le T.L., Autonomous Quadcopter Precision Landing Onto a Heaving Platform: New Method and Experiment, IEEE Access, vol. 8, pp. 167192–167202 (2020), DOI: 10.1109/ACCESS.2020.3022881.
[9] Xian B., Liu Y., Zhang X., Cao M., Wang F., Hovering control of a nano quadrotor unmanned aerial vehicle using optical flow, in Proceedings of the 33rd Chinese Control Conference 2014, pp. 8259–8264 (2014), DOI: 10.1109/ChiCC.2014.6896384.
[10] Scerri J., Djordjevic G.S., Todorovic D., Modeling and control of a reaction wheel pendulum with visual feedback, in 2017 International Conference on Control, Automation and Diagnosis (ICCAD), pp. 024–029 (2017), DOI: 10.1109/CADIAG.2017.8075625.
[11] Ito K., Yamakawa Y., Ishikawa M.,Winding manipulator based on high-speed visual feedback control, in 2017 IEEE Conference on Control Technology and Applications (CCTA), pp. 474–480 (2017), DOI: 10.1109/CCTA.2017.8062507.
[12] Cheng H., Lin L., Zheng Z., Guan Y., Liu Z., An autonomous vision-based target tracking system for rotorcraft unmanned aerial vehicles, in 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 1732–1738 (2017), DOI: 10.1109/IROS.2017.8205986.
[13] Dong Q., Zou Q., Visual UAV detection method with online feature classification, in 2017 IEEE 2nd Information Technology, Networking, Electronic and Automation Control Conference (ITNEC), pp. 429–432 (2017), DOI: 10.1109/ITNEC.2017.8284767.
[14] Viola P., Jones M., Rapid object detection using a boosted cascade of simple features, in Proceedings of the 2001 IEEE Computer Society Conference on Computer Vision and Pattern Recognition, CVPR 2001, vol. 1, pp. I.511–I.518 (2001), DOI: 10.1109/CVPR.2001.990517.
[15] Urbanski K., Visual Feedback for Control using Haar-Like Classifier to Identify the Quadcopter Position, in International Conference on Methods and Models in Automation and Robotics MMAR (2018), DOI: 10.1109/MMAR.2018.8485886.
[16] Bouabdallah S., Siegwart R., Backstepping and Sliding-mode Techniques Applied to an Indoor Micro Quadrotor, in Proceedings of the 2005 IEEE International Conference on Robotics and Automation, Barcelona, Spain, pp. 2247–2252 (2005), DOI: 10.1109/ROBOT.2005.1570447.
[17] Dikmen I.C., Arisoy A., Temeltas H., Attitude control of a quadrotor, in 2009 4th International Conference on Recent Advances in Space Technologies, pp. 722–727 (2009), DOI: 10.1109/RAST.2009.5158286.
[18] Astudillo A., Muñoz P., Álvarez F., Rosero E., Altitude and attitude cascade controller for a smartphone-based quadcopter, in 2017 International Conference on Unmanned Aircraft Systems (ICUAS), pp. 1447–1454 (2017), DOI: 10.1109/ICUAS.2017.7991400.
[19] GiernackiW., Iterative Learning Method for In-Flight Auto-Tuning of UAV Controllers Based on Basic Sensory Information, Applied Sciences, vol. 9, no. 4, p. 648 (2019), DOI: 10.3390/app9040648.
[20] Shang B., Liu J., Zhang Y., Wu C., Chen Y., Fractional-order flight control of quadrotor UAS on vision-based precision hovering with larger sampling period, Nonlinear Dynamics, vol. 97, no. 2, pp. 1735–1746 (2019), DOI: 10.1007/s11071-019-05103-5.
[21] Sadalla T., Horla D., Giernacki W., Kozierski P., Influence of time delay on fractional-order PIcontrolled system for a second-order oscillatory plant model with time delay, Archives of Electrical Engineering, vol. 66, no. 4, pp. 693–704 (2017), DOI: 10.1515/aee-2017-0052.
[22] Gonzalez-Hernandez I., Salazar S., Lopez R., Lozano R., Altitude control improvement for a Quadrotor UAV using integral action in a sliding-mode controller, in 2016 International Conference onUnmanned Aircraft Systems (ICUAS), pp. 711–716 (2016), DOI: 10.1109/ICUAS.2016.7502674.
[23] Wei P., Chan S.N., Lee S., Kong Z., Mitigating ground effect on mini quadcopters with model reference adaptive control, International Journal of Intelligent Robotics and Applications, vol. 3, no. 3, pp. 283–297 (2019), DOI: 10.1007/s41315-019-00098-z.
[24] Lopez-Franco C., Gomez-Avila J., Alanis A.Y., Arana-Daniel N., Villaseñor C., Visual Servoing for an Autonomous Hexarotor Using a Neural Network Based PID Controller, Sensors, vol. 17, no. 8, p. 1865 (2017), DOI: 10.3390/s17081865.
[25] Almeshal A.M., Alenezi M.R., A Vision-Based Neural Network Controller for the Autonomous Landing of a Quadrotor on Moving Targets, Robotics, vol. 7, no. 4, p. 71 (2018), DOI: 10.3390/robotics7040071.
[26] Levine W.S., Ed., The Control Handbook, CRC Press, Inc., Ashwin J. Shah, Jaico Publishing House, 121, M.G. Road, Mumbai – 400 023 (1999).
[27] Urbanski K., Zawirski K., Improved Method for Position Estimation Using a Two-Dimensional Scheduling Array, Automatika – Journal for Control, Measurement, Electronics, Computing and Communications, vol. 56, no. 3, pp. 331–340 (2015), DOI: 10.7305/automatika.2015.12.732.
[28] PL-Grid Infrastructure – Welcome – Infrastruktura PL-Grid: www.plgrid.pl/en.

[1] Hava A.M., Kerkman R.J., Lipo T.A., A high-performance generalized discontinuous PWM algorithm, IEEE Transactions on Industry Applications, vol. 34, no. 5, pp. 1059–1071 (1998), DOI: 10.1109/28.720446.
[2] Hava A.M.,Kerkman R.J., Lipo T.A., Simple analytical and graphical methods for carrier-basedPWMVSI drives, IEEE Transactions on Power Electronics, vol. 14, no. 1, pp. 49–61 (1999), DOI: 10.1109/63.737592.
[3] Olorunfemi Ojo, The generalized discontinuous PWM scheme for three-phase voltage source inverters, IEEE Transactions on Industry Electronics, vol. 51, no. 6, pp. 1280–1289 (2004), DOI: 10.1109/TIE.2004.837919.
[4] Narayanan G., Ranganathan V.T., Two novel synchronized bus-clamping PWM strategies based on space vector approach for high power drives, IEEE Transactions on Power Electronics, vol. 17, no. 1, pp. 84–93 (2002), DOI: 10.1109/63.988673.
[5] Soumitra Das, Narayanan G., Pandey M., Space-Vector-Based Hybrid Pulsewidth Modulation Techniques for a Three-Level Inverter, IEEE Transactions on Power Electronics, vol. 29, no. 9, pp. 4580–4591 (2014), DOI: 10.1109/TPEL.2013.2287095.
[6] Narayanan G., Zhao Di, Krishnamurthy H.K., Rajapandian Ayyanar, Ranganathan V.T., Space vector basedPWMtechniques for reduced current ripple, IEEE Transactions on Industrial Electronics, vol. 55, no. 4, pp. 1614–1627 (2008), DOI: 10.1109/TIE.2007.907670.
[7] Hari V.S.S.P.K., Narayanan G., Space-vector-based hybrid pulse width modulation technique to reduce line current distortion in induction motor drives, IET power Electronics, vol. 5, no. 8, pp. 1463–1471 (2012), DOI: 10.1049/iet-pel.2012.0078.
[8] Changliang Xia, Guozheng Zhang, Yan Yan, Xin Gu, Tingna Shi, Xiangning He, Discontinuous Space Vector PWM Strategy of Neutral-Point-Clamped Three-Level Inverters for Output Current Ripple Reduction, IEEE Transactions on Power Electronics, vol. 32, no. 7, pp. 5109–5121 (2017), DOI: 10.1109/TPEL.2016.2611687.
[9] Basu K., Prasad J.S.S., Narayanan G., Krishnamurthy H.K., Ayyanar R., Reduction of torque ripple in induction motor drives using an advanced hybrid PWM technique, IEEE Transactions on Industrial Electronics, vol. 56, no. 6, pp. 2085–2091 (2010), DOI: 10.1109/TIE.2009.2034183.
[10] Das S., Narayanan G., Novel switching sequences for a space-vector-modulated three-level inverter, IEEE Transactions on Industrial Electronics, vol. 59, no. 3, pp. 1477–1487 (2012), DOI: 10.1109/TIE.2011.2163373.
