The author discusses the problem of reference of (nominal, verbal, adjectival groups, and adverbial) sentence components realized within coordinate relationships. Initially, the author refers to the theory of compactness as an explanation of the processes of generating coordinate constructions in the structure of simple sentences. There are evidences in favor of the thesis that the compactness theory does not explain coordination in semantic aspect. This applies not only to the structure with the main predicate with plural distribution (valence), but also to the entire range of coordination. The author distinguishes two types of references of coordinated phrases (in structure of a simple sentence): a distributional and a collective one. The constructional and semantic peculiarities of the expressions of both types have been described in relation to the contemporary Polish and Russian language.
This paper presents the results of computer simulations carried out to determine coordination numbers for a system of parallel cylindrical fibres distributed at random in a circular matrix according to twodimensional pattern created by random sequential addition scheme. Two different methods to calculate coordination number were utilized and compared. The first method was based on integration of pair distribution function. The second method was the modified sequential analysis. The calculations following from ensemble average approach revealed that these two methods give very close results for the same neighbourhood area irrespective of the wide range of radii used for calculation.
In this article the author attempts to define the specificity of the tools for development planning at the local level in the context of: institutional resources of community (gmina) (and means of strengthening them), models of public management as well as the specifics of the Polish public administration system and its ensuing dysfunctions. These dysfunctions rely mainly on a limited awareness of the need to create mechanisms of coordination for: socio-economics, spatial and financial planning. These factors contribute to a decrease in the effectiveness of measures for the development of communities. Socio-economic planning answers the question: WHAT we want to do in the community; spatial planning: WHERE we would like to carry out certain activities, and financial planning: HOW MUCH it will cost and where the financial sources are. We can see the theoretical causal links between the areas of development planning, therefore, the main purpose of this article is to offer conceptual framework and a relevant case study of Kraków serving as its validation attempt.
The EU member states have implemented excise duties on fuel and electricity according to the EU Energy Tax Directive. The purpose of these measures is to motivate a reduction in energy consumption by internalizing external costs of energy. The taxes on energy have success in inciting energy savings. Simultaneously, the price levels of energy in the EU member states have increased to levels significantly higher compared to other countries in the region and the world. The price increase is the result of a cumulative effect of excise duties and other taxes and mechanisms including feed-in tariffs and quota policies. While the Energy Tax Directive gives the member states a level of freedom in setting the exact duty rates, the minimal rates enforced on all member states are relatively high. The policy intends to limit competition between the states on low energy prices and arbitrage trading between countries. We examine the purchasing power for energy products relative to the per capita GDP for a wide set of countries countries within the EU and in the rest of the world. We can identify several groups or clusters of countries based on their GDP per capita and energy prices. The new member states of the EU face a unique combination of low or moderate GDP per capita and very high energy prices. Their relative purchasing power for energy is degraded to levels comparable or lower than the purchasing power in developing countries with significantly lower GDP per capita and underdeveloped energy infrastructure. The calibration of energy taxation in the EU at high price levels suitable for Western European economies with high per capita GDP is leading to strong negative social effects and increasing poverty in Eastern European member states. The current implementation of these policies does not recognize to a sufficient extent income levels, regional social inequalities, and the low price elasticity of demand for energy.
Orthogonal frequency division multiple access (OFDMA) in Long Term Evolution (LTE) can effectively eliminate intra-cell interferences between the subcarriers in a single serving cell. But, there is more critical issue that, OFDMA cannot accomplish to decrease the inter-cell interference. In our proposed method, we aimed to increase signal to interference plus noise ratio (SINR) by dividing the cells as cell center and cell edge. While decreasing the interference between cells, we also aimed to increase overall system throughput. For this reason, we proposed a dynamic resource allocation technique that is called Experience-Based Dynamic Soft Frequency Reuse (EBDSFR). We compared our proposed scheme with different resource allocation schemes that are Dynamic Inter-cellular Bandwidth Fair Sharing FFR (FFRDIBFS) and Dynamic Inter-cellular Bandwidth Fair Sharing Reuse-3 (Reuse3DIBFS). Simulation results indicate that, proposed EBDSFR benefits from overall cell throughput and obtains higher user fairness than the reference schemes.
