The problem of the design of a perfect reduced-order unknown-input observer for standard systems is formulated and solved. The procedure of designing the observer using well-known canonical form is proposed and illustrated with a numerical example. Necessary and sufficient conditions for the solvability of the procedure are given.
This paper deals with an observer design for a p-cell chopper. The goal is to reduce drastically the number of sensors in such system by using an observer in order to estimate all the capacitor voltages. Furthermore, considering an instantaneous model of a p-cell chopper, an interconnected observer is designed in order to estimate the capacitor voltages. This is realized by using only the load current measurement. Simulation results are given in order to illustrate the performance of such observer. To demonstrate the validity of our approach, experimental results based on Digital Signal Processor (DSP) are presented.
The paper recapitulates recently conducted investigations of non-proportional Luenberger observers, applied to reconstruction of state variables of induction motors. Three structures of non-proportional observers are analyzed, a proportional-integral observer, modified integral observer and observer with integrators. Criteria for gain selection of the observer are described, classical ones based on poles, as well as additional, increasing observer’s robustness. Fulfilment of the presented criteria can be ensured with the three proposed methods for gain selection, two analytical, based on dyadic transformation and one based on optimization.
The paper presents the method and results of measurements carried out at four secular points: P, — Wilczekodden, P2 — Hyttevika, P3 — Gashamna and P4 — Treskelodden. No essential changes were found in the distribution of the anomalous field ΔT with respect to the results of observations made in 1979.
The article proposes a new method of reproducing the angular speed of the rotor of a cage induction machine designed for speed observers based on the adaptive method. In the proposed solution, the value of the angular speed of the rotor is not determined by the classical law of adaptation using the integrator only by an algebraic relationship. Theoretical considerations were confirmed by simulation and experimental tests.
The Bulletin of the Polish Academy of Sciences: Technical Sciences (Bull.Pol. Ac.: Tech.) is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred: Artificial and Computational Intelligence, Biomedical Engineering and Biotechnology, Civil Engineering, Control, Informatics and Robotics, Electronics, Telecommunication and Optoelectronics, Mechanical and Aeronautical Engineering, Thermodynamics, Material Science and Nanotechnology, Power Systems and Power Electronics.
Journal Metrics: JCR Impact Factor 2018: 1.361, 5 Year Impact Factor: 1.323, SCImago Journal Rank (SJR) 2017: 0.319, Source Normalized Impact per Paper (SNIP) 2017: 1.005, CiteScore 2017: 1.27, The Polish Ministry of Science and Higher Education 2017: 25 points.
Abbreviations/Acronym: Journal citation: Bull. Pol. Ac.: Tech., ISO: Bull. Pol. Acad. Sci.-Tech. Sci., JCR Abbrev: B POL ACAD SCI-TECH Acronym in the Editorial System: BPASTS.
The Bulletin of the Polish Academy of Sciences: Technical Sciences (Bull.Pol. Ac.: Tech.) is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred: Artificial and Computational Intelligence, Biomedical Engineering and Biotechnology, Civil Engineering, Control, Informatics and Robotics, Electronics, Telecommunication and Optoelectronics, Mechanical and Aeronautical Engineering, Thermodynamics, Material Science and Nanotechnology, Power Systems and Power Electronics.
Journal Metrics: JCR Impact Factor 2018: 1.361, 5 Year Impact Factor: 1.323, SCImago Journal Rank (SJR) 2017: 0.319, Source Normalized Impact per Paper (SNIP) 2017: 1.005, CiteScore 2017: 1.27, The Polish Ministry of Science and Higher Education 2017: 25 points.
Abbreviations/Acronym: Journal citation: Bull. Pol. Ac.: Tech., ISO: Bull. Pol. Acad. Sci.-Tech. Sci., JCR Abbrev: B POL ACAD SCI-TECH Acronym in the Editorial System: BPASTS.