[11] Das S., Narayanan G., Analytical closed-form expressions for harmonic distortion corresponding to novel switching sequences for neutral-point-clamped inverters, IEEE Transactions on Industrial Electronics, vol. 61, no. 9, pp. 4485–4497 (2014), DOI: 10.1109/TIE.2013.2293708.
[12] Narayanan G., RanganathanV.T., Analytical evaluation of harmonic distortion inPWMAC drives using the notion of stator flux ripple, IEEE Transactions on Power Electronics, vol. 20, no. 2, pp. 466–474 (2005), DOI: 10.1109/TPEL.2004.842961.
[13] Zhao D., Hari V.S.S.P.K., Narayanan G., Ayyanar R., Space-vector-based hybrid pulse width modulation techniques for reduced harmonic distortion and switching loss, IEEE Trans. Power Electron., vol. 25, no. 3, pp. 760–774 (2010), DOI: 10.1109/TPEL.2009.2030200.
[14] Hava A.M., Kerkman R.J., Lipo T.A., Carrier-based PWM-VSI overmodulation strategies: Analysis, comparison and design, IEEE Transactions on Power Electronics, vol. 13, no. 4, pp. 674–689 (1998), DOI: 10.1109/63.704136.
[15] Raja Ayyanar, Zhao D., Krishnamurthy H.K., Narayanan G., Space vector methods for AC drives to achieve high efficiency and superior waveform quality, Technical report submitted to Office of Novel Research (2004).
[16] Yen-Shin Lai, Bowes S.R., Optimal bus-clamped PWM techniques for three-phase motor drives, in Proceedings of the IEEE IECON04, Nov. 2–6, Busan, Korea, pp. 1475–1480 (2004), DOI: 10.1109/IECON.2004.1431796.
[17] Boost M.A., Ziogas P.D., State-of-the-art carrier PWM techniques: acritical evaluation, IEEE Transactions on Industry Applications, vol. 24 no. 2, pp. 271–290 (1988), DOI: 10.1109/28.2867.
[18] Trzynadlowski A.M., Legowski S., Minimum-loss vectorPWMstrategy for three-phase inverters, IEEE Transactions on Power Electronics, vol. 9, no. 1, pp. 26–34 (1994), DOI: 10.1109/63.285490.
[19] Mao X., Ayyanar R., Krishnamurthy H.K., Optimal Variable switching frequency scheme for reducing switching loss in single-phase inverters based on time-domain ripple analysis, IEEE Transactions on Power Electronics, vol. 14, no. 4, pp. 991–1001 (2009), DOI: 10.1109/TPEL.2008.2009635.
[20] Kolar J.W., Ertl H., Zach F.C., Influence of the modulation method on the conduction and switching losses of a PWM converter system, IEEE Transactions on Industry Applications, vol. 27, no. 6, pp. 1063–1075 (1991), DOI: 10.1109/28.108456.
[21] Trzynadlowski A.M., Kirlin R.L., Legowski S.F., Space vectorPWMtechnique with minimum switching losses and a variable pulse rate, IEEE Transactions on Industry Electronics, vol. 44, no. 2, pp. 173–181 (1997), DOI: 10.1109/41.564155.
[22] Dae-Woong Chung, Seung-Ki Sul, Minimum-loss strategy for three-phase PWM rectifier, IEEE Transactions on Industry Electronics, vol. 46, no. 3, pp. 517–526 (1999), DOI: 10.1109/41.767058.
[23] Amitkumar K.S., Narayanan G., Simplified implementation of space vector PWM strategies for a three level inverter, Proc. of 7th IEEE International Conference (ICIIS) (2012), DOI: 10.1109/ICIInfS.2012.6304816.
[24] Das S.,Narayanan G.,Novel switching sequences for a space vector modulated three level inverter, IEEE Transactions on Industrial Electronics, vol. 59, no. 3, pp. 1477–1487 (2012), DOI: 10.1109/TIE.2011.2163373.
[25] Chamarthi P., Pawan Chhetri, Vivek Agarwal, Simplified Implementation scheme for Space Vector Pulse Width Modulation of n-level Inverter with Online Computation of Optimal Switching Pulse Durations, IEEE Transactions on Industrial Electronics, vol. 63, no. 11, pp. 1631–1639 (2016), DOI: 10.1109/TIE.2016.2586438.
[26] Yi Deng, YebinWang, Koon Hoo Teo, Harley R.G., A Simplified Space Vector Modulation Scheme for Multilevel Converters, IEEE Transactions on Power Electronics, vol. 31, no. 3, pp. 1873–1886 (2016), DOI: 10.1109/TPEL.2015.2429595.
[27] Kumar A.S., Gowri K.S., Kumar M.V., New generalized SVPWM algorithm for multilevel inverters, Journal of Power Electronics, vol. 18, no. 4, pp. 1027–1036 (2018), DOI: 10.6113/JPE.2018.18.4.1027.
[28] Kumar A.S., Gowri K.S., Kumar M.V., Performance study of various discontinuous PWM strategies for multilevel inverters using generalized space vector algorithm, Journal of Power Electronics, vol. 20, no. 1, pp. 100–108 (2020), DOI: 10.1007/s43236-019-00010-9.
[29] Kumar A.S., Gowri K., Kumar M.V., Decomposition based New Space Vector Algorithm for Three Level Inverter with various ADSVPWM strategies, Journal of Circuits, Systems and Computers, vol. 29, no. 06, 2050090 (2020), DOI: 10.1142/S0218126620500905.

[1] Gomes A.D.P.S., Cagil Ozansoy, Anwaar Ulhaq, High sensitivity vegetation high-impedance fault detection based on signal’s high- frequency contents, IEEE Transactions on Power Delivery, vol. 33, no. 3, pp. 1398–1407 (2018), DOI: 10.1109/TPWRD.2018.2791986.
[2] Ghaderi H.L., Ginn I., Mohammadpour H.A., High impedance fault detection: A review, Electric Power Systems Research, vol. 143, pp. 376–388 (2017), DOI: 10.3390/en13236447.
[3] Gautam S., Brahma S.M., Detection of high impedance fault in power distribution systems using mathematical morphology, IEEE Transactions on Power Systems, vol. 28, no. 2, pp. 1226–1234 (2013), DOI: 10.1109/TPWRS.2012.2215630.
[4] Sarlak M., Shahrtash S.M., High impedance fault detection using combination of multi-layer perceptron neural networks based on multiresolution morphological gradient features of current waveform, IET Generation, Transmission Distribution, vol. 5, no. 5, pp. 588–595 (2011), DOI: 10.1049/ietgtd.2010.0702.
[5] Ling Liu, Fault detection technology for intelligent boundary switch, Archives of Electrical Engineering, vol. 68, no. 3, pp. 657–666 (2019), DOI: 10.24425/aee.2019.129348.
[6] Milioudis N., Andreou G.T., Labridis D.P., Detection and Location of High Impedance Faults in Multiconductor Overhead Distribution Lines Using Power Line Communication Devices, IEEE Transactions on Smart Grid, vol. 6, no. 2, pp. 894–902 (2015), DOI: 10.1109/TSG.2014.2365855.
[7] Chaari O., Meunier M., Brouaye F., Wavelets: A new tool for the resonant grounded power distribution systems relaying, IEEE Trans on Power System Delivery, vol. 12, no. 1, pp. 1–8 (2018), DOI: 10.1109/61.517484.
[8] Mudathir Funsho Akorede, James Katende, Wavelet Transform Based Algorithm for High- Impedance Faults Detection in Distribution Feeders, European Journal of Scientific Research, vol. 41, no. 2, pp. 237–247 (2010).
[9] Douglas G., Cagil O., Anwaar U., High-Sensitivity Vegetation High-Impedance Fault Detection Based on Signal’s High-Frequency Contents, IEEE Transactions on Power Delivery, vol. 33, no. 3, pp. 1398–1407 (2018), DOI: 10.1109/TPWRD.2018.2791986.
[10] Suliman M.Y., A Proposal Technique of High Impedance Fault Detection Using Adaptive Neuro-Fuzzy Logic Control, Engineering and Technology Journal, vol. 34A, no. 11, pp. 2086–2095 (2016).
[11] Girgis A., ChangW., Makram E.B., Analysis of high-impedance fault generated signals using a Kalman filtering approach, IEEE Transactions on Power Delivery, vol. 5, no. 4, pp. 1714–1724 (1990), DOI: 10.1109/61.103666.
[12] Suliman M.Y., Sameer Sadoon Al-Juboori, Design of Fast Real Time Controller for the Dynamic Voltage Restorer Based on Instantaneous Power Theory, International Journal of Energy and Power Engineering, vol. 5, iss. 2:1, pp. 1–6 (2016), DOI: 10.11648/j.ijepe.s.2016050201.11.
