Abstrakt
Composite Multimetal Stahl 1018 has been used in the process of preserving worn surfaces of materials operating in extremely difficult conditions. This work presents the results of simulation of the mechanical properties of steel samples in contact with the MM "Stahl 1018" composite. Tests were carried out for various models with with one- and two-sided contact sample models with the composite. Theoretical tests were conducted in the "SolidWorks 2019" environment. It was found that the maximum strength of the specimen layer made of MM "Stahl 1018" material, which closely adheres to the surfaces of steel bases on both sides (444 MPa) is higher than that of the material layer in one-sided contact (358 MPa), for specimens with a height of 4.5 mm and at 80 °C. Simulations also revealed a significant increase in the maximum stress in the composite MM "Stahl 1018" for specimens in the so-called free state from 285 MPa to 358 MPa with the increasing temperature from 20 °C to 80 °C, for specimens 4.5 mm high.
Przejdź do artykułu
Bibliografia
[1] Sołek, K., Kalisz, D., Arustamian, A. & Ishchenko, A.A. (2017). Analysis of srength characteristics of composite materials under vibration loads at higher temperatures. Journal of Machine Construction and Maintenance – Problemy Eksploatacji 93-97.
[2] Arustamian, A., Sołek, K. & Kalisz, D. (2016). Identyfication of yield point of polymer – based composite material in the conditions of increased temperatures. Archives of Metallurgy and Materials. 61(3), 1561-1566. DOI: 10.1515/amm-2016-0255
[3] Kalisz, D. & Arustamian A. (2020). Multimetal Stahl 1018 composite – structure and strength properties. Archives of Foundry Engineering. 20(4), 29-35. DOI: 10.24425/afe.2020.133351.
[4] Ischenko, A.A. (2012). Technological bases of restoration of the industrial equipment by modern polymeric materials PSTU (Mariupol). 27-39.
[5] Donev, K.V. (2007). Investigation of the properties of metalpolymer materials and the development of technology of repair roughing stand. Master's thesis, PSTU, Mariupol, Ukraine.
[6] Vorona, A.S. (2009) Theoretical and experimental research of the mechanical properties of polymer repair materials for different purposes. Master's thesis, PSTU, Mariupol, Ukraine.
[7] Kalinichenko, S.A. (2003) Research of the dynamic properties of metal-polymer materials. Master's thesis, PSTU, Mariupol, Ukraine.
[8] Timoschenko, A.V. (2010) Research of the mechanical properties of composite materials under dynamic loading. Master's thesis, PSTU, Mariupol, Ukraine.
[9] Kakareka, D.L. (2013) Research of the mechanical properties of composite materials under dynamic loading. Master's work, PSTU, Mariupol, Ukraine.
[10] Arusrtamian, A. (2023). Modeling and analysis of the mechanical properties of the composite based on a polymeric material used for the maintenance of metallurgical equipment. Doctoral thesis, AGH, Krakow, Poland.
[11] Diamant. Polymer Solutions. (2024). Retrieved January, 20, 2024, from http://diamant-polymer.de/en/products/mm1018/ 11.
[12] DIN EN ISO 604:2003-12, 2003.
[13] Stal C45 PN-EN 10083-2:1999
[14] Solidoworks.(2024). Retrieved January, 20, 2024, from https://discover.solidworks.com/
[15] Solidexpert. (2024). Retrieved December, 10, 2024 from https://solidworks.agh.edu.pl/
Przejdź do artykułu
pl
en