Based on the respective characteristics of line-commutated converter high-voltage direct current (LCC-HVDC) and voltage-source converter high voltage direct cur- rent (VSC-HVDC), two additional emergency DC power support (EDCPS) controllers are designed, respectively. In addition a coordinated control strategy based on a hybrid multi-infeed HVDC system for EDCPS is proposed. Considering the difference in system recovery between LCC-HVDC and VSC-HVDC in EDCPS, according to the magnitude of the amount of potential power loss, the LCC-HVDC and VSC-HVDC priority issues of boosting power for EDCPS are discussed in detail. Finally, a hybrid three-infeed HVDC that consists of two parallel LCC-HVDCs and one VSC-HVDC that is built in PSCAD/EMTDC are simulated. The effectiveness of the proposed approach is verified based on this hybrid three-infeed HVDC system.
The loss of power and voltage can affect distribution networks that have a significant number of distributed power resources and electric vehicles. The present study focuses on a hybrid method to model multi-objective coordination optimisation problems for dis- tributed power generation and charging and discharging of electric vehicles in a distribution system. An improved simulated annealing based particle swarm optimisation (SAPSO) algorithm is employed to solve the proposed multi-objective optimisation problem with two objective functions including the minimal power loss index and minimal voltage deviation index. The proposed method is simulated on IEEE 33-node distribution systems and IEEE-118 nodes large scale distribution systems to demonstrate the performance and effectiveness of the technique. The simulation results indicate that the power loss and node voltage deviation are significantly reduced via the coordination optimisation of the power of distributed generations and charging and discharging power of electric vehicles.With the methodology supposed in this paper, thousands of EVs can be accessed to the distribution network in a slow charging mode.
The paper presents a detailed theoretical background for coordinate measurement uncertainty evaluation by means of Type B evaluation method, taking into account information on accuracy of a coordinate measuring system given with the formula for maximum permissible errors of length measurement and verification test results. A proposal for evaluation of the verification test results is made. A measurement model based on the point-plane distance equation is presented. A detailed analysis of the partial derivatives (sensitivity factors in an uncertainty budget) of the measurement model is presented. The analyses of measurement uncertainty for different geometrical characteristicswere conducted using this measurement model. Examples of uncertainty evaluation for geometrical deviations are presented: position of a point related to a datum plane and flatness in the case of convex or concave surfaces. The examples include detailed uncertainty budgets.
Coordinate Measurement Machines (CMMs) have been extensively used in inspecting mechanical parts with higher accuracy. In order to enhance the efficiency and precision of the measurement of aviation engine blades, a sampling method of profile measurement of aviation engine blade based on the firefly algorithm is researched. Then, by comparing with the equal arc-length sampling algorithm (EAS) and the equi-parametric sampling algorithm (EPS) in one simulation, the proposed sampling algorithm shows its better sampling quality than the other two algorithms. Finally, the effectiveness of the algorithm is verified by an experimental example of blade profile. Both simulated and experimental results show that the method proposed in this paper can ensure the measurement accuracy by measuring a smaller number of points.
The contradiction between the restriction of grating manufacturing technology and high-resolution measurement requirements has been the focus of attention. The precision requirement of angle calculation during the digital subdivision processing of a Moiré signal is focused on, the causes of errors in the solution of arcsine function are analysed, and an improved coordinate rotation digital computer (CORDIC)with double-rotation iteration is proposed by discussing the principle of the conventional CORDIC in detail herein. Because the iterative number and data width of the improved CORDIC are limited by the finite digital circuit resources and thus determine the calculation accuracy directly, subsequently the overall quantization error (OQE) of the improved CORDIC is analysed. The approximate error and rounding error of the algorithm are deduced, and the error models of iterative number and data width are established. The validity and application value of the improved CORDIC are proved through simulations and experiments involving a subdividing circuit. The corresponding relation between the approximate error, rounding error and iteration number, as well as the bit width are proved by quantization. The error of subdivision with the improved CORDIC, obtained through a calibration experiment, is within ±0.5′′ and the mean variance is 0.2′′. The results of the research can be applied directly to a digital subdivision system to guide the parameter setting in the iterative process, which is of crucial importance in the quantitative analysis of error separation and error synthesis.
Transverse effective thermal conductivity of the random unidirectional fibre-reinforced composite was studied. The geometry was circular with random patterns formed using random sequential addition method. Composite geometries for different volume fraction and fibre radii were generated and their effective thermal conductivities (ETC) were calculated. Influence of fibre-matrix conductivity ratio on composite ETC was investigated for high and low values. Patterns were described by a set of coordination numbers (CN) and correlations between ETC and CN were constructed. The correlations were compared with available formulae presented in literature. Additionally, symmetry of the conductivity tensor for the studied geometries of fibres was analysed.