[13] Kumar R., Bhim S., Shahani D.T., Chinmay J., Method of earth fault loop impedance measurement without nuisance tripping of RCDs in 3-phase low-voltage circuits, Archives of Electrical Engineering, vol. 26 no. 2, pp. 217–227 (2019), DOI: 10.24425/mms.2019.128350.
[14] Suliman M.Y., Ghazal M., Design and Implementation of Overcurrent Protection Relay, Journal of Electrical Engineering and Technology, vol. 15, pp. 1595–1605 (2020), DOI: 10.1007/s42835-020-00447-0.
[15] Sirojan T., Lu S., Phung B.T., Zhang D., Ambikairajah E., High Impedance Fault Detection by Convolutional Deep Neural Network, IEEE International Conference on High Voltage Engineering and Application (ICHVE), Athens, Greece, pp. 1–4 (2018), DOI: 10.1109/ICHVE.2018.8642080.
[16] Suliman M.Y., Ghazal M.T., Detection of High impedance Fault in Distribution Network Using Fuzzy Logic Control, 2nd International Conference on Electrical, Communication, Computer, Power and Control Engineering (ICECCPCE), Mosul, Iraq, pp. 103–108 (2019), DOI: 10.1109/ICECCPCE46549.2019.203756.
[17] Sekar K., Mohanty N.K., Sahoo A.K., High impedance fault detection using wavelet transform, Technologies for Smart-City, Energy Security and Power, (ICSESP), Bhubaneswar, India, pp. 1–6 (2018), DOI: 10.1109/ICSESP.2018.8376740.
[18] Gabriel de Alvarenga Ferreira, Tatiana Mariano Lessa Assis, A Novel High Impedance Arcing Fault Detection Based on the Discrete Wavelet Transform for Smart Distribution Grids, IEEE PES Innovative Smart Grid Technologies Conference – ISGT, Brazil, pp. 1–6 (2019), DOI: 10.1109/ISGTLA.2019.8895264.
[19] Moloi K., Jordaan J.A., Hamam Y., High impedance fault detection technique based on Discrete Wavelet Transform and support vector machine in power distribution networks, IEEE AFRICON, Cape Town, South Africa, pp. 9–14 (2017), DOI: 10.1109/AFRCON.2017.8095447.
[20] Costa F.B., Souza B.A., Brito N.S.D., Silva J.A.C.B., Santos W.C., Real-Time Detection of Transient Induced by High-Impedance Fault Based on the Boundary Wavelet Transform, IEEE Transaction on Industrial Applications, vol. 51, no. 6, pp. 531–5323 (2015), DOI: 10.1109/TIA.2015.2434993.
[21] ElkalashyN.I., Lehtonen M., Hatem A.D.,Abdel-Maksoud I.T., Mohamed A.I.,DWT-Based Extraction of Residual Currents Throughout Unearthed MV Network For Detecting High Impedance Fault Due to Learning Trees, European Transactions on Electrical Power, ETEP, vol. 17, no. 6, pp. 597–614 (2007), DOI: 10.1002/etep.149.
[22] Yang H., Minyou C., Jinqian Z., High impedance fault identification method of the distribution network based on discrete wavelet transformation, International Conference on Electrical and Control Engineering, Yichang, China, pp. 2262–2265 (2011), DOI: 10.1109/ICECENG.2011.6057329.
[23] Jang J.-S.R., ANFIS: adaptive-network-based fuzzy inference system, IEEE Transactions on Systems, Man and Cybernetics, vol. 23, no. 3, pp. 665–685 (1993), DOI: 10.1109/21.256541.
[24] Zadeh L., Fuzzy sets, Information and Control, New York, vol. 8, pp. 338–353 (1965), DOI: 10.1016/S0019-9958(65)90241-X.
[25] Werbos P.J., Beyond regression: new tools for prediction and analysis in the behavioural sciences, Ph.D. Thesis, Harvard University, Cambridge, USA (1974).
[26] Mohammed Y. Suliman, Farrag M.E., Bashi S.M., Design of Fast Real Time Controller for the SSSC Based on Takagi-Sugeno (TS) Adaptive Neuro-Fuzzy Control System, International Conference on Renewable Energy and Power Quality, Spain, vol. 1, no. 12, pp. 1025–1030 (2014), DOI: 10.24084/repqj12.575.
[27] Suliman M.Y., Active and reactive power flow management in parallel transmission lines using static series compensation (SSC) with energy storage, International Journal of Electrical and Computer Engineering, vol. 9, no. 6, pp. 4598–4609 (2019), DOI: 10.11591/ijece.v9i6.pp4598-4609.
[28] Mohammed Y. Suliman, Mahmood T. Al-Khayyat, Power flow control in parallel transmission lines based on UPFC, Bulletin of Electrical Engineering and Informatics, vol. 9, no. 5, pp. 1755–1765 (2020), DOI: 10.11591/eei.v9i5.2290.
[29] Banu G., Suja S., Fault location technique using GA-ANFIS for UHV line, Archives of Electrical Engineering, vol. 63, no. 2, pp. 247–262 (2014), DOI: 10.2478/aee-2014-0019.
[30] Al-Khayyat M.T., Suliman M.Y., Neuro Fuzzy based SSSC for Active and Reactive Power Control in AC Lines with Reduced Oscillation, Przeglad Elektrotechniczny, vol. 97, no. 3, pp. 75–79, 2021, DOI: 10.15199/48.2021.03.14.

[1] Gan V.J.L., Lo I.M.C., Ma J., Tse K.T., Cheng J.C.P., Chan C.M., Simulation optimisation towards energy efficient green buildings: Current status and future trends, Journal of Cleaner Production, Elsevier Ltd, vol. 254, p. 120012 (2020), DOI: 10.1016/j.jclepro.2020.120012.
[2] Ericsson, 10 hot consumer trends 2030 (2019), https://www.ericsson.com/en/reports-and-papers/consumerlab/reports/10-hot-consumer-trends-2030, accessed December 29, 2020.
[3] Ramadan R.A., Vasilakos A.V., Brain computer interface: control signals review, Neurocomputing, vol. 223, pp. 26–44 (2017), DOI: 10.1016/j.neucom.2016.10.024.
[4] Donoghue J.P., Connecting cortex to machines: Recent advances in brain interfaces, Nature Neuroscience, Nature Publishing Group, vol. 5, no. 11s, pp. 1085–1088 (2002), DOI: 10.1038/nn947.
[5] Schwartz A.B., Cortical neural prosthetics, Annual Review of Neuroscience, vol. 27, Annual Reviews, pp. 487–507 (2004), DOI: 10.1146/annurev.neuro.27.070203.144233.
[6] Nicolas-Alonso L.F., Gomez-Gil J., Brain computer interfaces, a review, Sensors, vol. 12, no. 2, pp. 1211–1279 (2012), DOI: 10.3390/s120201211.
[7] Jafar M.R., Nagesh D.T., A beginner’s guide to Brain Machine Interface – Review, SSRN, pp. 6–10 (2020), DOI: 10.2139/ssrn.3645960.
[8] Shi K., GaoN., Li Q., Bai O., A P300 brain-computer interface design for virtual remote control system, 2017 3rd IEEE International Conference on Control Science and Systems Engineering, ICCSSE 2017, pp. 326–329 (2017), DOI: 10.1109/CCSSE.2017.8087950.
[9] Birbaumer N., Brain-computer-interface research: Coming of age, Clinical Neurophysiology, vol. 117, no. 3, pp. 479–483 (2006), DOI: 10.1016/j.clinph.2005.11.002.
[10] Marx S. et al., Validation of mobile eye-tracking as novel and efficient means for differentiating progressive supranuclear palsy from Parkinson’s disease, Frontiers in Behavioral Neuroscience, vol. 6, no. DEC (2012), DOI: 10.3389/fnbeh.2012.00088.
[11] Birbaumer N., Cohen L.G., Brain-computer interfaces: Communication and restoration of movement in paralysis, in Journal of Physiolog., vol. 579, no. 3, pp. 621–636 (2007), DOI: 10.1113/jphysiol.2006.125633.
[12] Bhemjibhaih D.P., Sanjay G.D., Sreejith V., Prakash B., Brain-computer interface based home automation system for paralysed people, 2018 IEEE Recent Advances in Intelligent Computational Systems (RAICS 2018), pp. 230–233 (2019), DOI: 10.1109/RAICS.2018.8635060.
[13] Gao X., Xu D., Cheng M., Gao S., A BCI-based environmental controller for the motion-disabled, IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol. 11, no. 2, pp. 137–140 (2003), DOI: 10.1109/TNSRE.2003.814449.
