IR spectroscopy, density and ultrasonic velocity measurements have been carried out for aluminum lithium phosphate glasses with and without MoO3. The observed changes in the FTIR spectra of the glasses were related to the modifier/former role of molybdenum ions. The results revealed that the density increases with increasing MoO<sub>3</sub> content, which was attributed to the increase in the compactness and packing of the glass network. The ultrasonic data were analyzed in terms of creation of new bonds of MoO<sub>3</sub> attached to phosphate units. The new bonds increased the average crosslink density and the number of network bonds per unit volume along with a strengthening of the different modes of vibrations which in its turn increased the ultrasonic velocity, the rigidity and hence the elastic moduli of the glasses.
The paper presents the results of studies on the influence of the 2010 Vistula flood on the humification process in the bottom sediments of the Goczałkowice Reservoir in southern Poland. Due to its location in the vicinity of farmlands, forests and urbanized areas, the Goczałkowice Reservoir is characterized by amplified and intense humification processes within its sediments. The studies were focused on the determining the influence of the flood wave containing organic and inorganic suspensions on these processes. Humic acids were analyzed using two spectroscopic methods: Electron Paramagnetic Resonance (EPR) and Fourier Transform Infrared Spectroscopy (FT-IR). Application of these methods allowed to determine the values of free radicals and of the g-factor, which are indicators of oxidation, aromatization and maturation of humic acids during the humification process, as well as the value of the 1650/1720 ratio, reflecting the dissociation of the COOH group to COO− and the formation of complexes of transitional metals with humic acids during the humification process.
The paper reports on the photoelectrical performance of the long wavelength infrared (LWIR) HgCdTe high operating temperature (HOT) detector. The detector structure was simulated with commercially available software APSYS by Crosslight Inc. taking into account SRH, Auger and tunnelling currents. A detailed analysis of the detector performance such as dark current, detectivity, time response as a function of device architecture and applied bias is performed, pointing out optimal working conditions.
Non-intentionally doped GaSb epilayers were grown by molecular beam epitaxy (MBE) on highly mismatched semi-insulating GaAs substrate (001) with 2 offcut towards (110). The effects of substrate temperature and the Sb/Ga flux ratio on the crystalline quality, surface morphology and electrical properties were investigated by Nomarski optical microscopy, X-ray diffraction (XRD) and Hall measurements, respectively. Besides, differential Hall was used to investigate the hole concentration behaviour along the GaSb epilayer. It is found that the crystal quality, electrical properties and surface morphology are markedly dependent on the growth temperature and the group V/III flux ratio. Under the optimized parameters, we demonstrate a low hole concentration at very low growth temperature. Unfortunately, the layers grown at low temperature are characterized by wide FWHM and low Hall mobility.
Insulin receptor substrate 2 (IRS-2) modulates the phosphatidylinositol 3-kinase (PI3K)/Akt pathway, which controls the suppression of gluconeogenic genes; IRS-2 is also a critical node of insulin signaling. Because of the high homology between pig and human IRS-2, we investigated the expression pattern and function of porcine IRS-2. QPCR and immunoblotting were used to detect the IRS-2 expression level in different tissues. There were high IRS-2 levels in the cerebral cortex, hypothalamus, and cerebellum in the central nervous system. In peripheral tissues, IRS-2 was expressed at relatively high levels in the liver. Immunohistochemistry analysis revealed that IRS-2 was mainly distributed in the hypothalamus and cerebral cortex. Furthermore, IRS-2 knockdown porcine hepatocytes and porcine aortic endothelial cells (PAECs) were generated. The IRS-2 knockdown induced abnormal expression of genes involved in glycolipid metabolism in hepatocytes and reduced the antiatherosclerosis ability in PAECs. In addition, we disrupted IRS-2 in porcine embryonic fibroblasts (PEFs) using the CRISPR/Cas9 genome editing system, before finally generating IRS-2 knockout embryos by somatic cell nuclear transfer (SCNT). Taken together, our results indicate that IRS-2 might be a valuable target to establish diabetes and vascular disease models in the pig.
In this paper the experimental results of piezoelectric and magnetostrictive ultrasonic stimulation are comparatively analyzed in the evaluation of impact damage in a graphite epoxy composite sample chosen for a round robin test. By comparing theoretical and experimental results, it is shown that the equivalent power of internal friction can reach some hundreds mill watt per a single crack.
Magnetoabsorption in far and mid IR ranges in double HgTe/CdHgTe quantum wells with inverted band structure has been studied in high magnetic fields up to 30 T. Numerous intraband and interband transitions have been revealed in the spectra and interpreted within axial 8 × 8 k·p model. Splitting of dominant magnetoabsorption lines resulting from optical transitions from hole-like zero-mode Landau level has been discovered and discussed in terms of a built-in electric field and collective phenomena.
Photoelectrical characteristics of scanning IR detectors with implemented time delay and integration mode are analyzed. A new “shifted cellular” layout of photosensitive elements in the FPA structure is proposed. Advantages of the new FPA configuration in terms of threshold sensitivity for small-size/point objects are demonstrated. The analysis is based on the Monte Carlo simulation of the diffusion process of photogenerated minority charge carriers in the photosensitive layer photodiode arrays. The analysis is performed taking into account the main photoelectric parameters of FPA elements: photosensitive layer thickness, diffusion length of charge carriers, optical absorption length, their design parameters: geometric sizes of FPA elements, diameters of p-n junctions, and design parameters of the optical system: optical-spot diameter.