A kind of generalized proportional-integral(GPI) observer for descriptor linear systems is introduced. We first propose two complete parametric solutions to generalized Sylvester matrix equation corresponding to the left eigenvector matrices in the case of Jordan form. Then a parametric design approach for the observer is presented. The proposed method provides all parametric expression of the gain matrices and the corresponding finite left eigenvector matrix and guarantees the regularity and impulse-freeness of the expanded error system. Two numerical examples are given to explain the design procedure and illustrate the effectiveness of the proposed method.
Automation of earth moving machineries is a widely studied problem. This paper focusses on one of the main challenges in automation of the earth moving industry, estimation of loading torque acting on the machinery. Loading torque acting on the excavation machinery is a very significant aspect in terms of both machine and operator safety. In this study, a disturbance observer-assisted control system for the estimation of loading torque acting on a robotic backhoe during excavation process is presented. The proposed observer does not use any acceleration measurements, rather, is proposed as a function of joint velocity. Numerical simulations are performed to demonstrate the effectiveness of the proposed control scheme in tracking the reaction torques for a given dig cycle. Co-simulation experiments demonstrate robust performance and accurate tracking of the proposed control in both disturbance torque and position tracking. Further, the performance and sensitivity of the proposed control are also analyzed through the help of performance error quantifiers, the root-mean-square (RMS) values of the position and disturbance tracking errors.
The observation inflation effect consists in the fact that observing an action being performed can create false memories that this action has actually been performed by the observer. The present study examined the relationship between this effect and interrogative suggestibility. A procedure based on the Gudjonsson Suggestibility Scale was used to assess two kinds of suggestibility: the tendency to yield to suggestive questions (Yield) and the tendency to change answers after feedback (Shift). The participants first watched a film depicting a woman performing simple activities and performed various activities themselves during the film. In order to determine whether the observation inflation effect occurred, the participants performed a source-monitoring test. The observation inflation effect was replicated. Observation inflation correlated positively with Yield but not with Shift. This pattern of results can be explained by the fact these two indicators are different aspects of interrogative suggestibility. Shift is more related to social influence, while Yield is more cognitive in its nature.
The paper focuses on the problem of robust fault detection using analytical methods and soft computing. Taking into account the model-based approach to Fault Detection and Isolation (FDI), possible applications of analytical models, and first of all observers with unknown inputs, are considered. The main objective is to show how to employ the bounded-error approach to determine the uncertainty of soft computing models (neural networks and neuro-fuzzy networks). It is shown that based on soft computing models uncertainty defined as a confidence range for the model output, adaptive thresholds can be described. The paper contains a numerical example that illustrates the effectiveness of the proposed approach for increasing the reliability of fault detection. A comprehensive simulation study regarding the DAMADICS benchmark problem is performed in the final part.
The paper presents a solution for sensorless field oriented control (FOC) system for five-phase induction motors with improved rotor flux pattern. In order to obtain the advantages of a third harmonic injection with a quasi-trapezoidal flux shape, two vector models, α1–β1 and α3–β3, were transformed into d1–q1, d3–q3 rotating frames, which correlate to the 1st and 3rd harmonic plane respectively. A linearization approach of the dual machine model in d–q coordinate frames is proposed by introducing a new additional variable “x” which is proportional to the electromagnetic torque. By applying the static feedback control law, a dual mathematical model of the five-phase induction motor was linearized to synthesize a control system in which the electromagnetic torque and the rotor flux can be independently controlled. The results shows the air gap flux shape in steady as well transient states under various load conditions. Moreover, the implemented control structure acquires fault tolerant properties and leads to possible emergency running with limited operation capabilities. The fault-tolerant capability of the analyzed machine was guaranteed by a special implemented control system with a dedicated speed observer, which is insensitive to open-phase fault situation. The experimental tests have been performed with single and double-open stator phase fault. A torque measurement was implemented to present the mechanical characteristics under healthy and faulty conditions of the drive system.