[14] Daly J.J., Huggins J.E., Brain-computer interface: Current and emerging rehabilitation applications, Archives of Physical Medicine and Rehabilitation, W.B. Saunders, vol. 96, no. 3., pp. S1–S7 (2015), DOI: 10.1016/j.apmr.2015.01.007.
[15] Bonneau L., Ramahandry V., Probst T., Pedersen L., Dakkak-Arnoux B., Smart Building: Energy Efficiency Application (2017).
[16] Minh K.N., Van D.L., Duc T.D., An T.N., An advanced IoT system for monitoring and analysing chosen power quality parameters in micro-grid solution, Archives of Electrical Engineering, vol. 70, no. 1, pp. 173–188 (2021), DOI: 10.24425/aee.2021.136060.
[17] Hannan M.A. et al., A review of internet of energy based building energy management systems: Issues and recommendations, IEEE Access, vol. 6, pp. 38997–39014 (2018), DOI: 10.1109/ACCESS.2018.2852811.
[18] Minoli D., Sohraby K., Occhiogrosso B., IoT Considerations, Requirements, and Architectures for Smart Buildings-Energy Optimization and Next-Generation Building Management Systems, IEEE Internet of Things Journal, vol. 4, no. 1, pp. 269–283 (2017), DOI: 10.1109/JIOT.2017.2647881.
[19] Kastner W., Neugschwandtner G., Soucek S., Newman H.M., Communication systems for building automation and control, Proceedings of the IEEE, vol. 93, no. 6, pp. 1178–1203 (2005), DOI: 10.1109/JPROC.2005.849726.
[20] Wang M., Qiu S., Dong H., Wang Y., Design an IoT-based building management cloud platform for green buildings, Proceedings – 2017 Chinese Automation Congress, CAC 2017, vol. 2017, January, pp. 5663–5667 (2017), DOI: 10.1109/CAC.2017.8243793.
[21] Lilis G., Conus G., Kayal M., A distributed, event-driven building management platform on web technologies, Proceedings of 1st International Conference on Event-Based Control, Communication and Signal Processing, EBCCSP 2015 (2015), DOI: 10.1109/EBCCSP.2015.7300702.
[22] Ahmad M.W., Mourshed M., Yuce B., Rezgui Y., Computational intelligence techniques for HVAC systems: A review, Building Simulation, vol. 9, no. 4, pp. 359–398 (2016), DOI: 10.1007/s12273-016-0285-4.
[23] Chen Z., Xu P., Feng F., Qiao Y., LuoW., Data mining algorithm and framework for identifying HVAC control strategies in large commercial buildings, Building Simulation, vol. 14, no. 1, pp. 63-74 (2021), DOI: 10.1007/s12273-019-0599-0.
[24] Sun F., Yu J., Indoor intelligent lighting control method based on distributed multi-agent framework, Optik, vol. 213, no. March, p. 164816 (2020), DOI: 10.1016/j.ijleo.2020.164816.
[25] Khanchuea K., Siripokarpirom R., A Multi-Protocol IoT Gateway and WiFi/BLE Sensor Nodes for Smart Home and Building Automation: Design and Implementation, 2019 10th International Conference of Information and Communication Technology for Embedded Systems (IC-ICTES), pp. 1–6 (2019), DOI: 10.1109/ICTEmSys.2019.8695968.
[26] Anwar F., Boby R.I., Rashid M.M., Alam M.M., Shaikh Z., Network-Based Real-time Integrated Fire Detection and Alarm (FDA) System with Building Automation, IOP Conference Series: Materials Science and Engineering, vol. 260, no. 1 (2017), DOI: 10.1088/1757-899X/260/1/012025.
[27] Luo R.C., Lin S.Y., Su K.L., A multiagent multisensor based security system for intelligent building, IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems, vol. 2003-January, pp. 311–316 (2003), DOI: 10.1109/MFI-2003.2003.1232676.
[28] Hui H., Ding Y., Shi Q., Li F., Song Y., Yan J., 5G network-based Internet of Things for demand response in smart grid: A survey on application potential, Applied Energy, vol. 257, p. 113972 (2020), DOI: 10.1016/j.apenergy.2019.113972.
[29] Chauhan R.K., Chauhan K., Building automation system for grid-connected home to optimize energy consumption and electricity bill, Journal of Building Engineering, vol. 21, no. May 2018, pp. 409-420 (2019), DOI: 10.1016/j.jobe.2018.10.032.
[30] Afroz Z., Shafiullah G.M., Urmee T., Higgins G., Modeling techniques used in building HVAC control systems: A review, Renewable and Sustainable Energy Reviews, vol. 83, pp. 64–84, Elsevier Ltd (2018), DOI: 10.1016/j.rser.2017.10.044.
[31] Amana H.A.C., ASXC16 Air Conditioner Best Suited For Homes|Amana (2021), https://www.amanahac.com/products/air-conditioners/16-seer-asxc16, accessed March 23, 2021.
[32] Goodman, Air Conditioner/GSXC18/Up To 18 SEER/Goodman, 2021, https://www.goodmanmfg.com/products/air-conditioners/18-seer-dsxc18, accessed March 23, 2021.
[33] Bryant, Two stage air conditioners – air conditioners/Bryant (2021), https://www.bryant.com/en/us/products/air-conditioners/189bnv, accessed March 23, 2021.
[34] Trane, Air Conditioner/$400 Rebate on Quietest AC/Trane®Cooling (2021), https://www.trane.com/residential/en/products/air-conditioners/xv18-air-conditioners, accessed March 23, 2021.
[35] Cheng Y., Fang C., Yuan J., Zhu L., Design and application of a smart lighting system based on distributed wireless sensor networks, Applied Sciences, Switzerland, vol. 10, no. 23, pp. 1–21 (2020), DOI: 10.3390/app10238545.
[36] Kaminska A., Ozadowicz A., Lighting control including daylight and energy efficiency improvements analysis, Energies, vol. 11, no. 8 (2018), DOI: 10.3390/en11082166.
[37] Toub M., Reddy C.R., Robinett R.D., Shahbakhti M., Integration and Optimal Control of MicroCSP with Building HVAC Systems: Review and Future Directions, Energies, vol. 14, no. 3, p. 730 (2021), DOI: 10.3390/en14030730.
[38] Kang J., Han J., Park J.H., Design of IP camera access control protocol by utilizing hierarchical group key, Symmetry, vol. 7, no. 3, pp. 1567–1586 (2015), DOI: 10.3390/sym7031567.
[39] Froiz-Míguez I., Fernández-Caramés T.M., Fraga-Lamas P., Castedo L., Design, implementation and practical evaluation of an iot home automation system for fog computing applications based on MQTT and ZigBee-WiFi sensor nodes, Sensors, Switzerland, vol. 18, no. 8, pp. 1–42 (2018), DOI: 10.3390/s18082660. [40] KNX Association KNX Association [official website] (2020), https://www.knx.org/knx-en/forprofessionals/index.php, accessed January 06, 2021.
[41] Tran T.N., Grid Search of Convolutional Neural Network model in the case of load forecasting, Archives of Electrical Engineering, vol. 70, no. 1, pp. 25–36 (2021), DOI: 10.24425/aee.2021.136050.
[42] Prashant P., Joshi A., GandhiV., Brain computer interface: A review, (2016), DOI: 10.1109/NUICONE.2015.7449615.
[43] Lee S., Shin Y., Woo S., Kim K., Lee H.-N., Review of Wireless Brain-Computer Interface Systems, Brain-Computer Interface Systems – Recent Progress and Future Prospects (2013), DOI: 10.5772/56436.
[44] Hall J.E., Guyton and Hall Textbook of Medical Physiology, Saunders, vol. 13 (2015).
[45] Wolpaw J.R., Birbaumer N., McFarland D.J., Pfurtscheller G., Vaughan T.M., Brain-computer interfaces for communication and control, Clinical Neurophysiology, Elsevier, vol. 113, no. 6, pp. 767–791 (2002), DOI: 10.1016/S1388-2457(02)00057-3.
[46] Laureys S., Boly M., Tononi G., Functional neuroimaging in The Neurology of Consciousness, pp. 31–42 (2009), DOI: 10.1016/B978-0-12-374168-4.00003-4.
[47] Sanei S., Chambers J.A., EEG Signal Processing (2007).
[48] Baillet S., Mosher J.C., Leahy R.M., Electromagnetic brain mapping, IEEE Signal Processing Magazine, vol. 18, no. 6, pp. 14–30 (2001), DOI: 10.1109/79.962275.
[49] Kübler A., Kotchoubey B., Kaiser J., Birbaumer N., Wolpaw J.R., Brain-computer communication: Unlocking the locked, Psychological Bulletin, vol. 127, no. 3, pp. 358–375 (2001), DOI: 10.1037/0033- 2909.127.3.358.
