Scanning probe microscopy (SPM) since its invention in the 80’s became very popular in examination of many different sample parameters, both in university and industry. This was the effect of bringing this technology closer to the operator. Although the ease of use opened a possibility for measurements without high labour requirement, a quantitative analysis is still a limitation in Scanning ProbeMicroscopes available on the market. Based on experience of Nano-metrology Group, SPM still can be considered as a tool for quantitative examination of thermal, electrical and mechanical surface parameters. In this work we present an ARMScope platform as a versatile SPM controller that is proved to be useful in a variety of applications: fromatomic-resolution STM (Scanning TunnellingMicroscopy) toMulti-resonance KPFM (Kelvin Probe force microscopy) to commercial SEMs (Scanning electron microscopes).
Sound intensity measurements using special sensors in a form of pressure-velocity and pressure-pressure probes are becoming more and more often the method of choice for characterization of sound sources. Its wider usability is blocked by the probes’ costs. This paper is on a possible modification of the well-known pressure-pressure sound intensity measurement method. In the proposed new approach a synchronized measurement procedure using only single microphone is used. The paper presents the basics of the sound intensity theory, a review of currently usedmethods of intensity measurement and requirements and limitations of the new method. In the proposed approach one microphone and a properly designed positioning system is used. The application of the method to study the directional characteristics of an active loudspeaker system have been described in detail. The obtained results were compared with those of measurements performed with a commercial p–u probe. The paper contains conclusions indicating advantages of the applied method in comparison with standard pressure measurement methods.
Due to the skin effect of eddy currents, the depth of cracks which can be detected by the traditional eddy current probe is very limited. In order to improve the ability of eddy current probes to inspect deep cracks in metal thick-walled structures, a new eddy current probe using an excitation system with phase shifted fields was proposed. Its feasibility for detecting deep cracks was verified by simulation and experiments. The results showed that the penetration depth of eddy currents in austenitic stainless steel is effectively enhanced by using the new probe.
The present study was aimed to establish a novel TaqMan real-time PCR (RTm-PCR) for detecting and typing bovine viral diarrhea virus (BVDV), and also to develop a diagnostic proto- col which simplifies sample collection and processing. Universal primers and TaqMan-MGB probes were designed from the known sequences of conserved 5′ - and 3′-untranslated regions (5’UTR, 3’UTR) of the NADL strain of BVDV. Prior to optimizing the assay, cDNAs were tran- scribed in vitro to make standard curves. The sensitivity, specificity and stability (reproducibility) were evaluated. The RTm-PCR was tested on the 312 feces specimens collected from persistently infected (PI) calves. The results showed the optimum conditions for RTm-PCR were 17.0 μmol/L primer, 7.5 μmol/L probe and 51.4°C annealing temperature. The established TaqMan RTm-PCR assay could specially detect BVDV without detecting any other viruses. Its detection limit was 1.55×100 copies/μL for viral RNA. It was 10000-fold higher than conventional PCR with excel- lent specificity and reproducibility. 312 samples were tested using this method and universal PCR from six dairy farms, respectively. Positive detections were found in 49 and 44 feces samples, respectively. The occurrence rate was 89.80%. In conclusion, the established TaqMan RTm-PCR could rapidly detect BVDV and effectively identify PI cattle. The detection limit of RTm-PCR was 1.55 copies/μL. It will be beneficial for enhancing diagnosis and therapy efficacy and reduce losses in cattle farms.
Ti-containing steel weld metals with Al contents of 0.01-0.085% were prepared. The effects of Al contents on the inclusions evolution were investigated by means of thermodynamic calculations coupled with electron probe micro-analyses and transmission electron microscopy. The results show that the inclusions in the 0.01% Al weld metal are mainly composed of ilmenite with some amounts of (Mn-Si-Al)-oxide and titanial_spinel. When Al content is increased up to 0.035%, a more amount of corundum and a small amount of pseudobrookite are formed. In 0.085% Al weld metal, the (Mn-Si-Al)-oxide disappears completely, and the inclusions contain a substantial amount of corundum, in addition to a minimal amount of pseudobrookite. Ti3O5, MnTi2O4 and MnTiO3 are the primary constituents of pseudobrookite, titanial_spinel and ilmenite, respectively. Titanial_spinel and ilmenite have higher amounts of Mn, but lower Ti levels compared with pseudobrookite. In the case of presence of a considerable amounts of titanial_spinel and ilmenite, Mn-depleted zone is formed in matrix around the inclusions.