Applied sciences

Archives of Control Sciences

Content

Archives of Control Sciences | 2022 | vol. 32 | No 3

Download PDF Download RIS Download Bibtex

Abstract

This paper presents the formulation and numerical simulation for linear quadratic optimal control problem (LQOCP) of free terminal state and fixed terminal time fractional order discrete time singular system (FODSS). System dynamics is expressed in terms of Riemann-Liouville fractional derivative (RLFD), and performance index (PI) in terms of state and costate. Because of its complexity, finding analytical and numerical solutions to singular system (SS) is difficult. As a result, we use coordinate transformation to convert FODSS to its corresponding fractional order discrete time nonsingular system (FODNSS). After that, we obtain the necessary conditions by employing a Hamiltonian approach. The relevant conditions are solved using the general solution approach. For the analysis of formulation and solution algorithm, a numerical example is illustrated. Results are obtained for various �� values. According to state of the art, this is the first time that a formulation and numerical simulation of free terminal state and fixed terminal time optimal control problem (OCP) of FODSS is presented.
Go to article

Authors and Affiliations

Tirumalasetty Chiranjeevi
1
Ramesh Devarapalli
2
ORCID: ORCID
Naladi Ram Babu
3
Kiran Babu Vakkapatla
4
R. Gowri Sankara Rao
5
Fausto Pedro Garcìa Màrquez
6

  1. Department of Electrical Engineering, Rajkiya Engineering College Sonbhadra, U.P., India
  2. Department of EEE, Lendi Institute of Engineering and Technology, Vizianagaram-535005, India
  3. Department of EEE, Aditya Engineering College, Surampalem, Andhra Pradesh, India
  4. Lingayas Institute of Management and Technology Madalavarigudem, A.P., India
  5. Department of EEE, MVGR College of Engineering Vizianagaram, A.P., India
  6. Ingenium Research Group, University of Castilla-La Mancha, Spain
Download PDF Download RIS Download Bibtex

Abstract

In this work, we modify the dynamics of 3-D four-wing Li chaotic system (Li et al. 2015) by introducing a feedback controller and obtain a new 4-D hyperchaotic four-wing system with complex properties. We show that the new hyperchaotic four-wing system have three saddle-foci balance points, which are unstable. We carry out a detailed bifurcation analysis for the new hyperchaotic four-wing system and show that the hyperchaotic four-wing system has multistability and coexisting attractors. Using integral sliding mode control, we derive new results for the master-slave synchronization of hyperchaotic four-wing systems. Finally, we design an electronic circuit using MultiSim for real implementation of the new hyperchaotic four-wing system.
Go to article

Authors and Affiliations

Sundarapandian Vaidyanathan
1
Khaled Benkouider
2
Aceng Sambas
3
ORCID: ORCID
Samy Abdelwahab Safaan
4 5

  1. School of Electrical and Computing, Vel Tech University, 400 Feet Outer Ring Road, Avadi, Chennai-600092, Tamil Nadu, India
  2. Non Destructive Testing Laboratory, Automatic Department, Jijel University, BP 98, 18000, Jijel, Algeria
  3. Department of Mechanical Engineering, Universitas Muhammadiyah Tasikmalaya, Tasikmalaya 46196, West Java, Indonesia
  4. Department of Natural and Applied Sciences, Community College of Buraydah, Qassim University, Buraydah, 52571, Saudi Arabia
  5. Nile Higher Institute for Commercial Science and Computer Technology, Mansoura, 35511, Egypt
Download PDF Download RIS Download Bibtex

Abstract

The paper presents an iterative identification method dedicated for industrial processes. The method consists of two steps. In the first step, a MISO system is identified with the Modulating Functions Method to obtain sub-models with a common denominator. In the second step, the obtained subsystems are re-identified. This procedure enables to obtain the set of models with different denominators of the transfer functions. The algorithmwas used for on-line identification of a glass conditioning process. Identification window is divided into intervals, in which the models can be updated based on recent process data, with the use of the integral state observer. Results of the performed simulations for the identified models are compared with the historical process data.
Go to article

Authors and Affiliations

Witold Byrski
1
Michał Drapała
1

  1. Department of Automatic Control and Robotics, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland
Download PDF Download RIS Download Bibtex