[50] Anand B.K., Chhina G.S., Singh B., Some aspects of electroencephalographic studies in Yogis, Electroencephalography and Clinical Neurophysiology, vol. 13, no. 3, pp. 452–456 (1961), DOI: 10.1016/0013-4694(61)90015-3.
[51] Aftanas L.I., Golocheikine S.A., Human anterior and frontal midline theta and lower alpha reflect emotionally positive state and internalized attention: High-resolution EEG investigation of meditation, Neuroscience Letters, vol. 310, no. 1, pp. 57–60 (2001), DOI: 10.1016/S0304-3940(01)02094-8.
[52] Kübler A., Neumann N., Wilhelm B., Hinterberger T., Birbaumer N., Predictability of braincomputer communication, Journal of Psychophysiology, vol. 18, no. 2–3, pp. 121–129 (2004), DOI: 10.1027/0269-8803.18.23.121.
[53] Ortiz V.H., Tapia J.J., Mathematical model for classification of EEG signals, Optics and Photonics for Information Processing IX, vol. 9598, no. September 2015, p. 95981C (2015), DOI: 10.1117/12.2187092.
[54] EMOTIV/Brain Data Measuring Hardware and Software Solutions (2020), https://www.emotiv.com, accessed January 06, 2021.
[55] EEG – ECG – Biosensors (2020), http://neurosky.com, accessed January 06, 2021.
[56] MuseTM – Meditation Made Easy with the Muse Headband (2020), https://choosemuse.com, accessed January 06, 2021.
[57] OpenBCI – Open Source Biosensing Tools (EEG, EMG, EKG, and more) (2020), https://openbci.com, accessed January 06, 2021.
[58] DSI Series Dry EEG Headsets – Wearable Sensing (2020), https://wearablesensing.com, accessed January 06, 2021.
[59] ANT Neuro inspiring technology for the human brain (2020), https://www.ant-neuro.com, accessed January 06, 2021.
[60] Reinventing brain health, Neuroelectrics (2020), https://www.neuroelectrics.com, accessed January 06, 2021.
[61] Fully mobile EEG devices mBrainTrain, Home new (2020), https://mbraintrain.com, accessed January 06, 2021.
[62] Advanced Brain Monitoring (2020), https://www.advancedbrainmonitoring.com, accessed January 06, 2021.
[63] Dry EEG Headset, CGX, United States (2020), https://www.cgxsystems.com/home-old, accessed January 06, 2021.
[64] Ghodake A.A., Shelke S.D., Brain controlled home automation system (2016), DOI: 10.1109/ISCO.2016.7727050.
[65] Lee W.T., Nisar H., Malik A.S., Yeap K.H., A brain computer interface for smart home control, Proceedings of the International Symposium on Consumer Electronics, ISCE (2013), pp. 35–36, DOI: 10.1109/ISCE.2013.6570240.
[66] Holzner C., Guger C., Edlinger G., Grönegress C., Slater M., Virtual smart home controlled by thoughts, Proceedings of the Workshop on Enabling Technologies: Infrastructure for Collaborative Enterprises, WETICE 2009, pp. 236–239 (2009), DOI: 10.1109/WETICE.2009.41.
[67] Edlinger G., Holzner C., Guger C., Groenegress C., Slater M., Brain-computer interfaces for goal orientated control of a virtual smart home environment, 2009 4th International IEEE/EMBS Conference on Neural Engineering, NER’09, pp. 463–465 (2009), DOI: 10.1109/NER.2009.5109333.
[68] Alrajhi W., Alaloola D., Albarqawi A., Smart home: Toward daily use of BCI-based systems (2017), DOI: 10.1109/ICIHT.2017.7899002.
[69] Alshbatat A.I.N., Vial P.J., Premaratne P., Tran L.C., EEG-based Brain-computer Interface for Automating Home Appliances, Journal of Computers, vol. 9, no. 9 (2014), DOI: 10.4304/jcp.9.9.2159-2166.
[70] Virdi P., Syal P., Kumari P., Home automation control system implementation using SSVEP based brain computer interface, Proceedings of the International Conference on Inventive Computing and Informatics, ICICI 2017, pp. 1068–1073 (2018), DOI: 10.1109/ICICI.2017.8365304.
[71] Boucha D., Amiri A., Chogueur D., Controlling electronic devices remotely by voice and brain waves, Proceedings of the 2017 International Conference on Mathematics and Information Technology, ICMIT 2017, pp. 38–42 (2018), DOI: 10.1109/MATHIT.2017.8259693.
[72] Putze F., Weib D., Vortmann L.M., Schultz T., Augmented reality interface for smart home control using SSVEP-BCI and eye gaze, Conference Proceedings – IEEE International Conference on Systems, Man and Cybernetics, pp. 2812–2817 (2019), DOI: 10.1109/SMC.2019.8914390.
[73] Kosmyna N., Tarpin-Bernard F., Bonnefond N., Rivet B., Feasibility of BCI control in a realistic smart home environment, Frontiers in Human Neuroscience, vol. 10, p. 10 (2016), DOI: 10.3389/fnhum.2016.00416.
[74] Cortez S.A., Flores C., Andreu-Perez J., A Smart Home Control Prototype Using a P300-Based Brain– Computer Interface for Post-stroke Patients, Smart Innovation, Systems and Technologies, vol. 202, pp. 131–139 (2021), DOI: 10.1007/978-3-030-57566-3_13.
[75] Miah M.O., Khan S.S., Shatabda S., Al Mamun K.A., Farid D.M., Real-Time EEG Classification of Voluntary Hand Movement Directions using Brain Machine Interface, Proceedings of 2019 IEEE Region 10 Symposium, TENSYMP 2019, pp. 473–478 (2019), DOI: 10.1109/TENSYMP46218.2019.8971255.
[76] Käthner I. et al., A P300 BCI for e – inclusion, cognitive rehabilitation and smart home control, pp. 60–63 (2014), DOI: 10.3217/978-3-85125-378-8-15.
[77] Edlinger G., Holzner C., Guger C., A hybrid brain-computer interface for smart home control, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), vol. 6762 LNCS, no. PART 2, pp. 417–426 (2011), DOI: 10.1007/978-3- 642-21605-3_46.
[78] Kim H.J., Lee M.H., Lee M., A BCI based Smart Home System Combined with Event-related Potentials and Speech Imagery Task (2020), DOI: 10.1109/BCI48061.2020.9061634.
[79] Park S., Cha H.S., Im C.H., Development of an Online Home Appliance Control System Using Augmented Reality and an SSVEP-Based Brain-Computer Interface, IEEE Access, vol. 7, pp. 163604– 163614 (2019), DOI: 10.1109/ACCESS.2019.2952613.
[80] Vaughan T.M. et al., The wadsworth BCI research and development program: At home with BCI, IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol. 14, no. 2, pp. 229–233 (2206), DOI: 10.1109/TNSRE.2006.875577.
[81] Qin L.Y. et al., Smart home control for disabled using brain computer interface, International Journal of Integrated Engineering, vol. 12, no. 4, pp. 74–82 (2020), DOI: 10.30880/ijie.2019.11.06.004.
[82] Dobosz K., Wittchen P., Brain-computer interface for mobile devices, Journal of Medical Informatics and Technologies, vol. 24, pp. 215–222 (2015).
[83] Kawa B., Borkowski P., Data analysis of the latency in the building with using telecommunication technology, Przegl˛ad Elektrotechniczny, vol. 1, no. 2, pp. 131–137 (2021), DOI: 10.15199/48.2021.02.28.

[1] Xu Z., Tu Q.R., Guan M.Y. et al., Voltage source converter based HVDC power transmission systems, China Machine Press, pp. 1–25 (2013).
[2] María José Pérez Molina, Dunixe Marene Larruskain, Pablo Eguía López et al., Analysis of Local Measurement-Based Algorithms for Fault Detection in a Multi-Terminal HVDC Grid, Energies, vol. 12, no. 24, pp. 1–20 (2019), DOI: 10.3390/en12244808.
[3] Li X.Q., Song Q., Liu W.H. et al., Protection of Nonpermanent Faults on DC Overhead Lines in MMC-Based HVDC Systems, IEEE Transactions on Power Delivery, vol. 28, no. 1, pp. 483–490 (2012), DOI: 10.1109/TPWRD.2012.2226249.
[4] Li B., Li Y., He J., DC Fault Handling Scheme for the MMC-based DC System, Proceedings of the CSEE, vol. 36, no. 7, pp. 1944–1950 (2016), DOI: 10.13334/j.0258-8013.pcsee.2016.07.022.
