Title

The Effect of Water Mist Cooling of Casting Die on the Solidification, Microstructure and Properties of AlSi20 Alloy

Journal title

Archives of Metallurgy and Materials

Yearbook

2017

Volume

vol. 62

Issue

No 1

Authors

Władysiak, R. ; Pacyniak, T. ; Kozuń, A.

Divisions of PAS

Nauki Techniczne

Publisher

Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences

Date

2017

Identifier

DOI: 10.1515/amm-2017-0026 ; e-ISSN 2300-1909

Source

Archives of Metallurgy and Materials; 2017; vol. 62; No 1

References

Xu (2014), Influence of pressure and surface roughness on the heat transfer efficiency during water spray quenching of aluminum alloy, Mater Process Technol, 214. ; Władysiak (2013), Computer Control the Cooling Process in Permanent Mold Casting of Al Si Alloy, Arch Metall Mater, 58, 10, doi.org/10.2478/amm-2013-0114 ; Duggan (2015), Modelling the creation and destruction of columnar and equiaxed zones during solidification and melting in multi - pass welding of steel, Comput Mater Sci, 97. ; Władysiak (2010), Effect of water mist on cooling process of casting die and microstructure of alsi alloy, Arch Metall Mater, 11, 93. ; Yamagata (2008), Thermal and metallographic characteristics of the Si high - pressure die - casting alloy for monolithic cylinder blocks, Mater Process Technol, 20, 199. ; Nowak (6082), Water - Air Spray Cooling of Extruded Profiles : Process Integrated Heat Treatment of the Alloy EN, Mater Eng Perform, 22, 2580, doi.org/10.1007/s11665-013-0563-6 ; Rapiejko (2014), Effect Of Cr and V Alloy Additions on the Microstructure and Mechanical Properties of Am Magnesium Alloy, Arch Metall Mater, 60, 10. ; Heusler (2002), and Influence of alloying elements on the thermal analysis results of Al - Si cast alloys Feb, Light Met, 2, 17, doi.org/10.1016/S1471-5317(02)00009-3 ; Raghukiran (2015), Effect of scandium addition on the microstructure mechanical and wear properties of the spray formed hypereutectic aluminum - silicon alloys, Mater Sci Eng, 641. ; Yamagata (2008), The effect of average cooling rates on the microstructure of the Si high pressure die casting alloy used for monolithic cylinder blocks, Mater Process Technol, 20, 203. ; Kang (2015), Intensive riser cooling of castings after solidification, Mater Process Technol, 215. ; Karpe (2013), The influence of Si and V on the kinetics of phase transformation and microstructure of rapidly solidified Zr alloys, Min Metall Sect B Metall, 49, 83, doi.org/10.2298/JMMB130214023K ; Shabestari (2005), Thermal analysis study of the effect of the cooling rate on the microstructure and solidification parameters of aluminum alloy, Can Metall, 44, 305, doi.org/10.1179/cmq.2005.44.3.305 ; Bamberger (1986), and Some observations on dendritic arm spacing in Mg and Al - Cu alloy chill castings, Mater Sci, 21, 2781, doi.org/10.1007/BF00551489 ; Kaya (2007), Dendritic Growth in an Aluminum - Silicon Alloy, Mater Eng Perform, 16, 12, doi.org/10.1007/s11665-006-9002-2 ; Władysiak (2014), Effect of Water Mist Cooling on Microstructure of Hypereutectic Si Alloy, Arch Foundry Eng, 14, 117, doi.org/10.2478/afe-2014-0074 ; Hejazi (2010), A Cu - Cr alloy with nano and microscale Cr particles produced in a water - cooled copper mold, Int J Miner Metall Mater, 17, 629, doi.org/10.1007/s12613-010-0366-9 ; Wang (2014), Development and evaluation of a new rapid mold heating and cooling method for rapid heat cycle molding, Int J Heat Mass Transf, 78. ; Pillai (2004), A simple inexpensive technique for enhancing density and mechanical properties of Al - Si alloys, Mater Process Technol, 146, 338, doi.org/10.1016/j.jmatprotec.2003.11.022 ; Jones (1996), Cooling rates during rapid solidification from a chill surface, Mater Lett, 26, 133, doi.org/10.1016/0167-577X(95)00213-8 ; Chen (1998), Dendrite coarsening during directional solidification of alloys, Mater Sci Eng, 247. ; Kubiak (2011), Surface morphology in engineering applications : Influence of roughness on sliding and wear in dry fretting, Int, 44, 1427. ; Uzun (2004), Hardness and microstructural characteristics of rapidly solidified wt Si alloys, Alloys Compd, 8, 376. ; Zhu (2014), Microstructure evolution of spray - formed hypereutectic Al - Si alloys in semisolid reheating process China, Trans Nonferrous Met Soc, 24, 1766, doi.org/10.1016/S1003-6326(14)63251-9