Abstract

This paper proposes a finite-time horizon suboptimal control strategy based on statedependent Riccati equation (SDRE) to control of F16 multirole aircraft. Flight stabilizer control of super maneuverable aircraft is modelled and simulated. For aircraft modelling purpose a full 6 DOF model is considered and described by nonlinear state-space approach. Also a stable state-dependent parametrization (SDP) necessary for solution of the SDRE control problem is proposed. Solution of the SDRE control problem with adequate defined weighting matrices in performance index shows possibility of fast and optimal aircraft control in finite-time. The method in this form can be used for stabilization of aircraft flight and aerodynamics.
Go to article

Authors and Affiliations

Marcin Chodnicki
1
Paweł Pietruszewski
1
Mariusz Wesołowski
1
Sławomir Stępień
2

  1. Air Force Institute of Technology, Ksiecia Bolesława 6, 01-494 Warsaw, Poland
  2. Poznan University of Technology, Institute of Automatic Control and Robotics, Piotrowo 3a, 60-965 Poznan, Poland
Download PDF Download RIS Download Bibtex

Abstract

The exponential decay of transient values in discrete-time nonlinear standard and fractional orders systems with linear positive linear part and positive feedbacks is investigated. Sufficient conditions for the exponential decay of transient values in this class of positive nonlinear systems are established. A procedure for computation of gains characterizing the class of nonlinear elements are given and illustrated on simple example.
Go to article

Authors and Affiliations

Tadeusz Kaczorek
1
ORCID: ORCID
Andrzej Ruszewski
1
ORCID: ORCID

  1. Bialystok University of Technology, Faculty of Electrical Engineering, Wiejska 45D,15-351 Białystok, Poland
Download PDF Download RIS Download Bibtex

Abstract

One of the most critical problems in all practical systems is the presence of uncertainties, internal and external disturbances, as well as disturbing noise, which makes the control of the system a challenging task. Another challenge with the physical systems is the possibility of cyber-attacks that the system’s cyber security against them is a critical issue. The systems related to oil and gas industries may also be subjected to cyber-attacks. The subsets of these industries can be mentioned to the oil and gas transmission industry, where ships have a critical role. This paper uses the Quantitative Feedback Theory (QFT) method to design a robust controller for the ship course system, aiming towards desired trajectory tracking. The proposed controller is robust against all uncertainties, internal and external disturbances, noise, and various possible Deception, Stealth, and Denial-of-Service (DOS) attacks. The robust controller for the ship system is designed using the QFT method and the QFTCT toolbox in MATLAB software. Numerical simulations are performed in MATLAB/Simulink for two case studies with disturbances and attacks involving intermittent sinusoidal and random behavior to demonstrate the proposed controller.
Go to article

Authors and Affiliations

Ali Soltani Sharif Abadi
1
Pooyan Alinaghi Hosseinabadi
2
Andrew Ordys
1
Michael Grimble
3

  1. Institute of Automatic Control and Robotics, Faculty of Mechatronics, Warsaw University of Technology, Warsaw, Poland
  2. School of Engineering and Information Technology, The University of New South Wales, Canberra, ACT, Australia
  3. Department of Electronic and Electrical Engineering, University of Strathclyde Glasgow, United Kingdom
Download PDF Download RIS Download Bibtex

Abstract

In this paper we present and discuss a new class of singular fractional systems in a multidimensional state space described by the Roesser continuous-time models. The necessary and sufficient conditions for the asymptotic stability and admissibility by the use of linear matrix inequalities are established. All the obtained results are simulated by some numerical examples to show the applicability and accuracy of our approach.
Go to article

Authors and Affiliations

Kamel Benyettou
1
Djillali Bouagada
1
ORCID: ORCID

  1. Department of Mathematics and Computer Science, ACSY Team-Laboratory of Pure and Applied Mathematics, Abdelhamid Ibn Badis University Mostaganem, P.O.Box 227/118 University of Mostaganem, 27000 Mostaganem, Algeria
Download PDF Download RIS Download Bibtex