[5] Pan Y., Chen L.X., Yuan Z. et al., Research on Current Limiting and Energy Limiting Technology for DC Power Grid Fault, Proceedings of the CSEE, vol. 40, no. 06, pp. 2006–2016 (2020), DOI: 10.13334/j.0258-8013.pcsee.191833.
[6] Mokhberdoran A., Carvalho A., Silva N. et al., Application study of superconducting fault current limiters in meshed HVDC grids protected by fast protection relay, Electric Power Systems Research, vol. 143, pp. 292–302 (2017), DOI: 10.1016/j.epsr.2016.09.008.
[7] Sanusi W., Al Hosani M., El Moursi M., A novel DC fault ride-through scheme for MTDC Networks connecting large-scale wind parks, IEEE Transaction on Sustainable Energy, vol. 8, no. 3, pp. 1086–1095 (2017), DOI: 10.1109/TSTE.2017.2651025.
[8] Zhou G.Y., Han M.X., Huang W.D., Flexible DC Transmission Fault Protection Strategy Based on Coordination of Current Limiter and Circuit Breaker, Journal of Global Energy Interconnection, vol. 1, no. 05, pp. 594–602 (2018), DOI: 10.19705/j.cnki.issn2096-5125.2018.05.009.
[9] Xing C., Xi X.Z., Liu M.Q., Li S., Study on Optimal Configuration of Current Limiter in HVDC Grid, Journal of Power Supply (2019), DOI: 10.1109/IGBSG.2019.8886310.
[10] Ying L.Z., Liu T.Q., Wang J.Q., Global optimization algorithm for fault current limiter configuration based on rearranged particle swarm optimization, Electric Power Automation Equipment, vol. 38, no. 02, pp.145–152 (2018), DOI: 10.16081/j.issn.1006-6047.2018.02.019.
[11] Li Y., Gong Y.F., Optimal Design Scheme of Current Limiting Reactor for Multi-terminal DC Power Grid, Automation of Electric Power Systems, vol. 42, no. 23, pp. 120–126 (2018).
[12] Li C.Y., Zhao C.Y., Xu J.Z. et al., A pole-to-pole short-circuit fault current calculation method for DC grids, IEEE Transactions on Power Systems, vol. 32, no. 6, pp. 4943–4953 (2017), DOI: 10.1109/TPWRS.2017.2682110.
[13] Guo X.Q., Cui X., Qi L. et al., DC short-circuit fault analysis and protection for the overhead line bipolar MMC-HVDC system, Proceedings of the CSEE, vol. 37, no. 8, pp. 2177–2184 (2017), DOI: 10.13334/j.0258-8013.pcsee.162229.
[14] Dantas R., Liang J., Ugalde-Loo C.E. et al., Progressive fault isolation and grid restoration strategy for MTDC networks, IEEE Transactions on Power Delivery, vol. 33, no. 2, pp. 909–918 (2018), DOI: 10.1109/TPWRD.2017.2720844.
[15] Tang G.F., Wang G.Y., He Z.Y. et al., Research on key technology and equipment for Zhangbei 500 kV DC grid, High Voltage Engineering, vol. 44, no. 7, pp. 2097–2106 (2018), DOI: 10.13336/j.1003-6520.hve.20180628001.
[16] Lu W., Wang W.J., Fang T.X. et al., Test technology of hybrid HVDC circuit breaker, High Voltage Engineering, vol. 44, no. 5, pp. 1685–1691 (2018), DOI: 10.13336/j.1003-6520.hve.20180430038.
[17] Li C., Li Y., Guo J., He P., Research on emergency DC power support coordinated control for hybrid multi-infeed HVDC system, Archives of Electrical Engineering, vol. 69, no. 1, pp. 5–21 (2020), DOI: 10.24425/aee.2020.131755.
[18] Liu J., Tai N.L., Fan C.J. et al., A hybrid current-limiting circuit for DC line fault in multi-terminal VSC-HVDC system, IEEE Transactions on Industrial Electronics, vol. 64, no. 7, pp. 5595–5607 (2017), DOI: 10.1109/TIE.2017.2677311.
[19] Tang S., Jia G.L., Zhang H. et al., Topology of DC Circuit Breaker with Pre-current-limiting Capability for DC Grid, Automation of Electric Power Systems, vol. 44, no. 11, pp. 152–168 (2020).
[20] Peng C., Song X., Huang A.Q. et al., A medium-voltage hybrid DC circuit breaker, IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 5, iss. 1, pp. 289–296 (2017), DOI: 10.1109/JESTPE.2016.2609391.
[21] Han X., Sima W., Yang M. et al., Transient characteristics underground and short-circuit faults in a +- 500 kV MMC-based HVDC system with hybrid DC circuit breakers, IEEE Transactions on Power Delivery, vol. 33, no. 3, pp. 1378–1387 (2018), DOI: 10.1109/TPWRD.2018.2795800.
[22] Du X.L., Guo Q.L., Wu Y.K. et al., Research on control system structure and coordination control strategy for Zhangbei Demonstration Project of MMC-HVDC Grid, Power System Protection and Control, vol. 9, pp. 164–173 (2018), DOI: 10.19783/j.cnki.pspc.190607.
[23] Guo X.S., Li T., Li G.W. et al., Optimization of fault ride-through strategy and protection setting value of convert valve for Zhangbei VSC-HVDC transmission system, Automation of Electric Systems, vol. 42, no. 24, pp. 196–205 (2018).
[24] Wei X.W., Su S.P., Qiu X. et al., A Novel Optimized Capacitor Voltage Balancing Method for Modular Multilevel Converter, Power System Technology, vol. 41, no. 03, pp. 729–735 (2017), DOI: 10.13335/j.1000-3673.pst.2016.1301.
[25] ShiW., Cao D.M.,Yang B. et al., 500 kV commutation-based hybrid HVDC circuit breaker, Automation of Electric Power Systems, vol. 42, no. 7, pp. 102–107 (2018), DOI: CNKI:SUN:DLXT.0.2018-07-014.

[1] Sharif A., Raza S.A., Ozturk I., Afshan S., The dynamic relationship of renewable and nonrenewable energy consumption with carbon emission: a global study with the application of heterogeneous panel estimations, Renewable Energy, vol. 133, pp. 685–691 (2019), DOI: 10.1016/j.renene.2018.10.052.
[2] Ossowska L.J., Janiszewska D.A., Toward sustainable energy consumption in the European Union, Archives of Electrical Engineering, vol. 23, no. 1, pp. 37–48 (2020), DOI: 10.33223/epj/119371.
[3] Zhang W.Q., Zhang X.Y., Huang S.W., Xia Y.K., Fan X.C., Evolution of a transmission network with high proportion of renewable energy in the future, Renewable Energy, vol. 102, pp. 372–379 (2017), DOI: 10.1016/j.renene.2016.10.057.
[4] Zhou Q., Wang N.B., Shen C.Y., Zhao L., Wang D.M., Zhang J.M., Analysis of the reasons and prospect for the abandonment of new energy power in China, Proceedings of the 2016 5th International Conference on Energy and Environmental Protection, Shenzhen, China (2016).
[5] Tang Z.Y., Hill D.J., Liu T., Two-stage voltage control of subtransmission networks with high penetration of wind power, Control Engineering Practice, vol. 62, pp. 1–10 (2017), DOI: 10.1016/j.conengprac.2017.02.013.
[6] da Costa J.N., Passos J.A., Henriques R.M., Loading margin sensitivity analysis in systems with significant wind power generation penetration, Electric Power Systems Research, vol. 175, pp. 1–9 (2019), DOI: 10.1016/j.epsr.2019.105900.
[7] Cai Y., Wang Z.C., Li Y., Cao Y.J., Tan Y.D., Tang X., A novel operation of regional power grids in china: the generator voltage-class-reduction scheme, IEEE Access, vol. 7, pp. 132841–132850 (2019), DOI: 10.1109/ACCESS.2019.2939925.
[8] Kumar V.S.S., Reddy K.K., Thukaram D., Coordination of reactive power in grid-connected wind farms for voltage stability enhancement, IEEE Transactions on Power Systems, vol. 29, pp. 2381–2390 (2014), DOI: 10.1109/TPWRS.2014.2300157.
[9] Liu Q.J., Yu L.F., Li Z.H., Zeng J., Chen S.Y., Regional grid voltage reactive power optimization strategy based on voltage qualification rate evaluation function, 2018 International Conference on Power System Technology, Guangzhou, China, pp. 3875–3882 (2018).
[10] Mahela O.P., Khan B., Alhelou H.H., Siano P., Power quality assessment and event detection in distribution system with wind energy penetration using S-transform and fuzzy clustering, IEEE Transactions on Industrial Informatics, vol. 16, no. 11, pp. 6922–6932 (2020), DOI: 10.1109/TII.2020.2971709.
