The rheological property of asphalt is an important factor affecting the pavement performance of asphalt binder, and the fundamental reason for the change of asphalt rheological property is the strong evolution of asphalt material meso structure. However, the internal mechanism of rejuvenated asphalt mastic system is complex and its rules are difficult to grasp. Aiming to study the relationship between meso mechanical parameters and rheological parameters of rejuvenated asphalt mastic, the meso structure model of rejuvenated asphalt mastic was established and improved based on the discrete element method. Moreover, the meso parameters of the model were obtained by the objective function method, and then the influences of various factorswere studied to construct the mathematical constitutive model of rheological parameter modulus and meso mechanical parameters. Combing with the reliability of the improved Burgers model was verified based on the rheological test results of rejuvenated asphalt mastic. In addition, the virtual test of dynamic shear rheological dynamic frequency scanning was carried out on the asphalt mastic sample by particle flow software. By adjusting the mesomechanical parameters, the simulation results (complex shear modulus and phase angle)were consistent with the test results. This study clarified the relationship between mesomechanics and macro performance, and this model could be used to obtain the complex shear modulus of rejuvenated asphalt mastic under different types, filler-asphalt ratio and external force environments by adjusting particle flow, wall boundary and other conditions, which can greatly save the workload for the later research and provide a theoretical basis for production experiments.

Static liquefaction is a form of unstable behaviour of granular soil. It is most common in saturated loose sands under monotonically loaded undrained conditions. Predicting static liquefaction using an elastic-plastic model that incorporates the non-associated plastic flow rule and strain hardening is possible. The article briefly describes the unstable behaviour of saturated sand in undrained conditions under a monotonic load. A simple elastic-plastic model with deviatoric hardening and a Drucker–Prager load surface is presented. The constitutive relationships were programmed in a Python script. Simulations of triaxial tests under mixed stress-strain control demonstrated the model’s ability to predict various undrained sand responses, including fully stable responses (no liquefaction) and partial and complete liquefaction under triaxial compression and tension. Predicting static liquefaction is possible by properly selecting the proportions of the parameters involved in plastic potential and loading functions and the parameter A used in the deviatoric hardening rule of hyperbolic type.

The paper is related to the material behaviour of additively manufactured samples obtained by the direct metal laser sintering (DMLS) method from the AlSi10Mg powder. The specimens are subjected to a quasi-static and dynamic compressive loading in a wide range of strain rates and temperatures to investigate the influence of the manufacturing process conditions on the material mechanical properties. For completeness, an analysis of their deformed microstructure is also performed. The obtained results prove the complexity of the material behaviour; therefore, a phenomenological model based on the modified Johnson–Cook approach is proposed. The developed model describes the material behaviour with much better accuracy than the classical constitutive function. The resulted experimental testing and its modelling present the potential of the discussed material and the manufacturing technology.