Abstract

The ability of q-rung dual hesitant fuzzy sets (q-RDHFSs) in dealing with decision makers’ fuzzy evaluation information has received much attention. This main aim of this paper is to propose new aggregation operators of q-rung dual hesitant fuzzy elements and employ them in multi-attribute decision making (MADM). In order to do this, we first propose the power dual Maclaurin symmetric mean (PDMSM) operator by integrating the power geometric (PG) operator and the dual Maclaurin symmetric mean (DMSM). The PG operator can reduce or eliminate the negative influence of decision makers’ extreme evaluation values, making the final decision results more reasonable. The DMSM captures the interrelationship among multiple attributes. The PDMSM takes the advantages of both PG and DMSM and hence it is suitable and powerful to fuse decision information. Further, we extend the PDMSM operator to q-RDHFSs and propose q-rung dual hesitant fuzzy PDMSM operator and its weighted form. Properties of these operators are investigated. Afterwards, a new MADM method under q-RDHFSs is proposed on the basis on the new operators. Finally, the effectiveness of the new method is testified through numerical examples.
Go to article

Authors and Affiliations

Li Li
1
Jun Wang
2
ORCID: ORCID
Chunliang Ji
3

  1. School of Economics and Management, Beihang University, Beijing 100191, China
  2. School of Economics and Management, Beijing University of Chemical Technology, Beijing 100029, China
  3. School of Economics and Management, Beijing Jiaotong University, Beijing100044, China

Instructions for authors

Each paper submitted is subject to a review procedure, and the publication decision is based on reviers' comments on the paper. To avoid delay, please prepare the manuscript carefully following the suggestions listed below.

Computer file of the manuscript may be sent by e-mail to the address of Assistant Editor or acs@polsl.pl. Preferred text processors is TeX or LaTeX, however Word and other processors are also acceptable. In case of difficulties in processing the text, the author may be asked to supply the ASCII export of the original file.

Manuscripts sent via ordinary post should be typewritten double-spaced on one side of a standard size (A4) paper. Left side margin should be approximately 3cm (1.2'') wide. Each page should contain approximately 30 lines of 60 characters each. The manuscript including figures and tables together with their captions should be submitted. A separate signed letter giving the Author's preferred address for correspondence and return of proofs should be enclosed. Manuscript is the basis for editorial work.

First page should include the title of the paper, first name(s) and surname(s) of the Author(s), and a short summary (abstract), not longer than 20 lines.

Keywords of max. 5 - 7 items should be included in manuscript.

Numeration. All chapters, including the introduction, should be numbered in arabic numerals. Equations, tables and figures as well as theorems, corollaries, examples etc., should be numbered consecutively throughout the paper in arabic numerals, except in appendices. Appendices should be numbered with capital letters, and numeration should be closed within individual appendices.

If the manuscript is not prepared with TeX, mathematical expressions should be carefully written so as not to arouse confusion. Care should be taken that subscripts and superscripts are easily readable.

Tables and figures should be placed as desired by the Author within the text or on separate sheets with their suggested location indicated by the number of table or figure in the text. Figures, graphs and pictures (referred to as Fig. in the manuscript) should be numbered at the beginning of their caption following the figure. All figures should be prepared as PostScript EPS files or LaTeX picture files; in special cases, bitmaps of figure are also acceptable. The numbers and titles of tables should be placed above the main body of each table.

References should be listed alphabetically at the end of the manuscript. They should be numbered in ascending order and the numbers should be inserted in square brackets. References should be organized as follows. First initial(s), surname(s) of the author(s) and title of article or book. Then, for papers: title of periodical or collective work, volume number (year of issue), issue number, and numbers of the first and the last page; for books: publisher's name(s), place and year of issue. Example:

  1. R. E. Kalman: Mathematical description of linear dynamical system. SIAM J. Control. 1(2), (1963), 152-192.
  2. F. C. Shweppe: Uncertain dynamic systems. Prentice-Hall, Englewood Cliffs, N.J. 1970.


Please, give full titles of journals; only common words like Journal, Proceedings, Conference, etc. may be abbreviated ( to J., Proc., Conf., ... respectively). References to publications in the body of the manuscript should be indicated by the numbers of the adequate references in square brackets. When the paper is set in TeX the preferable form of preparing references is Bib TeX bib database.

Footnotes should be placed in the manuscript, beginning with "Received..." (date to be filled in by Editor), the author's institutional affiliation and acknowledgement of financial support,

This page uses 'cookies'. Learn more