[11] Mahela O.P., Khan B., Alhelou H.H., Tanwar S., Assessment of power quality in the utility grid integrated with wind energy generation, IET Power Electronics, vol. 13, no. 13, pp. 2917–2925 (2020), DOI: 10.1049/iet-pel.2019.1351.
[12] Swain S., Ray P.K., Short circuit fault analysis in a grid connected DFIG based wind energy system with active crowbar protection circuit for ride through capability and power quality improvement, International Journal of Electrical Power and Energy System, vol. 84, pp. 64–75 (2017), DOI: 10.1016/j.ijepes.2016.05.006.
[13] Wang S.X., Ge L.J., Cai S.X., Wu L., Hybrid interval AHP-entropy method for electricity user evaluation in smart electricity utilization, Journal of Modern Power Systems and Clean Energy, vol. 6, pp. 701–711 (2018), DOI: 10.1007/s40565-017-0355-3.
[14] Huang Y.S., Jiang Y.Q., Wang J., Li J., Adaptability evaluation of distributed power sources connected to distribution network, IEEE Access, vol. 9, pp. 42409–42423 (2021), DOI: 10.1109/ACCESS.2021.3066206.
[15] Du J., Cai C., Xie Z.J., Geng M.Z., Comprehensive energy efficiency evaluation of municipal power grid based on TOPSIS method, 2020 5th Asia Conference on Power and Electrical Engineering, Chengdu, China, pp. 829–833 (2020).
[16] Xu J.Z., Tong G.Q., Chen Q.,Wu M., A new evaluation method of the fault recovery scheme for mediumlow voltage dc distribution network, 2020 5th Asia Conference on Power and Electrical Engineering, Chengdu, China, pp. 1730–1735 (2020).
[17] Cheng Y.M., Liu C., Wu J., Liu H.M., Lee I.K., Niu J., Cho J.P., Koo K.W., Lee M.W., Woo D.G., A back propagation neural network with double learning rate for PID controller in phase-shifted full-bridge soft-switching power supply, Journal of Electrical Engineering and Technology, vol. 15, no. 6, pp. 2811–2822 (2020), DOI: 10.1007/s42835-020-00523-5.
[18] Li J.J., Zhang M.Y., Li Z.G., Zhang T., Zhang Q., Chi C., Study on grid planning method considering multiple energy access, 2018 International Conference on Smart Grid and Electrical Automation, Changsha, China, pp. 59–62 (2018).
[19] Malengret M., Gaunt C.T., Active currents, power factor, and apparent power for practical power delivery systems, IEEE Access, vol. 8, pp. 133095–133113 (2020), DOI: 10.1109/ACCESS.2020.3010638.
[20] Wiczynski G., Determining location of voltage fluctuation source in radial power grid, Electric Power Systems Research, vol. 180, pp. 1–10 (2020), DOI: 10.1016/j.epsr.2019.106069.
[21] Hong Y., Bie Z.H., Li G.F., Liu S.Y., Berizzi A., The integrated reliability evaluation of distribution system considering the system voltages adjustment, 2017 1st IEEE International Conference on Environment and Electrical Engineering and 2017 17th IEEE Industrial and Commercial Power Systems Europe, Milan, Italy (2017).
[22] Truong D.N., Ngo V.T., Estimation of parameters associated with individual sources of voltage fluctuations, International Journal of Electrical Power and Energy Systems, vol. 65, no. 2, pp. 425–431 (2015), DOI: 10.1109/TPWRD.2020.2976707.
[23] Zhang W.M., Zhang Y.X., The reactive power and voltage control management strategy based on virtual reactance cloud control, Archives of Electrical Engineering, vol. 69, no. 4, pp. 921–936 (2020), DOI: 10.24425/aee.2020.134639.
[24] Bian H.H., Zhong Y.Q., Sun J.S., Shi F.C., Study on power consumption load forecast based on K-means clustering and FCM-BP model, Energy Reports, vol. 6, pp. 693–700 (2020), DOI: 10.1016/j.egyr.2020.11.148.
[25] Chen Z., Du Z.B., Zhan H.Q., Wang K., An evaluation method of reactive power and voltage control ability for multiple distributed generators in an islanded micro-grid, 2018 International Conference on Power System Technology, Guangzhou, China, pp. 1819–1825 (2018).
[26] Lin C.F., Fang C.Z., Chen Y.L., Liu S.Y., Bie Z.H., Scenario generation and reduction methods for power flow examination of transmission expansion planning, 2017 IEEE 7th International Conference on Power and Energy Systems, Toronto, Canada, pp. 90–95 (2017).

[1] Bolzern P., Fronza G., Role of weather inputs in short-term forecasting of electric load, International Journal of Electrical Power and Energy Systems, vol. 8, iss. 1, pp. 42–46 (1986).
[2] Chojnacki A.Ł., Chojnacka K.J., Reliability of electric power distribution networks, Publishing House of the Kielce University of Technology (in Polish), Kielce (2018).
[3] Chojnacki A.Ł., Analysis of operational reliability of electric power distribution networks, Publishing House of the Kielce University of Technology (in Polish), Kielce (2013).
[4] Chojnacki A., Reliability parameters and properties of MV/LV transformers, Electrical Review (in Polish), no. 4, pp. 74–77 (2008).
[5] Collins S., Deane P., Gallachoir B., Pfenninger S., Staffell I., Impacts of Inter-annual Wind and Solar Variations on the European Power System, Joule, vol. 2, iss. 10, pp. 2076–2090 (2018), DOI: 10.1016/j.joule.2018.06.020.
[6] Johnson M., Gorospe G., Landry J., Schuster A., Review of mitigation technologies for terrestrial power grids against space weather effects, International Journal of Electrical Power and Energy Systems, vol. 82, pp. 382–391 (2016), DOI: 10.1016/j.ijepes.2016.02.049.
[7] Migdalski J., Reliability engineering – handbook, ATR Bydgoszcz i Zetom Warszawa (in Polish) (1992).
[8] Military Standardization Handbook. Reliability Prediction of Electronic Equipment, MIL-HDBK 217B. U.S. Government Printing Office, Washington (1974).
[9] Narimani A., Nourbakhsh G., Ledwich G.F.,Walker G.R., Optimum electricity purchase scheduling for aggregator storage in a reliability framework for rural distribution networks, International Journal of Electrical Power and Energy Systems, vol. 94, pp. 363–373 (2018), DOI: 10.1016/j.ijepes.2017.08.001.
[10] Paliwal N.K., Singh A.K., Singh N.K., Short-term Optimal Energy Management in Stand-alone Microgrid With Battery Energy Storage, Archives of Electrical Engineering, vol. 67, no. 3, pp. 499–513 (2018), DOI: 10.24425/123659.
[11] Panteli M., Pickering C.,Wilkinson S., Dawson R., Mancarella P., Power System Resilience to Extreme Weather: Fragility Modeling, Probabilistic Impact Assessment, and Adaptation Measures, IEEE Transactions on Power Systems, vol. 32, iss. 5, pp. 3747–3757 (2017), DOI: 10.1109/TPWRS.2016.2641463.
[12] PN-N-50191:1993 Terminology of electrics – Reliability, quality of service.
[13] Sousa B.J.O., Humayun M., Pihkala A., Lehtonen M.I., Three-layer seasonal reliability analysis in meshed overhead and underground subtransmission networks in the presence of co-generation, International Journal of Electrical Power and Energy Systems, vol. 63, pp. 555–564 (2014), DOI: 10.1016/j.ijepes.2014.06.026.
[14] Stobiecki A., Analysis of the reliability parameters of medium voltage distribution transformers, Doctoral dissertation (in Polish), Kielce (2006).
[15] Stobiecki A., Failures of 15/0.4 kV transformers in the power grid, Energetics (in Polish), no. 2, pp. 89–92 (2004).

[1] Ren G., Liu J.,Wan J., Guo Y., Yu D., Overview of wind power intermittency: Impacts, measurements, and mitigation solutions, Applied Energy, vol. 204, pp. 47–65 (2017), DOI: 10.1016/j.apenergy.2017.06.098.
[2] https://gwec.net/global-wind-report-2019/, accessed March 2021.
[3] Lerner J., Grundmeyer M., Garvert M., The importance of wind forecasting, Renewable Energy Focus, vol. 10, no. 2, pp. 64–6 (2009).
[4] Li G., Shi J., On comparing three artificial neural networks for wind speed forecasting, Applied Energy, vol. 87, pp. 2313–2320 (2010).
[5] ChangW.Y., A literature review of wind forecasting methods, Journal of Power and Energy Engineering, vol. 2, no. 04, pp. 161–168 (2014), DOI: 10.4236/jpee.2014.24023.
[6] Barbosa de Alencar D., de Mattos Affonso C., Limão de Oliveira R.C., Moya Rodriguez J.L., Leite J.C., Reston Filho J.C., Different models for forecasting wind power generation: Case study, Energies, vol. 10, no. 12, 1976 (2017), DOI: 10.3390/en10121976.
[7] Kusiak A., Zhang Z., Short-horizon prediction of wind power: A data-driven approach, IEEE Transactions on Energy Conversion, vol. 25, no. 4, pp. 1112–1122 (2010), DOI: 10.1109/TEC.2010.2043436.
[8] Zhu X., Genton M.G., Short-term wind speed forecasting for power system operations, International Statistical Review, vol. 80, no. 1, pp. 2–23 (2012).
[9] Jónsson T., Pinson P., Nielsen H.A., Madsen H., Exponential smoothing approaches for prediction in real-time electricity markets, Energies, vol. 7, no. 6, pp. 3710–3732 (2014), DOI: 10.3390/en7063710.
[10] Hodge B.M., Zeiler A., Brooks D., Blau G., Pekny J., Reklatis G., Improved wind power forecasting with ARIMA models, Computer Aided Chemical Engineering, vol. 29, pp. 1789–1793 (2011), DOI: 10.1016/B978-0-444-54298-4.50136-7.
[11] Chen P., Pedersen T., Bak-Jensen B., Chen Z., ARIMA-based time series model of stochastic wind power generation, IEEE Transactions on Power Systems, vol. 25, no. 2, pp. 667–676 (2009).
[12] Kavasseri R.G., Seetharaman K., Day-ahead wind speed forecasting using f-ARIMA models,Renewable Energy, vol. 34, no. 5, pp. 1388–1393 (2009), DOI: 10.1016/j.renene.2008.09.006.
[13] Torres J.L., Garcia A., De Blas M., De Francisco A., Forecast of hourly average wind speed with ARMA models in Navarre (Spain), Solar energy, vol. 79, no. 1, pp. 65–77 (2005), DOI: 10.1016/j.solener.2004.09.013.
[14] Sfetsos A., A novel approach for the forecasting of mean hourly wind speed time series, Renewable energy, vol. 27, no. 2, pp. 163–174 (2002), DOI: 10.1016/S0960-1481(01)00193-8.
[15] Dumitru C.D., Gligor A., Daily average wind energy forecasting using artificial neural networks, Procedia Engineering, vol. 181, pp. 829–836 (2017), DOI: 10.1016/j.proeng.2017.02.474.
[16] Peiris A.T., Jayasinghe J., Rathnayake U., Forecasting Wind Power Generation Using Artificial Neural Network:“Pawan Danawi”—A Case Study from Sri Lanka, Journal of Electrical and Computer Engineering (2021), DOI: 10.1155/2021/5577547.
[17] Liu Y., Zhang H., An empirical study on machine learning models for wind power predictions, In 2016 15th IEEE International Conference on Machine Learning and Applications (ICMLA), pp. 758–763 (2016), DOI: 10.1109/ICMLA.2016.0135.
[18] RanganayakiV., Deepa S.N., An intelligent ensemble neural network model for wind speed prediction in renewable energy systems, The ScientificWorld Journal (2016), DOI: 10.1155/2016/9293529.
[19] Sapronova A., Meissner C., Mana M., Short time ahead wind power production forecast, Journal of Physics: Conference Series, vol. 749, no. 1, 012006 (2016), DOI: 10.1088/1742-6596/749/1/012006.
[20] López E., Valle C., Allende-Cid H., Allende H., Comparison of recurrent neural networks for wind power forecasting, In Mexican Conference on Pattern Recognition, pp. 25–34, Springer (2020), DOI: 10.1007/978-3-030-49076-8_3.
[21] Manero J., Béjar J., Cortés U., Predicting wind energy generation with recurrent neural networks, In International Conference on Intelligent Data Engineering and Automated Learning, pp. 89–98, Springer (2018), DOI: 10.1007/978-3-030-03493-1_10.
[22] Liu B., Zhao S., Yu X., Zhang L.,Wang Q., A novel deep learning approach for wind power forecasting based on WD-LSTM model, Energies, vol. 13, no. 18, pp. 4964 (2020), DOI: 10.3390/en13184964.
[23] Dong D., Sheng Z., Yang T.,Wind power prediction based on recurrent neural network with long shortterm memory units, In 2018 International Conference on Renewable Energy and Power Engineering (REPE), pp. 34–38 (2018), DOI: 10.1109/REPE.2018.8657666.
[24] Zeng J., QiaoW., Support vector machine-based short-termwind power forecasting, In 2011 IEEE/PES Power Systems Conference and Exposition, pp. 1–8 (2011), DOI: 10.1109/PSCE.2011.5772573.
[25] Wang J., Sun J., Zhang H., Short-term wind power forecasting based on support vector machine, In 2013 5th International Conference on Power Electronics Systems and Applications (PESA), pp. 1–5 (2013), DOI: 10.1109/PESA.2013.6828211.
[26] Li L.L., Zhao X., Tseng M.L., Tan R.R., Short-term wind power forecasting based on support vector machine with improved dragonfly algorithm, Journal of Cleaner Production, vol. 242, 118447 (2020), DOI: 10.1016/j.jclepro.2019.118447.
[27] Popławski T., Szel˛ag P., Bartnik R., Adaptation of models from determined chaos theory to short-term power forecasts for wind farms, Bulletin of the Polish Academy of Sciences: Technical Sciences, vol. 68, no. 6, pp. 1491–1501 (2020), DOI: 10.24425/bpasts.2020.135400.
[28] Zhu L., Shi H., Ding M., Gao T., Jiang Z., Wind power prediction based on the chaos theory and the GABP neural network, In 2019 IEEE Innovative Smart Grid Technologies-Asia (ISGT Asia), pp. 4221–4224 (2019), DOI: 10.1109/ISGT-Asia.2019.8881549.
[29] Wang C., Zhang H., FanW., Fan X., A new wind power prediction method based on chaotic theory and Bernstein Neural Network, Energy, vol. 117, pp. 259–271 (2016), DOI: 10.1016/j.energy.2016.10.041.
[30] Yuan X., Tan Q., Lei X., Yuan Y.,Wu X., Wind power prediction using hybrid autoregressive fractionally integrated moving average and least square support vector machine, Energy, vol. 129, pp. 122–137 (2017), DOI: 10.1016/j.energy.2017.04.094.
[31] Lau A., McSharry P., Approaches for multi-step density forecasts with application to aggregated wind power, The Annals of Applied Statistics, vol. 4, no. 3, pp. 1311–1341 (2010), DOI: 10.1214/09-AOAS320.
[32] Hwang M.Y., Jin C.H., Lee Y.K., Kim K.D., Shin J.H., Ryu K.H., Prediction of wind power generation and power ramp rate with time series analysis, In 2011 3rd International Conference on Awareness Science and Technology (iCAST), pp. 512–515 (2011), DOI: 10.1109/ICAwST.2011.6163182.
[33] Reddy V., Verma S.M., Verma K., Kumar R., Hybrid approach for short term wind power forecasting, In 2018 9th International Conference on Computing, Communication and Networking Technologies (ICCCNT), pp. 1–5 (2018), DOI: 10.1109/ICCCNT.2018.8494034.
[34] Jiang Y., Xingying C.H.E.N., Kun Y.U., Yingchen L.I.A.O., Short-term wind power forecasting using hybrid method based on enhanced boosting algorithm, Journal of Modern Power Systems and Clean Energy, vol. 5, no. 1, pp. 126–133 (2017), DOI: 10.1007/s40565-015-0171-6.
[35] Landberg L., A mathematical look at a physical power prediction model, Wind Energy, vol. 1, no. 1, pp. 23–28 (1998).
[36] ChangW.Y., A literature review of wind forecasting methods, Journal of Power and Energy Engineering, vol. 2, no. 04, pp. 161–168 (2014), DOI: 10.4236/jpee.2014.24023.
[37] Hanifi S., Liu X., Lin Z., Lotfian S., A critical review of wind power forecasting methods—past, present and future, Energies, vol. 13, no. 15, 3764 (2020), DOI: 10.3390/en13153764.
[38] Box G.E., Wilson K.B., On the experimental attainment of optimum conditions, Journal of the Royal Statistical Society. Series B. Methodological, vol. 13, pp. 1–45 (1951).
[39] Myers R.H., Montgomery D.C., Anderson-Cook C.M., Response surface methodology: process and product optimization using designed experiments, John Wiley & Sons (2016).
[40] Makridakis S., Winkler R.L., Averages of forecasts: Some empirical results, Management science, vol. 29, no. 9, pp. 987–996 (1983).